Open bsweeti opened 8 years ago
A quick double check on your setup. Do you have an Ethernet cable plugged from your router to your RPi? If so, double check that you only have one WiFi adapter connected to your RPi as well. In case you have had more than one WiFi adapter connected to your RPi at any given time, could you access the PiPass dashboard and click 'Raspberry Pi' -> 'Reset Network'.
Hopefully this will fix your issue. If not, could you paste in the output of 'ifconfig' here so that I can take a look?
Thanks.
Yes the ethernet is directly connected from the router and only the one wifi adapter. This is also a fresh install as well.
Once Pipass is installed (automatically), the RPi network is down and I can no long SSH in... so here's a pic of the ifconfig:
Thanks for the help.
Just did a fresh install, here is my current /etc/network/interfaces:
auto lo iface lo inet loopback
auto eth0 allow-hotplug eth0 iface eth0 inet manual
auto wlan0 allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
auto wlan1 allow-hotplug wlan1 iface wlan1 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
There is a wlan1 listed... not sure why... Here is iwconfig:
wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off
lo no wireless extensions.
eth0 no wireless extensions.
Let me know if you need any more info.
And here is lsusb:
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 0e8f:0022 GreenAsia Inc. Bus 001 Device 005: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Hi there. Using a raspberry pi (1) model B with TP-LINK TL-WN7200ND, after both automatic and manual installs, dhcpcd fails to start on reboot "because /etc/network/interfaces... Failed!"
I'm definitely not an experienced linux user, any help would be greatly appreciated.