Sofia-SIP shared libraries failed to install.

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Tried unsuccessfully to install Sofia-SIP libraries from both 
uni-ast-package-0.3.0.tar.gz and unimrcp-deps-1.0.1.tar.gz.
2. Sofia-SIP installation appears to complete properly, but the shared 
libraries are not installed anywhere.
3. UniMRCP build then fails with /usr/bin/ld: cannot find -lsofia-sip-ua

What version of the product are you using? On what operating system?
Downloaded uni-ast-package-0.3.0.tar.gz on Cent0S 5.4; also tried 
unimrcp-deps-1.0.1.tar.gz.

Please provide any additional information below.
I was able to sucessfully install Sofia-SIP by downloading 1.12.10 directly 
from SourceForge.

Original issue reported on code.google.com by dar...@gmail.com on 28 Jul 2010 at 8:19

[GoogleCodeExporter]

Make sure you have all the requirements in place including pkg-config.

http://code.google.com/p/unimrcp/wiki/InstallationGuide

Original comment by achalo...@gmail.com on 29 Jul 2010 at 10:12

• Added labels: Component-Build, OpSys-Linux

[GoogleCodeExporter]

I have the listed dependencies installed.

A co-worker who has been using UniMRCP for several years had the same issue 
when he tried to install the latest release.  He didn't notice at first because 
the UniMRCP build used the old Sofia-SIP libraries that he already had 
(although this may be as designed, since Sofia-SIP itself didn't have a new 
release).  He deleted the old libraries, but they were not re-installed during 
the build.

It's possible that the cause is out-of-date dependencies, since we use the same 
repository on a closed network; it may need updating.

We used the following versions:
autoconf 2.59-12
automake 1.9.6-2.1
libtool 1.5.22-7el5_4
gcc 4.1.2-46el5_4.2
pkgconfig 1:0.21-2.el5

Original comment by dar...@gmail.com on 30 Jul 2010 at 1:48

[GoogleCodeExporter]

You seem to have everything in place. Also, the versions should be fine, but 
still...

So, I started to suspect, but have just successfully installed Sofia-SIP from 
scratch on my CentOS 5.4

Several outputs would be required to identify the problem.

First, change dir into Sofia's source. Issue ./configure and collect the 
output. Next, issue make and make install. The output of make install would be 
useful as well.

Next, change dir into UniMRCP's source. Issue ./configure and collect the 
output.

Provide the mentioned outputs.

Original comment by achalo...@gmail.com on 2 Aug 2010 at 10:58

[GoogleCodeExporter]

Any updates?

Original comment by achalo...@gmail.com on 9 Aug 2010 at 7:11

[GoogleCodeExporter]

Sorry for the continuing delay but I was diverted to another project and, in 
the interim, someone has decided to update our repository.

I'll provide the requested output as soon I can, although (with apologies) I'll 
be on holidays until next week.

Original comment by dar...@gmail.com on 12 Aug 2010 at 1:29

[GoogleCodeExporter]

No problem, have a nice holiday :)

Original comment by achalo...@gmail.com on 12 Aug 2010 at 2:33

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Hello achaloyan and darouk
I have the exact same problem

these are my versions of required apps:
autoconf 2.59-12
autmake 1.9.6-2.3.el5
libtool 1.5.22-7.el5_4
gcc 4.1.2-48.el5
pkgconfig 0.21-2.el5

I followed the steps you told darouk to produce the output however it seems 
that when i run it the way you described there is a problem with APR, not sofia 
even though i had run uni-install.sh before and APR should be installed. 
Anyway, I attach these logs but i decided to also add log from console output 
produced by executing uni-install.sh as there is no 'APR not found' error (file 
named typescript).

Other files contain stdout from each operation. Here are some stderr messages 
that were printed on my console:

from make sofia:
libtool: link: warning: '-version-info/-version-number' is ignored for 
convenience libraries

from unimrcp configure:
configure: WARNING: APR not found
configure: error: no suitable APR found

I am running trixbox 2.8.0.4 with Asterisk 1.6 on VirtualBox. OS installed with 
trixbox is CentOS 5.5. I tried AsteriskNOW before (also CentOS 5.5) but the 
same problem occured.

Original comment by byk...@gmail.com on 20 Aug 2010 at 1:26

Attachments:

• sofia_configure_output
• sofia_make_install_output
• sofia_make_output
• unimrcp_configure_output
• typescript

[GoogleCodeExporter]

Hi byku88,

comparing the attached sofia_configure_output with mine, I have noticed a 
difference which may cause this behavior.

> checking for g++... no

< checking for g++... g++

So, please try to install g++ as well and start over with the installation. I 
guess everything should seamlessly run then.

Also, I'm attaching my configure output just in case.

Original comment by achalo...@gmail.com on 23 Aug 2010 at 12:42

Attachments:

• sofia_configure_output_ac

[GoogleCodeExporter]

Unfortunately it didn't help...
I also carefully analysed your log and installed f95 fortran compiler and 
doxygen which i didn't have as opposed to you. Now my config log looks almost 
the same but still the same problem occurs. I attach my current output. After 
comparing it in Notepad++ the only differences seem to be:
 - 'checking for pkg-config... /usr/bin/pkg-config' appearing in different lines in our logs
 - 'checking for glib-2.0...' appearing only in my log right after pkg-config. The weird thing is it does not return reply after '...' and there is no new line character either.

