search

MediaTek-Labs / linkit-smart-7688-feed

189 stars 152 forks source link

opkg update fails #12

Closed versamodule closed 8 years ago

versamodule commented 8 years ago

opkg update fails. For instance, this is the first line after opkg update. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

blogic commented 8 years ago

On 17/02/2016 15:31, Jim wrote:

opkg update fails. For instance, this is the first line after opkg update. Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12.

mt7688 was never part of the CC release.

versamodule commented 8 years ago

But opkg update, used to work just fine several days ago. Now it does not, and its because that folder is gone.

On 2/17/2016 8:36 AM, John Crispin wrote:

On 17/02/2016 15:31, Jim wrote:

opkg update fails. For instance, this is the first line after opkg update. Downloading

http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12.

mt7688 was never part of the CC release.

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185231114.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

blogic commented 8 years ago

no that folder was never there i upload the folders and mt7688 was never part of the CC release

you were previously using the feed located on mirror2. however the mtk-linkit package has changed so that it will work with CC.1

throw these lines into /etc/opk/distfeeds.conf replacing the current content

src/gz chaos_calmer_base http://mirror2.openwrt.org/mt7688_v0.9/base src/gz chaos_calmer_luci http://mirror2.openwrt.org/mt7688_v0.9/luci src/gz chaos_calmer_packages http://mirror2.openwrt.org/mt7688_v0.9/packages

--> https://github.com/MediaTek-Labs/linkit-smart-7688-feed/commit/4c609f606a8637006e6f6137e91b89beed823c84

On 17/02/2016 15:40, Jim wrote:

But opkg update, used to work just fine several days ago. Now it does not, and its because that folder is gone.

On 2/17/2016 8:36 AM, John Crispin wrote:

On 17/02/2016 15:31, Jim wrote:

opkg update fails. For instance, this is the first line after opkg update. Downloading

http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12.

mt7688 was never part of the CC release.

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185231114.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185233093.

versamodule commented 8 years ago

Thank you I will try that. What is not clear to me is anyone downloading firmware (v0.9.2) will have this same issue. If things have changed, why is there not a new firmware rev ?

On 2/17/2016 8:45 AM, John Crispin wrote:

no that folder was never there i upload the folders and mt7688 was never part of the CC release

you were previously using the feed located on mirror2. however the mtk-linkit package has changed so that it will work with CC.1

throw these lines into /etc/opk/distfeeds.conf replacing the current content

src/gz chaos_calmer_base http://mirror2.openwrt.org/mt7688_v0.9/base src/gz chaos_calmer_luci http://mirror2.openwrt.org/mt7688_v0.9/luci src/gz chaos_calmer_packages http://mirror2.openwrt.org/mt7688_v0.9/packages

--> https://github.com/MediaTek-Labs/linkit-smart-7688-feed/commit/4c609f606a8637006e6f6137e91b89beed823c84

On 17/02/2016 15:40, Jim wrote:

But opkg update, used to work just fine several days ago. Now it does not, and its because that folder is gone.

On 2/17/2016 8:36 AM, John Crispin wrote:

On 17/02/2016 15:31, Jim wrote:

opkg update fails. For instance, this is the first line after opkg update. Downloading

http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12.

mt7688 was never part of the CC release.

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185231114.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185233093.

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185235194.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

blogic commented 8 years ago

v0.9.2 points at the folders on mirror2 and works fine.

the reason why 0.9.3 and CC.1 are not public available yet is because they were not released yet.

the issue you are having is because you built your own image from source. the binary feed cannot work with your image as they are based on different git revisions.

the biggest issues will be seen by the kernel as the vermagic of the binary will be different from your self compiled image compared to the kmods on mirror2.

On 17/02/2016 15:51, Jim wrote:

Thank you I will try that. What is not clear to me is anyone downloading firmware (v0.9.2) will have this same issue. If things have changed, why is there not a new firmware rev ?

