search

MarlinFirmware / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
https://marlinfw.org
GNU General Public License v3.0
15.97k stars 19.09k forks source link

[BUG] New encoder logic & debounce (#26723) bricks #27077

Closed classicrocker883 closed 3 weeks ago

classicrocker883 commented 3 weeks ago

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

Upon flashing new firmware, stuck on starting screen.

Bug Timeline

New encoder logic & debounce (#26723)

Expected behavior

Expect to start normally, to main menu

Actual behavior

Flashes, but does not boot past starting menu

Steps to Reproduce

  1. Compile with E3V2 DWIN LCD, (e.g. ProUI)
  2. Load on SD, then flash
  3. Observe LCD

Version of Marlin Firmware

bugfix-2.1.x

Printer model

No response

Electronics

No response

LCD/Controller

No response

Other add-ons

No response

Bed Leveling

None

Your Slicer

None

Host Software

None

Don't forget to include

Additional information & file uploads

No response

thisiskeithb commented 3 weeks ago

@dbuezas: Can you take a look at this?

ellensp commented 3 weeks ago

Please attach your configuration files.

classicrocker883 commented 3 weeks ago

im going to say false alarm for now. there was something i missed to check. but I can affirm a different type almost similar bug with ProUI