MathewWi / mplayer-ce

Automatically exported from code.google.com/p/mplayer-ce
0 stars 0 forks source link

mplayer starts to load the DVD than quits and does nothing #526

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1.nothing
2.
3.

What is the expected output?
for the player to play DVD
 What do you see instead?
Not playing the DVD

What version of the product are you using? On what operating system?
Mplayer CE Wii

Do you have a modchip?
No

Please provide any additional information below.

Original issue reported on code.google.com by chrsbl...@gmail.com on 27 Nov 2009 at 8:10

GoogleCodeExporter commented 9 years ago
How long did you wait? Took a long time for me (sometimes up to a minute) from
pressing play until something happened. 

Original comment by jrmon...@gmail.com on 30 Nov 2009 at 6:13

GoogleCodeExporter commented 9 years ago
mine doesnt work either. i was already running system menu 4.2u, and then 
installed HBC and DVDx using the 
HackMii installer .6, and then mPlayer CE .76 separately. It didn't play the 
DVD after mounting/opening the 
stream. Then I read around and people mentioned using cIOS.... had no luck 
installing the cIOS stuff. Just froze 
after choosing the IOS to install (no matter which one I chose). Kinda stuck.

Original comment by jmess...@gmail.com on 3 Dec 2009 at 1:33

GoogleCodeExporter commented 9 years ago
I do have a D2Pro modchip in there but I don't think it's doing anything... 
that thing never really did much at all 
to be honest. Flaky backup copy support is the only thing I ever got out of 
that waste of money. If I really need 
to, I will take it out but the special screwdriver I need to do that is in a 
box in storage and I'd like to avoid doing 
that trip if possible.

Original comment by jmess...@gmail.com on 3 Dec 2009 at 1:35

GoogleCodeExporter commented 9 years ago
I was having same problem, I reinstalled boot.elf to SD Card, went to homebrew,
loaded cIOS, it connected to net and downloaded patch, then I ran MPlayer CE, 
after
MPlayer loaded I went to menu and selected DVD mediaand it took a minute to 
load but
it plays movie fine.Hope this will help w your problem.

Original comment by camidan...@gmail.com on 3 Dec 2009 at 2:16

GoogleCodeExporter commented 9 years ago
I'm having very similar problems. Wii menu 4.2E, tried both CIOSes in the 
download
section, with and without DVDX and with and without the 'beta' version of 
mplayer_ce
(26.11.2009 and 30.11.2009). 

It is interesting to note that nothing worked at all with the standard CIOS 
installer
(Jun 30). By this I mean just stalling at the mplayer_ce 0.76 loading... screen 
and
needing a hard reboot. Again, interesting to note that with the 'beta' version 
of
mplayer_ce it got as far as "IOS 202 found, reloading IOS" before stalling (I 
think
this is line 976 of plat_gekko.c). 

With Hermes' version at least things started to move a bit. mplayer_CE loads 
and I
can get online stuff to play now quite happily, but DVDs remain a no-go. I 
select
"Play DVD" from the menu, it claims to be mounting the DVD and then that message
disappears and I am stuck waiting. No freezing now though, just no action - I 
can
easily keep using mplayer_ce after asking to play a DVD.

Really happy to help debug this if needed - any help I can lend. Keep up the 
good
work fellas (and ladies, if there are any) - one day Nintendo will embrace the
homebrew love you give their system...

Original comment by stefan.d...@gmail.com on 27 Dec 2009 at 11:25

GoogleCodeExporter commented 9 years ago
reinstall cios202 using this installer and comment results please

http://www.mediafire.com/?jmemyix4jqz

Original comment by rodries@gmail.com on 28 Dec 2009 at 1:02

GoogleCodeExporter commented 9 years ago
Hi rodries

No change from performance with Hermes' IOS 202 I'm afraid. Think I saw a bit 
more
debug code at the start of mplayer (?!) but can't be sure - too quick to flash 
up.
All other functions remain good, however - USB read, SD read, online play etc.

One slight difference, however, is that the blue LED behind the drive flashed 
up this
time - this didn't happen with the previous IOS 202. Both are spinning up the 
drive
when trying to mount, but it spins back down again straight away.

Just to check something (my IOS knowledge is very flaky) with the installer you 
gave
me, do I want to select IOS202 at the beginning menu or IOS 36 to bootstrap 
install
IOS202? I tried both, but I have always assumed that the target IOS (202) is
hard-coded into the installer, and all I am chosing is a Trucha bug enabled IOS 
so I
can run the installer from that?

Again, any more help I can give, let me know. Just so you know a bit about my 
Wii -
its a brand new black Wii purchased in Dec 2009 in the UK - dunno if the 
hardware
implications of this make any difference.

Original comment by stefan.d...@gmail.com on 28 Dec 2009 at 3:29

GoogleCodeExporter commented 9 years ago
maybe this might help a little.  If you are 4.2 i believe dvdx installs as a
different title id and not the one the current mplayer is looking for.  There's 
a
beta thats on topic in the irc that solved my problem 0.761 b1 19/12.  Hope 
this helps.

Original comment by usoz4l...@gmail.com on 30 Dec 2009 at 10:51

GoogleCodeExporter commented 9 years ago
Hi,
I have the exact same problem with mplayer_ce 0.75
I have a c2d modchip and system version is 3.2E
Tried IOS202 and IOS222, with /without DVDx with patchmii_core.
The play dvd just not working, I even can not list files from DVD though I can 
hear
the DVD driver was functioning with mount DVD.

Original comment by simonh...@gmail.com on 14 Mar 2010 at 11:59