Closed rainito closed 6 years ago
To setup Marlin for the Cyclops in non-mixing mode, set EXTRUDERS
to 2 and enable SINGLE_NOZZLE
.
If you want to setup Marlin in mixing extruder mode (which is not really recommended for the Cyclops since it's not a mixing extruder), you need to disable SINGLE_NOZZLE
, set EXTRUDERS
to 1, enable MIXING_EXTRUDER
, and set MIXING_STEPPERS
to 2.
Ok thanks. And for the question of the 3 extruder if i set 2 extruder? Maybe a bug?
For your third question, did you set EXTRUDERS
to 2 with MIXING_EXTRUDER
enabled and MIXING_STEPPERS
set to 2? If so, then seeing three extruders makes sense as one of the EXTRUDERS
is the MIXING_EXTRUDER
(which has two steppers), and that leaves one more from EXTRUDERS
.
This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.
hi to all am i using a cyclops extruder with two stepper motor that they push the two filaments in to the cyclops extruder. the problems are:
1)if i set 2 extruder with single nozzle function,it's ok but if i try to activate the mixing extruder function, the marlin give me the error that the mixing extruder is compatible only with one extruder and give me a sea of errors 2)if i set one extruder,the marlin give me the problem that the single nozzle function in not compatible with one extruder but i cancel the error with // but the real problem is in the lcd printer i have only one extruder and i can't controll the second stepper motor. and the last: 3)if i set 2 extruders, in the lcd i see extruder 0-1 and 2(so 3 extruder) the 0 and 1 are for first extruder and the 2 in for second. i don't know why!!!
how can i fix these problems?
My whole damn Configuration.h
```cpp /** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see