MKS RUMBA32 use MKS OLED no working

MarlinFirmware / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

https://marlinfw.org

GNU General Public License v3.0

16.25k stars 19.23k forks source link

MKS RUMBA32 use MKS OLED no working #20273

Closed mks-viva closed 3 years ago

mks-viva commented 3 years ago

Bug Description

Use MKS RUMBA32 motherboard, connect MKS OLED0.96 display, but no working and i has add pin define to pins_RUMBA32_common.h file

#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
  #define LCD_PINS_DC                     PE13  // Set as output on init
  #define LCD_PINS_RS                     PE14  // Pull low for 1s to init
  // DOGM SPI LCD Support
  #define DOGLCD_A0                       LCD_PINS_DC
  #define DOGLCD_CS                       PE10
  #define DOGLCD_MOSI                     PE9
  #define DOGLCD_SCK                      PE12
#endif

Use 2560 motherboard and MKS OLED0.96 will working
I am run offical marlin bug-fix 2.0.x version

Configuration Files

Config and pin.zip

Issues : https://github.com/makerbase-mks/MKS-RUMBA32/issues/27

alex18881 commented 3 years ago

Also I can confirm exactly the same issue with BIGTREETECH SKR mini V1.1. Here's my configs: conf.zip

sjasonsmith commented 3 years ago

With the huge variety of displays available it is extremely difficult to have every display configured properly for every board. It would be most helpful if people using this hardware can contribute pull requests to help resolve the incompatibilities.

github-actions[bot] commented 3 years ago

This issue has had no activity in the last 30 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 7 days.

github-actions[bot] commented 3 years ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.