On 2/17/2016 8:45 AM, John Crispin wrote:

no that folder was never there i upload the folders and mt7688 was never part of the CC release

you were previously using the feed located on mirror2. however the mtk-linkit package has changed so that it will work with CC.1

throw these lines into /etc/opk/distfeeds.conf replacing the current content

src/gz chaos_calmer_base http://mirror2.openwrt.org/mt7688_v0.9/base src/gz chaos_calmer_luci http://mirror2.openwrt.org/mt7688_v0.9/luci src/gz chaos_calmer_packages http://mirror2.openwrt.org/mt7688_v0.9/packages

-->

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/commit/4c609f606a8637006e6f6137e91b89beed823c84

On 17/02/2016 15:40, Jim wrote:

But opkg update, used to work just fine several days ago. Now it does not, and its because that folder is gone.

On 2/17/2016 8:36 AM, John Crispin wrote:

On 17/02/2016 15:31, Jim wrote:

opkg update fails. For instance, this is the first line after opkg update. Downloading

http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12.

mt7688 was never part of the CC release.

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185231114.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185233093.

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185235194.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185237291.

versamodule commented 8 years ago

Ah... Thanks for the explanation.

On 2/17/2016 9:01 AM, John Crispin wrote:

v0.9.2 points at the folders on mirror2 and works fine.

the reason why 0.9.3 and CC.1 are not public available yet is because they were not released yet.

the issue you are having is because you built your own image from source. the binary feed cannot work with your image as they are based on different git revisions.

the biggest issues will be seen by the kernel as the vermagic of the binary will be different from your self compiled image compared to the kmods on mirror2.

On 17/02/2016 15:51, Jim wrote:

Thank you I will try that. What is not clear to me is anyone downloading firmware (v0.9.2) will have this same issue. If things have changed, why is there not a new firmware rev ?

On 2/17/2016 8:45 AM, John Crispin wrote:

no that folder was never there i upload the folders and mt7688 was never part of the CC release

you were previously using the feed located on mirror2. however the mtk-linkit package has changed so that it will work with CC.1

throw these lines into /etc/opk/distfeeds.conf replacing the current content

src/gz chaos_calmer_base http://mirror2.openwrt.org/mt7688_v0.9/base src/gz chaos_calmer_luci http://mirror2.openwrt.org/mt7688_v0.9/luci src/gz chaos_calmer_packages http://mirror2.openwrt.org/mt7688_v0.9/packages

-->

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/commit/4c609f606a8637006e6f6137e91b89beed823c84

On 17/02/2016 15:40, Jim wrote:

But opkg update, used to work just fine several days ago. Now it does not, and its because that folder is gone.

On 2/17/2016 8:36 AM, John Crispin wrote:

On 17/02/2016 15:31, Jim wrote:

opkg update fails. For instance, this is the first line after opkg update. Downloading

http://downloads.openwrt.org/chaos_calmer/15.05/ra...7688/packages/base/Packages.gz

Looking into that folder structure, there is no folder /mt7688 in ramips. Is gone !

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12.

mt7688 was never part of the CC release.

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185231114.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185233093.

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185235194.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

— Reply to this email directly or view it on GitHub

https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185237291.

— Reply to this email directly or view it on GitHub https://github.com/MediaTek-Labs/linkit-smart-7688-feed/issues/12#issuecomment-185242264.

Sincerely,

Jimp@Versamodule.com

This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

DumiduNadeera commented 8 years ago

Hi , I'm having the same issue. opkg update failed. these are the 1st few line that i'm getting

Downloading http://mirror2.openwrt.org/mt7688_v0.9/base/Packages.gz. wget: bad address 'mirror2.openwrt.org' Downloading http://mirror2.openwrt.org/mt7688_v0.9/base/Packages.sig. wget: bad address 'mirror2.openwrt.org' Signature check failed. Remove wrong Signature file.