search

MatterVN / ModbusTCP2MQTT

Sungrow & SMA Solar Inverter addon for Home Assistant using mobusTCP
MIT License
68 stars 51 forks source link

MQTT: Server not configured #69

Open Maartenf2 opened 10 months ago

Maartenf2 commented 10 months ago

I have this issue where no data is sent to MQTT:

My broker is well configured, as I use it for Zigbee2MQTT also.

Any extra config step needed?

2023-12-07 11:33:13 DEBUG Starting new HTTP connection (1): 192.168.1.63:80 2023-12-07 11:33:14 DEBUG http://192.168.1.63:80 "GET /device/getParam?dev_id=1&dev_type=35&dev_code=3351&type=3&param_addr=5035&param_num=10&param_type=1&token=419e2a77-b8c0-458f-b3f5-8615fbdf0d27&lang=en_us&time123456=1701945193 HTTP/1.1" 200 149 2023-12-07 11:33:14 DEBUG HTTP Status code 200 2023-12-07 11:33:14 DEBUG Payload Status code 1 2023-12-07 11:33:14 DEBUG Payload Dict: {'result_code': 1, 'result_msg': 'success', 'result_data': {'param_value': 'FF FF 00 55 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF '}} 2023-12-07 11:33:14 DEBUG Data length: 20 2023-12-07 11:33:14 DEBUG Changing transaction state from 'SENDING' to 'WAITING FOR REPLY' 2023-12-07 11:33:14 DEBUG Modbus payload: ['00', '5b', '00', '00', '00', '17', '01', '03', '14', 'FF', 'FF', '00', '55', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF'] 2023-12-07 11:33:14 DEBUG Requested Size: 8, Returned Size: 8 2023-12-07 11:33:14 DEBUG Modbus payload: ['14', 'FF', 'FF', '00', '55', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF', 'FF'] 2023-12-07 11:33:14 DEBUG Requested Size: 21, Returned Size: 21 2023-12-07 11:33:14 DEBUG Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY' 2023-12-07 11:33:14 DEBUG RECV: 0x0 0x5b 0x0 0x0 0x0 0x17 0x1 0x3 0x14 0xff 0xff 0x0 0x55 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 2023-12-07 11:33:14 DEBUG Processing: 0x0 0x5b 0x0 0x0 0x0 0x17 0x1 0x3 0x14 0xff 0xff 0x0 0x55 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 2023-12-07 11:33:14 DEBUG Factory Response[ReadHoldingRegistersResponse: 3] 2023-12-07 11:33:14 DEBUG Adding transaction 91 2023-12-07 11:33:14 DEBUG Getting transaction 91 2023-12-07 11:33:14 DEBUG Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE' 2023-12-07 11:33:14 DEBUG Using Inverter Time: 2023-12-7 11:33:12 2023-12-07 11:33:14 INFO Inverter: Successfully scraped in 2.486299 secs 2023-12-07 11:33:14 WARNING MQTT: Server Error; Server not configured MQTT: Server Error; Server not configured

cartman10 commented 7 months ago

Hi, I'm having the same issue. Any update here ?

BM118 commented 4 months ago

I am also having the same issue.

new install of the latest HA full OS, installed the MQTT from the addons, setup the MQTT integration, setup another addon that uses this setup (core-mosquitto) and it works fine, but this addon keeps throwing this error. When I look at the logs in MQTT it shows it is connecting, but it doesn’t seem to be working properly.

Any ideas?