Maybe VM is causing these problems. I may try installing it on a seperate 
machine if i will be able to organise one unless you have some more suggestions.

Original comment by byk...@gmail.com on 23 Aug 2010 at 2:23

Attachments:

• sofia_configure_output_2

[GoogleCodeExporter]

That's really bad as I don't know what to try next.

Of course, I'm not on VM, but I don't think VM may cause such an issue.

Anyway, a few questions for now.

1. What would be the output of the following
# whereis libsofia-sip-ua

in my case, it's
libsofia-sip-ua: /usr/local/lib/libsofia-sip-ua.a 
/usr/local/lib/libsofia-sip-ua.so /usr/local/lib/libsofia-sip-ua.la

2. Assuming that sofia-sip is installed to /usr/local/lib, what would be the 
output of
# pkg-config --libs /usr/local/lib/pkgconfig/sofia-sip-ua.pc

In my case, it's 
-L/usr/local/lib -lsofia-sip-ua

Original comment by achalo...@gmail.com on 25 Aug 2010 at 6:50

[GoogleCodeExporter]

whereis returns just "libsofia-sip-ua:"

Original comment by byk...@gmail.com on 26 Aug 2010 at 6:29

[GoogleCodeExporter]

And this means you have no sofia-sip library installed.

Now looking back at the output of make install, I notice that header files as 
well as pkg-config related stuff are properly installed, but not the library 
itself. So, the issue indeed exists. Please edit the mentioned below part in 
the corresponding makefile located in sofia-sip/libsofia-sip-ua/Makefile.am

Instead of 
< noinst_LTLIBRARIES = libsofia-sip-ua.la

use
> lib_LTLIBRARIES = libsofia-sip-ua.la

You may need to re-install the package after that. Later, I'll release a 
new/updated package with that fix.

Original comment by achalo...@gmail.com on 26 Aug 2010 at 10:48

• Changed state: Accepted
• Added labels: Type-Defect, Priority-Medium

[GoogleCodeExporter]

The edit to sofia-sip/libsofia-sip-ua/Makefile.am made no difference for me; 
the sofia-sip libraries still do not install.

Admittedly, this was not a clean install and my machine may be a little messed 
up given all the things I've tried, so you might want to wait to hear what 
byku88 has to say. 

Original comment by dar...@gmail.com on 27 Aug 2010 at 5:02

[GoogleCodeExporter]

Worked for me so give it a try. :)

But now I have some problems with the Asterisk connector. Make returns lots of 
errors begining with missing asterisk.h file. I want to remind that I'm using 
trixbox, 'whereis asterisk' returns: 'asterisk: 
/usr/src/tbm-pbxconfig-5.5.1/asterisk.conf /usr/src/tbm-pbxconfig/asterisk.conf 
/bin/asterisk.reload /usr/sbin/asterisk /etc/asterisk /usr/lib/asterisk 
/usr/share/man/man8/asterisk.8.gz'. Should I open a new thread for that?

Original comment by byk...@gmail.com on 30 Aug 2010 at 6:57

[GoogleCodeExporter]

Darouk,

If you don't want to reinstall the whole package, 'make distclean' might be 
required for both sofia-sip and unimrcp itself.

Original comment by achalo...@gmail.com on 1 Sep 2010 at 9:46

[GoogleCodeExporter]

Byku88,

Glad it worked. 

As of the other issue, it seems trixbox doesn't install the required Asterisk's 
header files.
You are missing the following
/usr/include/asterisk /usr/include/asterisk.h

BTW, you may manually copy the corresponding headers, if needed. Alternatively, 
try to install Asterisk bundled with the package.

Original comment by achalo...@gmail.com on 1 Sep 2010 at 9:51

[GoogleCodeExporter]

Success!

Thank you very much for your assistance.

Original comment by dar...@gmail.com on 2 Sep 2010 at 4:29

[GoogleCodeExporter]

Finally, the fixed version is available for download.

Thanks for raising this up.

Original comment by achalo...@gmail.com on 24 Sep 2010 at 11:48

• Changed state: Fixed

[GoogleCodeExporter]

I tried uni-ast-package-0.3.1.tar.gz on my FreePBX 2.8.3 today and got the same 
problem.

sofia-sip/libsofia-sip-ua/Makefile.am already update to the new version.

Anyone has the solution?

Original comment by firexx...@gmail.com on 5 Jan 2011 at 3:37

[GoogleCodeExporter]

Installing uni-ast-package-0.3.1.tar.gz on a clean centos 5.5 (32bit) fails 
with the same issue. Sofia-sip is not installing the libriries. I can find:

libsofia-sip-ua.a, libsofia-sip-ua.la but not libsofia-sip-ua.so

attached output from building uni-install.sh

Original comment by pnlars...@gmail.com on 6 Jan 2011 at 10:11

Attachments:

• uni-install_output.txt