Invalid command with elian using iwpriv

[gghyoo]

I want to use elian in openwrt. but the wifi driver do not support.

I use following cmds:

root@mylinkit:~# iwpriv ra0 elian start
Invalid command : elian

root@mylinkit:~# iwpriv ra0 
ra0       Available private ioctls :
          set              (8BE2) : set 1536 char  & get   0      
          show             (8BF1) : set 1024 char  & get   0      
          get_site_survey  (8BED) : set   0       & get 1024 char 
          set_wsc_oob      (8BF9) : set 1024 char  & get 1024 char 
          get_mac_table    (8BEF) : set 1024 char  & get 1024 char 
          e2p              (8BE7) : set 1024 char  & get 1024 char 
          bbp              (8BE3) : set 1024 char  & get 1024 char 
          mac              (8BE5) : set 1024 char  & get 1024 char 
          rf               (8BF3) : set 1024 char  & get 1024 char 
          get_wsc_profile  (8BF2) : set 1024 char  & get 1024 char 
          get_ba_table     (8BF6) : set 1024 char  & get 1024 char 
          stat             (8BE9) : set 1024 char  & get 1024 char 

[Pillar1989]

For elian https://github.com/NuxNuxLi/linkit-smart-EK-7688AMx-feed/tree/master/mtk-sdk-wifi/wifi_binary

[gghyoo]

@Pillar1989 非常感谢你的工作。但是不知道你是怎么编译得到这个带elian的ko文件的。

[shihhsuan]

The Wi-Fi driver in LinkIt Smart 7688 didn't support elian.