[18:13:18] INFO: Configured'core-mosquitto' mqtt broker. [18:13:18] INFO: Generated config file. 2024-05-15 18:13:19 INFO Starting SunGather 0.3.8 2024-05-15 18:13:19 INFO Loaded config: config.sg 2024-05-15 18:13:19 INFO Loaded registers: //registers-sungrow.yaml 2024-05-15 18:13:19 INFO Registers file version: 0.2.0 2024-05-15 18:13:19 INFO Logging to console set to: DEBUG 2024-05-15 18:13:19 DEBUG Inverter Config Loaded: {'host': '10.0.0.22', 'port': 502, 'timeout': 15, 'retries': 3, 'slave': 1, 'scan_interval': 60, 'connection': 'sungrow', 'model': None, 'smart_meter': False, 'use_local_time': False, 'log_console': 'DEBUG', 'log_file': 'OFF', 'level': 1} 2024-05-15 18:13:19 DEBUG Checking Modbus Connection 2024-05-15 18:13:19 INFO Modbus client is not connected, attempting to reconnect 2024-05-15 18:13:19 INFO Connection: ModbusTcpClient(10.0.0.22:502) 2024-05-15 18:13:19 DEBUG Connection to Modbus server established. Socket ('172.30.33.3', 33549) 2024-05-15 18:13:34 DEBUG Connection to Modbus server established. Socket ('172.30.33.3', 42825) 2024-05-15 18:13:37 DEBUG load_registers: read, 4999:1 2024-05-15 18:13:37 DEBUG Connection to Modbus server established. Socket ('172.30.33.3', 51949) 2024-05-15 18:13:37 DEBUG Connection to Modbus server established. Socket ('172.30.33.3', 46193) 2024-05-15 18:13:37 DEBUG Current transaction state - IDLE 2024-05-15 18:13:37 DEBUG Running transaction 1 2024-05-15 18:13:37 DEBUG Connection to Modbus server established. Socket ('172.30.33.3', 46019) 2024-05-15 18:13:37 DEBUG Connection to Modbus server established. Socket ('172.30.33.3', 49755) 2024-05-15 18:13:37 DEBUG SEND: 0x0 0x1 0x0 0x0 0x0 0x6 0x1 0x4 0x13 0x87 0x0 0x1 2024-05-15 18:13:37 DEBUG New Transaction state 'SENDING' 2024-05-15 18:13:37 DEBUG Changing transaction state from 'SENDING' to 'WAITING FOR REPLY' 2024-05-15 18:13:37 DEBUG Changing transaction state from 'WAITING FOR REPLY' to 'PROCESSING REPLY' 2024-05-15 18:13:37 DEBUG RECV: 0x0 0x1 0x0 0x0 0x0 0x5 0x1 0x4 0x2 0x24 0x82 2024-05-15 18:13:37 DEBUG Processing: 0x0 0x1 0x0 0x0 0x0 0x5 0x1 0x4 0x2 0x24 0x82 2024-05-15 18:13:37 DEBUG Factory Response[ReadInputRegistersResponse: 4] 2024-05-15 18:13:37 DEBUG Adding transaction 1 2024-05-15 18:13:37 DEBUG Getting transaction 1 2024-05-15 18:13:37 DEBUG Changing transaction state from 'PROCESSING REPLY' to 'TRANSACTION_COMPLETE' 2024-05-15 18:13:37 WARNING Unknown Type Code Detected: 9346 Unknown Type Code Detected: 9346 2024-05-15 18:13:37 INFO Closing Session: ModbusTcpClient(10.0.0.22:502) 2024-05-15 18:13:37 INFO Loading Export: exports\mqtt 2024-05-15 18:13:37 ERROR Failed loading export: 'NoneType' object has no attribute 'replace' Please make sure mqtt.py exists in the exports folder Failed loading export: 'NoneType' object has no attribute 'replace' Please make sure mqtt.py exists in the exports folder 2024-05-15 18:13:37 DEBUG Checking Modbus Connection

BM118 commented 4 months ago

Managed to get it working, but it doesn’t seem to do what i expected it to do. I expected it to discover the model of my inverter, but if you let it do this, it seems to not discover the model and throws this error. If you specify the model number exactly, it started fine and no errors about the MQTT server. It appears the model and subsequently the serial number must be discovered before it can publish to MQTT which causes this error.