search

MarlinFirmware / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
https://marlinfw.org
GNU General Public License v3.0
16.27k stars 19.23k forks source link

bed leveling doesn't work #23789

Closed Enzo-Enz closed 2 years ago

Enzo-Enz commented 2 years ago

Did you test the latest bugfix-2.0.x code?

Yes, and the problem still exists.

Bug Description

Hi It is about a month I'm involved setting up bed leveling for my delta printer It level the bed I store settings but when I start printing the result is awful one side sticks to the bed other side no I don't know I missed a line which has to be enable or It is a bug but whatever is,I can't use my printer I use micro switch as probe there are photos and confing below please help me

9a98d435-cac1-471f-80b1-94c7add04392

41ceaf1f-036b-4036-bf19-a5a5ed552ad7

fd9b20c0-a2d3-471c-904a-9ce9b5653a0f

Bug Timeline

new

Expected behavior

No response

Actual behavior

No response

Steps to Reproduce

No response

Version of Marlin Firmware

2.0.9.3

Printer model

DIY delta printer

Electronics

skr pro v1.2/TMC2130

Add-ons

No response

Bed Leveling

ABL Bilinear mesh

Your Slicer

Cura

Host Software

SD Card (headless)

Additional information & file uploads

delta config.zip

ellensp commented 2 years ago

Whenever there are homing or leveling issues, we now ask everyone to follow a standard procedure to gather more information so that we're not just taking stabs in the dark. Here is the boilerplate:

Repeat this procedure, if needed, to demonstrate inconsistencies. From these logs we should hopefully get a better idea of what's going on with your machine.

Enzo-Enz commented 2 years ago

Whenever there are homing or leveling issues, we now ask everyone to follow a standard procedure to gather more information so that we're not just taking stabs in the dark. Here is the boilerplate:

  • Download Marlin bugfix-2.0.x to test with the latest code.
  • Enable DEBUG_LEVELING_FEATURE and M114_DETAIL and re-flash the firmware.
  • Connect to your printer from host software such as Cura, Printrun or Repetier Host.
  • Send M502 and M500 to ensure your Configurations are applied.
  • Issue the command M111 S247 to enable maximum logging.
  • Perform a G28 to do your standard homing procedure.
  • Do a G29 to probe the bed. This will also enable bed leveling.
  • Do some of the moves that revealed problems before. Take notes.
  • Copy the log output into a .TXT file and attach it to your next reply.

Repeat this procedure, if needed, to demonstrate inconsistencies. From these logs we should hopefully get a better idea of what's going on with your machine.

sorry is it ok to use esp3d webui instead of host software? because as you see my board sticks to the bottom and there is no space to connect usb cable

4487492d-847d-4f47-a897-ba76c38f2b1c

Enzo-Enz commented 2 years ago

Whenever there are homing or leveling issues, we now ask everyone to follow a standard procedure to gather more information so that we're not just taking stabs in the dark. Here is the boilerplate:

  • Download Marlin bugfix-2.0.x to test with the latest code.
  • Enable DEBUG_LEVELING_FEATURE and M114_DETAIL and re-flash the firmware.
  • Connect to your printer from host software such as Cura, Printrun or Repetier Host.
  • Send M502 and M500 to ensure your Configurations are applied.
  • Issue the command M111 S247 to enable maximum logging.
  • Perform a G28 to do your standard homing procedure.
  • Do a G29 to probe the bed. This will also enable bed leveling.
  • Do some of the moves that revealed problems before. Take notes.
  • Copy the log output into a .TXT file and attach it to your next reply.

Repeat this procedure, if needed, to demonstrate inconsistencies. From these logs we should hopefully get a better idea of what's going on with your machine.

Hi I used esp3d webui instead of host softwares and here is the result

detta auto bed leveling.txt

unfortunately I can't use my printer because of bed leveling doesn't work please help me

thinkyhead commented 2 years ago

This Issue Queue is for Marlin bug reports and development-related issues, and we prefer not to handle user-support questions here. (As noted on this page.) For best results getting help with configuration and troubleshooting, please use the following resources:

After seeking help from the community, if the consensus points to a bug in Marlin, then you should post a bug report.

github-actions[bot] commented 2 years ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.