[FR] CHOPPER_DEFAULT_48V needed

MarlinFirmware / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

https://marlinfw.org

GNU General Public License v3.0

16.28k stars 19.23k forks source link

[FR] CHOPPER_DEFAULT_48V needed #24317

Open Temtaime opened 2 years ago

Temtaime commented 2 years ago

Is your feature request related to a problem? Please describe.

No response

Are you looking for hardware support?

tmc5160 hv drivers fysetc spider v2.2 board

Describe the feature you want

New fysetc tmc5160 hv drivers with fysetc spider v2.2 board are capable of 48v.

Additional context

No response

thisiskeithb commented 2 years ago

Have you tried the existing chopper parameters or have some known-good/tested values that work well with 48V?

Temtaime commented 2 years ago

I don't know how to verify/adjust these values. So currently i'm sticking to 36v :(