The sensor does not work.

MartinPham / ring-integration-modified

35 stars 0 forks source link

The sensor does not work. #6

Open sblogoshs opened 4 months ago

sblogoshs commented 4 months ago

For some time now, ringing has no longer been recognized. The sensor does not work.

ar5627 commented 4 months ago

It happens the same to me. No state changes are detected in the doorbell sensor. Thanks for your work

TomParis01 commented 3 months ago

Also resetting the integration does not work sadly :/

sblogoshs commented 3 months ago

Switched to the add-on (https://github.com/tsightler/ring-mqtt-ha-addon) today, also works with Ring Intercom. Ring Intercom (must set "enable_cameras" config option to "true") This is the only important option if the HA-MQTT-Broker (Mosquitto) is already installed.

TomParis01 commented 3 months ago

@sblogoshs Well for that solution I would need yet another Docker container, just for one Ring device. I guess nobody works on this (dockerless) addon anymore that's why you closed the (still open) issue?

TomParis01 commented 3 months ago

Ring Intercom integration has now been officially added into Homeassistant 2024.04 but at least for me it is way too slow to update the status after ringing the doorbell. @MartinPham Any chance that you will fix your integration?

open1999 commented 3 months ago

@TomParis01

Ring MartinPharm, sensor ding : not OK since few weeks,
Ring Intercom officially, sensor ding : not OK,
Ring MQTT, sensor ding : OK.

I used MartinPharm integration, now I use ring mqtt (docker).