Open SeamasSun opened 4 years ago
Is your device connected in DFU mode?
Is your device connected in DFU mode?
Yes, sure.
Are you sure because if igetnonce can't see the device then you most likely either aren't in DFU mode, are using a bad cable or just aren't plugged in. Also you don't need to run Vieux as root/with sudo
Are you sure because if igetnonce can't see the device then you most likely either aren't in DFU mode, are using a bad cable or just aren't plugged in. Also you don't need to run Vieux as root/with sudo
In order to check whether it is a cable or other software environment problem, I tried to use another Iphone 5s, igetnonce can successfully detect the device, as shown in Figure 1, under all circumstances unchanged, while replaced with Ipad Air, igetnonce cannot detect it, as shown in Figure 2. thx.
This looks like an issue with your iPad, either its not in DFU mode properly or it has some hardware fault. Nothing I can do sorry
@MatthewPierson Anyway, thanks a lot.
Did you try with official cable?
Seems I encounter the same problem, model A1474
Dear, I start the Script as mac(root), there is an Error below.
run './vieux -i 1.ipsw'
Logs:then run
$ ./igetnonce
thx.