After homing X axis won't move

MarlinFirmware / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

https://marlinfw.org

GNU General Public License v3.0

16.14k stars 19.2k forks source link

After homing X axis won't move #960

Closed davidtuerk closed 9 years ago

davidtuerk commented 10 years ago

If the X carriage is in the middle, and I home it and then try homing X again nothing happens, It sounds like the printer wants to move it out and then back in like it is supposed to but It can't. I am completely stumped with this. The stock Makerfarm Firmware works perfectly but I cannot use it cause it is not updated for auto bed leveling. I should add that sometimes it works and sometimes it doesn't. I think this might be a bug in the auto bed leveling. My printer is a Makerfarm Prusa i3 (summer 2013).

boelle commented 9 years ago

still having this issue?

davidtuerk commented 9 years ago

Nope I found the issue! It was my endstops having a min and a max Sent from my BlackBerry 10 smartphone on the Koodo network. From: Bo HerrmannsenSent: Friday, December 19, 2014 4:11 PMTo: ErikZalm/MarlinReply To: ErikZalm/MarlinCc: davidtuerkSubject: Re: [Marlin] After homing X axis won't move (#960)still having this issue?

—Reply to this email directly or view it on GitHub.

boelle commented 9 years ago

ok, closing this one then

github-actions[bot] commented 2 years ago

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.