search

Miceuz / i2c-moisture-sensor

I2C based soil moisture sensor
Apache License 2.0
240 stars 72 forks source link

Colour code of cable #23

Closed Rudertier closed 6 years ago

Rudertier commented 6 years ago

Hi, first of all, thanks for the quick delivery. I've ordered one rugged version of the sensor and I'm eager to play around with the device. Having the rugged version, I can not tell which cable is used for what, and I'm afraid of trying it out on my own. Any advice? 2018-04-05 08 38 32

mindforger commented 6 years ago

pulled from tindie

Rugged version Pre-coated version is available since December 2016. The sensor is coated in epoxy resin, cured and additionally protected by adhesive-lined heat shrink. The 1m (3 feet) long cable is pre-soldered. Light sensor is covered by heatshrink, so the light reading will always report total darkness. The pinout of the rugged version (with white cable): RED - VCC BLACK - GND BLUE or GREEN- SDA YELLOW - SCK Shield is not grounded on the sensor end and must be grounded on the master end.

Rudertier commented 6 years ago

Thank's a lot, some how I did not find it.