[BUG] Power Loss Resume powers also not active extruders extruders at 180 C

[walterbux]

Did you test the latest bugfix-2.0.x code?

Yes, and the problem still exists.

Bug Description

Power Loss Resume powers also not active extruders extruders at 180 C. In my case I have a kraken extruder with only default Extruder active when doing a monocolour print. The Extruders 2,3 and 4 are cold and inactive before power loss. They are used in multicolour printing and are active one at a time, never all together to avoid oozing. On Power Resume the firmware improperly activates at 180 C celsius the extruders that were inactive before the power loss and continues correctly the print but the kraken powered extruders stain the print on resume and there is no solution to power off them.

Bug Timeline

No response

Expected behavior

Only extruder that is active before power loss should be powered on resume.

Actual behavior

Power Loss Resume powers also not active extruders extruders at 180 C.

Steps to Reproduce

Any print with only the default extruder active in a multiple extruder configuration.

Version of Marlin Firmware

2.0.9.3

Printer model

Prusa I3 type with Kraken extruder

Electronics

RAMPS 1.4 Arduino Mega

Add-ons

No response

Bed Leveling

UBL Bilinear mesh

Your Slicer

Prusa Slicer

Host Software

Repetier Host

Additional information & file uploads

Config.zip

[github-actions[bot]]

This issue has had no activity in the last 60 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 10 days.

[github-actions[bot]]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.