search

MarkusMcNugen / docker-qBittorrentvpn

Docker container which runs a headless qBittorrent client with WebUI and optional OpenVPN
https://hub.docker.com/r/markusmcnugen/qbittorrentvpn/
GNU General Public License v3.0
175 stars 93 forks source link

Unable to connect with port 8080 #77

Open matosc opened 3 years ago

matosc commented 3 years ago

Hi,

I can't connect to the web portal on 8080.

Based on the logs, it looks like a bug -- portainer stack includes WEBUI_PORT_ENV=8080
-- current log does not show the port, just ends at "defined as":
2020-10-28 09:16:32.708375 [info] WebUI port defined as -- the iptables configuration in the logs does not include port 8080 at all Coincidentally if I change the WEBUI PORT to 9091 for testing it does not get applied to the iptables

Full log below --- ===========================

2020-10-28 09:16:26.081571 [info] VPN_ENABLED defined as 'yes'

2020-10-28 09:16:26.185324 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/london.ovpn

dos2unix: converting file /config/openvpn/london.ovpn to Unix format...

2020-10-28 09:16:26.560692 [info] VPN remote line defined as 'uk-london.privacy.network 1198'

2020-10-28 09:16:26.649084 [info] VPN_REMOTE defined as 'uk-london.privacy.network'

2020-10-28 09:16:26.740275 [info] VPN_PORT defined as '1198'

2020-10-28 09:16:26.828177 [info] VPN_PROTOCOL defined as 'udp'

2020-10-28 09:16:26.918164 [info] VPN_DEVICE_TYPE defined as 'tun0'

2020-10-28 09:16:27.003678 [info] LAN_NETWORK defined as '192.168.100.0/24'

2020-10-28 09:16:27.092215 [info] NAME_SERVERS defined as '8.8.8.8,8.8.4.4,1.1.1.1,1.0.0.1'

2020-10-28 09:16:27.177308 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)

2020-10-28 09:16:27.263724 [info] Adding 8.8.8.8 to resolv.conf

2020-10-28 09:16:27.359544 [info] Adding 8.8.4.4 to resolv.conf

2020-10-28 09:16:27.449158 [info] Adding 1.1.1.1 to resolv.conf

2020-10-28 09:16:27.534856 [info] Adding 1.0.0.1 to resolv.conf

2020-10-28 09:16:27.614511 [info] Starting OpenVPN...

Wed Oct 28 09:16:27 2020 WARNING: file 'credentials.conf' is group or others accessibl

Wed Oct 28 09:16:27 2020 OpenVPN 2.4.4 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on May 14 2019

Wed Oct 28 09:16:27 2020 library versions: OpenSSL 1.1.1 11 Sep 2018, LZO 2.08

Wed Oct 28 09:16:27 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]37.235.97.7:1198

Wed Oct 28 09:16:27 2020 UDP link local: (not bound)

Wed Oct 28 09:16:27 2020 UDP link remote: [AF_INET]37.235.97.7:1198

Wed Oct 28 09:16:27 2020 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this

Wed Oct 28 09:16:27 2020 [london420] Peer Connection Initiated with [AF_INET]37.235.97.7:1198

Wed Oct 28 09:16:28 2020 OpenVPN ROUTE6: OpenVPN needs a gateway parameter for a --route-ipv6 option and no default was specified by either --route-ipv6-gateway or --ifconfig-ipv6 options

Wed Oct 28 09:16:28 2020 OpenVPN ROUTE: failed to parse/resolve route for host/network: 2000::/3

Wed Oct 28 09:16:28 2020 TUN/TAP device tun0 opened

Wed Oct 28 09:16:28 2020 do_ifconfig, tt->did_ifconfig_ipv6_setup=0

Wed Oct 28 09:16:28 2020 /sbin/ip link set dev tun0 up mtu 1500

Wed Oct 28 09:16:28 2020 /sbin/ip addr add dev tun0 10.60.112.6/24 broadcast 10.60.112.255

Wed Oct 28 09:16:28 2020 WARNING: OpenVPN was configured to add an IPv6 route over tun0. However, no IPv6 has been configured for this interface, therefore the route installation may fail or may not work as expected.

