search

Masuzu / ZooeyBot

Fully automated slime blasting, event and quest farming bot for GBF
https://gbtools.azurewebsites.net/ZooeyBot/en/Home
67 stars 42 forks source link

Stuck on calibration? #37

Closed Kasenff closed 7 years ago

Kasenff commented 7 years ago

I am going to the quest screen and it just stays on calibrating now sure how long its supposed to take, I have let it sit for about 10 minutes and nothing is changing. I have everything up to date as well.

Help?

Sarasena commented 7 years ago

I have the same problem over here too and it got closed before it was discussed more in-depth: https://github.com/Masuzu/ZooeyBot/issues/34

(It's either stuck in calibration or good to go without any further instructions despite not having scaling issues.)

MagCat commented 7 years ago

Don't enable Viramate option in .ini, it's bugged. When it calibrates, either go to Home Page then go back to Quest Page to update (or refresh Quest Page).

Sarasena commented 7 years ago

I find that even with that set to false, it isn't the cause either. I took a video to show the problem and even removed Viramate. The only way for me to fix it is to restart chrome every single time I close or want to open Zooeybot just for it to work.

In this video, I just opened a new Google Chrome session and restarted Zooeybot ID for good measure. You can see that it works fine. However, once I close it, refresh ID and reopen, it gets stuck on Calibration. Even if I go from Home -> Quest (not shown in vid) or Refresh. This is the 100% way for me to replicate this issue. I also checked if Zooeybot is in Task Manager (not shown in vid) and it's not in there, so I know for sure that it closed.

If I play GBF for a while before deciding to go bot mode, I will get eternal Calibration problem even without executing it first.

Again, I do not have scaling issues, I can use Pokerbot just fine and Vertical Offset is visible on the command line this time. Sometimes it just tells me good to go but without Vertical offset or the rest of the instructions. I will try to get a video of that next time.

https://youtu.be/q5yIMNjiD3c

Masuzu commented 7 years ago

@Kasenff Please see https://github.com/Masuzu/ZooeyBot/issues/34

@Sarasena In the last video, there is no issue. The calibration won't work unless during the initialization, all the "3 steps" are passed (in your video on the second run, you only reach the initialization step 2/3). In this case the solution is easy: just close the Chrome DevTools window (press F12) before restarting the bot, then reopen it. Do not navigate to the Quest menu before the 3 initialization steps are complete or else it will be stuck during the calibration. Hence the green console message "Good to go" which tells you when the bot is ready to move on to the calibration phase.

Masuzu commented 7 years ago

@MagCat The Viramate option is not related to the calibration though. I have been using it from the start (to use Viramate skill shorcuts).