Closed Spanker-General closed 1 year ago
Second attempt this morning
Connecting... Loading LPC config from 0:/sys/board.txt... Checking drivers... Driver 0 ready Driver 1 ready Driver 2 ready Driver 3 ready RepRapFirmware for LPC176x based Boards version 3.2-beta2_5 Executing config.g... ok HTTP is enabled on port 80 FTP is disabled TELNET is disabled Done! Executing runonce.g... Turn off the current WiFi mode before selecting a new one [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Aborting connection attempt after 4 failed writes. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?)
Please burn this program
Have burnt it but still getting this error
Connecting... ok T0:-273.1 /0.0 B:-273.1 /0.0 Printer is now online. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error
Have you tried other computers?
Or other usb port
Have tried both boards on my spare lap top both having the same issues of connecting disconnecting on windows and linux I have checked wiring and wires and connectors check out in the correct positions too. Not sure what else to try next
Edit windows pronterface kept sending M105 with no response checked thermistors and they are located correctly
Delete the M552 S1 content in config.g
Send your config content
Are you asking for a copy of the config.g file?
; Configuration file for Fly-CDY (firmware version 3) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v3.1.10-LPC on Wed Dec 16 2020 09:04:14 GMT+0000 (Greenwich Mean Time)
; General preferences G90 ; send absolute coordinates... M83 ; ...but relative extruder moves M550 P"Aaron's Anet A8" ; set printer name
; Network ; enable network M586 P0 S1 ; enable HTTP M586 P1 S0 ; disable FTP M586 P2 S0 ; disable Telnet
; Drives M569 P0 S1 ; physical drive 0 goes forwards using default driver timings M569 P1 S0 ; physical drive 1 goes backwards using default driver timings M569 P2 S1 ; physical drive 2 goes forwards using default driver timings M569 P3 S1 ; physical drive 3 goes forwards using default driver timings M584 X0 Y1 Z2 E3 ; set drive mapping M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation M92 X80.00 Y80.00 Z400.00 E420.00 ; set steps per mm M566 X900.00 Y900.00 Z12.00 E120.00 ; set maximum instantaneous speed changes (mm/min) M203 X6000.00 Y6000.00 Z180.00 E1200.00 ; set maximum speeds (mm/min) M201 X500.00 Y500.00 Z20.00 E250.00 ; set accelerations (mm/s^2) M906 X800 Y800 Z800 E800 I30 ; set motor currents (mA) and motor idle factor in per cent M84 S30 ; Set idle timeout
; Axis Limits M208 X0 Y0 Z0 S1 ; set axis minima M208 X300 Y300 Z350 S0 ; set axis maxima
; Endstops M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
; Z-Probe M558 P0 H5 F120 T6000 ; disable Z probe but set dive height, probe speed and travel speed M557 X15:215 Y15:195 S20 ; define mesh grid
; Heaters M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp M950 H0 C"bed" T0 ; create bed heater output on bed and map it to sensor 0 M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit M140 H0 ; map heated bed to heater 0 M143 H0 S120 ; set temperature limit for heater 0 to 120C M143 H0 S120 ; set temperature limit for heater 0 to 120C M308 S1 P"e0temp" Y"thermistor" T100000 B4138 ; configure sensor 1 as thermistor on pin e0temp M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1 M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit M143 H1 S280 ; set temperature limit for heater 1 to 280C
; Fans M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
; Tools M563 P0 D0 H1 F0 ; define tool 0 G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
; Custom settings are not defined
Have deleted the line M552 as requested, the boards still threw up the error previously mentioned.
Update, got the boards stable but having trouble burning wifi bin file
Put this file into the sys folder
I am still not able to do this setup, I have read something on gloomyandy post apparently I need to connect an esp tool and use that to burn the firmware to it, is that corrrect?
No need, decompress the file I sent to you, put the .bin file into the sd card, and use M997 S1 to command the motherboard to automatically burn the wifi program
I have done that, it brings up an error can't write and disconnects the board
Take a picture of your motherboard
Not able to upload an image
Drag the picture to the input window
Trying now, have had to use my main pc as mobile will not let me drag and drop into github,
/home/Aaron/Downloads/IMG_20201218_075724_5.jpg
I am hoping this is clear enough and works
Use this, you can contact in real time
Installed a board with software but am no longer able to connect via Linux os through usb via Pronterface. Any help or advice deeply appreciated
Connecting... [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Aborting connection attempt after 4 failed writes. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) Connecting... [ERROR] Could not connect to /dev/ttyACM0 at baudrate 250000: Serial error: [Errno 2] could not open port /dev/ttyACM0: [Errno 2] No such file or directory: '/dev/ttyACM0' Connecting... [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Aborting connection attempt after 4 failed writes. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) Connecting... [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Aborting connection attempt after 4 failed writes. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) Connecting... Loading LPC config from 0:/sys/board.txt... Checking drivers... Driver 0 ready Driver 1 ready Driver 2 ready Driver 3 ready RepRapFirmware for LPC176x based Boards version 3.2-beta2_5 Executing config.g... ok HTTP is enabled on port 80 FTP is disabled TELNET is disabled Done! Executing runonce.g... Turn off the current WiFi mode before selecting a new one [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Aborting connection attempt after 4 failed writes. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) Connecting... [ERROR] Could not connect to /dev/ttyACM1 at baudrate 250000: Serial error: [Errno 2] could not open port /dev/ttyACM1: [Errno 2] No such file or directory: '/dev/ttyACM1' Reset. Connecting... [ERROR] Could not connect to /dev/ttyACM1 at baudrate 250000: Serial error: [Errno 2] could not open port /dev/ttyACM1: [Errno 2] No such file or directory: '/dev/ttyACM1' Connecting... [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?) [ERROR] Can't write to printer (disconnected?) (SerialException): write failed: [Errno 5] Input/output error [ERROR] Aborting connection attempt after 4 failed writes. [ERROR] Can't read from printer (disconnected?) (SerialException): device reports readiness to read but returned no data (device disconnected or multiple access on port?)