medivb
commented
4 months ago These are some logs that are hopefully relevant:
System: Home Assistant OS 12.2 (amd64 / generic-x86-64) Home Assistant Core: 2024.5.2 s6-rc: info: service conf-adsbexchange successfully started s6-rc: info: service adsbexchange-feed: starting s6-rc: info: service adsbexchange-feed successfully started s6-rc: info: service adsbexchange-stats: starting s6-rc: info: service adsbexchange-mlat: starting s6-rc: info: service adsbexchange-hassio-sensors: starting s6-rc: info: service adsbexchange-mlat successfully started s6-rc: info: service adsbexchange-hassio-sensors successfully started s6-rc: info: service adsbexchange-stats successfully started [fr24feed] 2024-05-07 16:11:48 | [feed][i]configuring decoder [fr24feed] 2024-05-07 16:11:48 | [feed][c]Max range AIR: 350.0nm [fr24feed] 2024-05-07 16:11:48 | [feed][c]Max range GND: 80.0nm [fr24feed] 2024-05-07 16:11:48 | [feed][i]configuration changed [fr24feed] 2024-05-07 16:11:48 | [feed][i]defined 3 servers [fr24feed] 2024-05-07 16:11:48 | [feed][c]Timestamps: optional [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.318 [E][:] Local time: 2024-05-07 16:11:48 +0200 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.319 [E][:] GMT+0 time: 2024-05-07 15:11:48 +0200 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.319 [E][:] Your machine should be set as GMT+0 time zone! [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.319 [W][:] Time zone is not set to GMT+0 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.319 [I][receiver_ac_sender.cpp:137] Stopping ReceiverACSender threads for feed [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.319 [D][receiver_ac_sender.cpp:141] Stop called on non-running network thread for feed [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.319 [I][receiver_ac_sender.cpp:96] Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.24:8099, feed: EHAM617, send_interval: 5s/1s, max age: 15s, send metadata: true, mode: 1, filtering: true [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [E][:] Local time: 2024-05-07 16:11:48 +0200 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [E][:] GMT+0 time: 2024-05-07 15:11:48 +0200 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [E][:] Your machine should be set as GMT+0 time zone! [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [W][:] Time zone is not set to GMT+0 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [I][crxstats.cpp:588] [stats]Stats thread started [fr24feed] 2024-05-07 16:11:48 | [feed][n]EHAM617@185.218.24.22:8099/UDP [fr24feed] 2024-05-07 16:11:48 | [feed][n]connecting [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [E][:] Local time: 2024-05-07 16:11:48 +0200 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [E][:] GMT+0 time: 2024-05-07 15:11:48 +0200 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [E][:] Your machine should be set as GMT+0 time zone! [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [W][:] Time zone is not set to GMT+0 [fr24feed] 2024-05-07 16:11:48 | 24-05-07 16:11:48.320 [I][receiver_ac_sender.cpp:36] Network thread connecting to 185.218.24.22:8099 for feed EHAM617 [fr24feed] 2024-05-07 16:11:48 | [feed][n]connected via UDP (fd 23) [fr24feed] 2024-05-07 16:11:48 | [feed][n]working Home Assistant Supervisor: 2024.04.4
And this is my config:
SERVICE_ENABLE_DUMP1090: true SERVICE_ENABLE_PIAWARE: true SERVICE_ENABLE_FR24FEED: true SERVICE_ENABLE_HTTP: true PIAWARE_FEEDER_DASH_ID: {redacted} FR24FEED_FR24KEY: {redacted} ADSBEXCHANGE_UUID: {redacted} PLANEFINDER_SHARECODE: "123" HTML_SITE_LAT: "{redacted}" HTML_SITE_LON: "{redacted}" HTML_SITE_ALT: "7" SYSTEM_HTTP_ULIMIT_N: 1048576 SYSTEM_FR24FEED_ULIMIT_N: 1024 SERVICE_ENABLE_IMPORT_OVER_NETCAT: false DUMP1090_REMOTE_HOST: {redacted} DUMP1090_REMOTE_PORT: 30005 DUMP1090_ADDITIONAL_ARGS: >- --net-only --mlat --forward-mlat --net-bi-port 30004,30104 --net-bo-port 30005 --json-location-accuracy 2 --net-heartbeat 30 --fix --fix DUMP1090_LOCAL_PORT: 30004 SERVICE_ENABLE_PLANEFINDER: false SERVICE_ENABLE_ADSBEXCHANGE: true ADSBEXCHANGE_MLAT: false ADSBEXCHANGE_STATION_NAME: {redacted} MLAT_EXACT_LAT: "{redacted}" MLAT_EXACT_LON: "{redacted}" MLAT_ALTITUDE_MSL_METERS: "7"
MaxWinterstein
I love the ADS-B Multi-Portal Feeder Add-on!
However, now I seem to be running into an issue:
Until I updated to Hass Core 2024.5.1 (learned to skip the .0), I was able to take my dump1090 feed from my external PI that is located with the antenna and distribute further to the various platforms using the add-on. This just stopped working. Is anyone else experiencing this as well? Any suggestions on how to get this working again? Updating Core to 2024.5.2 did not solve it.