Open RobotBob opened 9 years ago
Does it just hang or does it throws an error. Can you provide me with the error.txt from the application directory?
It just hangs until I lose hope and close the window... Appreciate any tips, rather new to this;
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.04s
avrdude.exe: Device signature = 0x1e9801 avrdude.exe: reading input file "C:/Users/*****/Desktop/Megapirate/Flashtool/firmwares/9184da4f633b6223b81b86dd8bf585bf_c469f7b9b3d9bc22a4fd57f50526d24d505e2124.hex" avrdude.exe: writing flash (207256 bytes):
Writing | ####avrdude.exe: stk500v2_ReceiveMessage(): timeout
Same issue. Tricopter stops at 8% flashotool 1.1.r2
Reading | ################################################## | 100% 0.05s
avrdude.exe: Device signature = 0x1e9801 avrdude.exe: reading input file "C:/Documents and Settings/al/Mis documentos/PROYECTOS/TRICOPTER/flashtool/firmwares/c556635f6d246fddb018074781707fea_c469f7b9b3d9bc22a4fd57f50526d24d505e2124.hex" avrdude.exe: writing flash (207762 bytes):
Writing | ####avrdude.exe: stk500v2_ReceiveMessage(): timeout avrdude.exe: stk500v2_ReceiveMessage(): timeout avrdude.exe: stk500v2_ReceiveMessage(): timeout
avrdude.exe: stk500v2_ReceiveMessage(): timeout avrdude.exe: stk500v2_ReceiveMessage(): timeout
Someone has solved this issue?
the error looks like a bootloader error. you could try clearing the flash using arduino ide and trying to reflash.
I am having the same issue with firmware stuck at 8%. I don't think it's the boot loader issue as I can install the quad and hex firmware with out any problems. I believe the tri firmware v3.1.5r2 is corrupted.
Would like to hear from smurfy or the developer for further insight of the issue.
Thanks, T
Good day,
I have had no problem uploading a Quad hex to an AIOP card, but as soon as I do the same for a Tricopter model - the flashing process stops at 8% every time... Any leads?
Cheers