Wed Oct 28 09:16:28 2020 Initialization Sequence Completed

2020-10-28 09:16:32.708375 [info] WebUI port defined as

2020-10-28 09:16:32.793778 [info] LAN Network defined as 192.168.100.0/24

2020-10-28 09:16:32.878585 [info] Default gateway defined as 172.19.0.1

2020-10-28 09:16:32.962200 [info] ip route defined as follows...

0.0.0.0/1 via 10.60.112.1 dev tun0

default via 172.19.0.1 dev eth0

10.60.112.0/24 dev tun0 proto kernel scope link src 10.60.112.6

37.235.97.7 via 172.19.0.1 dev eth0

128.0.0.0/1 via 10.60.112.1 dev tun0

172.19.0.0/16 dev eth0 proto kernel scope link src 172.19.0.2

192.168.100.0/24 via 172.19.0.1 dev eth0

iptable_mangle 16384 0

ip_tables 32768 3 iptable_filter,iptable_raw,iptable_mangle

x_tables 53248 13 xt_conntrack,iptable_filter,nft_compat,xt_tcpudp,xt_addrtype,xt_nat,xt_comment,xt_connmark,iptable_raw,ip_tables,xt_MASQUERADE,iptable_mangle,xt_mark

2020-10-28 09:16:33.068391 [info] iptable_mangle support detected, adding fwmark for tables

2020-10-28 09:16:33.215032 [info] Docker network defined as 172.19.0.0/16

2020-10-28 09:16:33.406898 [info] iptables defined as follows...

-P INPUT DROP

-P FORWARD ACCEPT

-P OUTPUT DROP

-A INPUT -i tun0 -j ACCEPT

-A INPUT -s 172.19.0.0/16 -d 172.19.0.0/16 -j ACCEPT

-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT

-A INPUT -s 192.168.100.0/24 -i eth0 -p tcp -m tcp --dport 8999 -j ACCEPT

-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A OUTPUT -o tun0 -j ACCEPT

-A OUTPUT -s 172.19.0.0/16 -d 172.19.0.0/16 -j ACCEPT

-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT

-A OUTPUT -d 192.168.100.0/24 -o eth0 -p tcp -m tcp --sport 8999 -j ACCEPT

-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT

-A OUTPUT -o lo -j ACCEPT

Adding 0 group

groupadd: GID '0' already exists

Adding 0 user

useradd: UID 0 is not unique

2020-10-28 09:16:33.547344 [info] UMASK defined as '777'

2020-10-28 09:16:33.626286 [info] Starting qBittorrent daemon...

Logging to /config/qBittorrent/data/logs/qbittorrent-daemon.log.

2020-10-28 09:16:34.735489 [info] qBittorrent PID:

2020-10-28 09:16:34.784089 [info] Started qBittorrent daemon successfully...

matosc commented 3 years ago

Another issue thread had a fix for my problem. Need to use "WEBUI_PORT" instead of "WEBUI_PORT_ENV" .

hunkyn commented 3 years ago

I have the same issue as above. Tried using the WEBUI_PORT environment variable as well but that did not help. Has anyone has any other suggestions?

[UPDATE] Figured out the issue. I am using a VLAN in the server and was not able to access from other VLANs. Tried within the same VLAN and it works. Now I need to figure out to how to get it working in all the VLANs

kozak-codes commented 2 years ago

I have the same issue as above. Tried using the WEBUI_PORT environment variable as well but that did not help. Has anyone has any other suggestions?

[UPDATE] Figured out the issue. I am using a VLAN in the server and was not able to access from other VLANs. Tried within the same VLAN and it works. Now I need to figure out to how to get it working in all the VLANs

Did you ever figure that out?

hunkyn commented 2 years ago

I updated my rules to allow for the main LAN to be able to access this particular system and it works.