Failure to detect USB Flash drive files/folder

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Have cios_usb beta 3 installed
2. Downloaded Freespace2 Wii onto SD card.
3. Only the 8 Freespace 2 files specified in readme are in Freespace2\ 
folder on a USB 16 Gig flash drive.

What is the expected output? What do you see instead?
For the folder and files to be detected on launch(they are not)

What version of the product are you using? On what operating system?
Freespace2Wii beta 3, Wii

Please provide any additional information below.
The files are copied from a clean install, no patches..
Does it need to be patched first?

Original issue reported on code.google.com by GodNn...@gmail.com on 11 Jun 2009 at 8:58

[GoogleCodeExporter]

Um... I also have 4.0 Waninoko firmware.. 
Not sure what else could cause my problem.. 

Original comment by GodNn...@gmail.com on 15 Jun 2009 at 12:37

[GoogleCodeExporter]

Is the partition FAT and the first partition marked "active"?

Original comment by litgh...@gmail.com on 15 Jun 2009 at 2:42

• Changed state: Accepted

[GoogleCodeExporter]

Partition is FAT 32.. it's a 16 gig USB memory stick.. 
How do you mark the first partition active?

Original comment by GodNn...@gmail.com on 15 Jun 2009 at 3:02

[GoogleCodeExporter]

Flash drives typically don't really have a partition table, so I take back the 
active
remark.  USB hard drives are the ones that sometimes need to have a partition 
marked
active.  Does your flash drive work with any other USB2-speed homebrew?

Original comment by litgh...@gmail.com on 15 Jun 2009 at 2:05

[GoogleCodeExporter]

<Sigh>, I just tried to get it to work with MplayerCE and it does not work..
Not sure of what else to try, or how to fix the problem..

Original comment by GodNn...@gmail.com on 16 Jun 2009 at 6:26