search

Manuel83 / craftbeerpi3

Other
180 stars 172 forks source link

MAX31865 Dual Channel Code #187

Open KenCope opened 6 years ago

KenCope commented 6 years ago

Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(

lalo-uy commented 6 years ago

For the terminals in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157

you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2

2018-05-06 19:37 GMT-03:00 KenCope notifications@github.com:

Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j-xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .

KenCope commented 6 years ago

I have it set up that way. I thought it would work just like any other 31865. From what I’m gathering from Playin With Fusion is that it takes a different program.

Thanks.

From: Eduardo Spremolla notifications@github.com Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)

For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157

you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2

2018-05-06 19:37 GMT-03:00 KenCope notifications@github.com:

Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j-xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387106331, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6.

lalo-uy commented 6 years ago

Tray to set CS2 to 3.3v and connect the other as a normal Max31865 board to verify.

2018-05-07 21:36 GMT-03:00 KenCope notifications@github.com:

I have it set up that way. I thought it would work just like any other

  1. From what I’m gathering from Playin With Fusion is that it takes a different program.

Thanks.

From: Eduardo Spremolla notifications@github.com Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)

For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157

you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2

2018-05-06 19:37 GMT-03:00 KenCope notifications@github.com:

Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j- xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387106331, or mute the threadhttps://github.com/notifications/unsubscribe- auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387247988, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcRyedCqMM4NgRnxeRG8Z4dDx34CDks5twOiRgaJpZM4T0Od6 .

KenCope commented 6 years ago

What will applying 3.3V to CS2 do?

From: Eduardo Spremolla notifications@github.com Sent: Tuesday, May 8, 2018 7:56 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)

Tray to set CS2 to 3.3v and connect the other as a normal Max31865 board to verify.

2018-05-07 21:36 GMT-03:00 KenCope notifications@github.com:

I have it set up that way. I thought it would work just like any other

  1. From what I’m gathering from Playin With Fusion is that it takes a different program.

Thanks.

From: Eduardo Spremolla notifications@github.com Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)

For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157

you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2

2018-05-06 19:37 GMT-03:00 KenCope notifications@github.com:

Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j- xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387106331, or mute the threadhttps://github.com/notifications/unsubscribe- auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387247988, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcRyedCqMM4NgRnxeRG8Z4dDx34CDks5twOiRgaJpZM4T0Od6 .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387378282, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AglZ7DJsogLtDGqYLonkboPGgKAUfrYJks5twYffgaJpZM4T0Od6.

lalo-uy commented 6 years ago

Disable the second channel

2018-05-09 22:41 GMT-03:00 KenCope notifications@github.com:

What will applying 3.3V to CS2 do?

From: Eduardo Spremolla notifications@github.com Sent: Tuesday, May 8, 2018 7:56 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)

Tray to set CS2 to 3.3v and connect the other as a normal Max31865 board to verify.

2018-05-07 21:36 GMT-03:00 KenCope notifications@github.com:

I have it set up that way. I thought it would work just like any other

  1. From what I’m gathering from Playin With Fusion is that it takes a different program.

Thanks.

From: Eduardo Spremolla notifications@github.com Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)

For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157

you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2

2018-05-06 19:37 GMT-03:00 KenCope notifications@github.com:

Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe- auth/AK4bcTgvjddjKUwIF66j- xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387106331, or mute the threadhttps://github.com/notifications/unsubscribe- auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187# issuecomment-387247988, or mute the thread https://github.com/notifications/unsubscribe-auth/ AK4bcRyedCqMM4NgRnxeRG8Z4dDx34CDks5twOiRgaJpZM4T0Od6 .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387378282, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ AglZ7DJsogLtDGqYLonkboPGgKAUfrYJks5twYffgaJpZM4T0Od6.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387924767, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcXSnkZaNS9tzhPS_bL-aUcrBhjnqks5tw5rOgaJpZM4T0Od6 .