Ender 5 using the new creality 4.2.7 card and the new V2 touch screen (maybe the CR6 screen) - Githubissues

MarlinFirmware / Configurations

Configurations for Marlin Firmware

https://marlinfw.org

GNU General Public License v3.0

2.02k stars 3.36k forks source link

Ender 5 using the new creality 4.2.7 card and the new V2 touch screen (maybe the CR6 screen) #563

Closed axpaul closed 3 years ago

axpaul commented 3 years ago

Description

Recently, I bought this kit including the new touch screen normally dedicated to the ender 3. Having bought the creality 4.2.7 card, I thought it might work even if it's not the same structure, but I couldn't configure it on merlin. I think this screen is normally intended for cr6 lien : https://www.amazon.fr/Creality-pouces-tactile-niveau-imprimante/dp/B08RN5F5RQ/ref=sr_1_37?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=182P08CF9CY10&dchild=1&keywords=ender+3+upgrade&qid=1630682653&sprefix=ender+3+up%2Caps%2C164&sr=8-37

Configuration Details

Is it possible to have a configuration to run this screen with the settings of an ender 5 with a creality 4.2.7 board?

Manufacturer: Creality
Model: ender 5
Motherboard: Creality 4.2.7

Additional Information

I thank you for your work and do not hesitate to tell me if it is impossible or not

ellensp commented 3 years ago

That TFT is not supported in Marlin currently, but will once MarlinFirmware/Marlin#19958 is merged.

Duplicate of https://github.com/MarlinFirmware/Configurations/issues/554