Closed patzinak closed 8 years ago
The same bug appears on the Flow Meter graph. Label "Flow Rate (gal/min)" is required.
The same bug is on the Vacuum plot. Either label "Pressure (bar)" or "Pressure (mbar)" is required. The later one is preferred but the first one is okay too.
Also, there might be or might not be a problem with the units on the Vacuum plot. Please, double check the values on the plot.
I will take a look at this, I probably forgot to tell mView what the y axis should be.
Fixed, i think
The axis should be labeled as "Temperature (K)".