search

Manuel83 / craftbeerpi3

Other
180 stars 169 forks source link

Touch screen #154

Open chrisbrucewilliams opened 7 years ago

chrisbrucewilliams commented 7 years ago

I'm planning to add a touch screen to my setup. Of course I could use the pi lcd which goes thru its own connection, but I was wondering if anyone has done this using an off the shelf touch screen and the HDMI port?

hauca commented 7 years ago

I run a Sceptre E165W-1600HC monitor with a AirBar by Neonode 15.6". Both plug right into (HDMI and USB) RPI no drivers or setup needed. Purchased both on Amazon

HooTsBrooklyn commented 6 years ago

I use a kuman 5 inch Resistive Touch Screen (https://smile.amazon.com/gp/product/B01F3EKJIA) on my fermentation chamber. I have it plugged into the HDMI for video, USB for power, and I had to use some jumper cables from the back terminals to the GPIO pins for the touch capability. I had to muck about with it for a bit to get it to work, but it looks and works great now.