Fresh install stopped on Xserver

[Gokujo]

Creating a bug report/issue:

During a fresh install it stopped on Xserver

Required Information:

• DietPi Version_ 6.7
• SBC Device: RPi 3B
• Distro: Linux DietPi 4.14.34-v7+ #1110 SMP Mon Apr 16 15:18:51 BST 2018 armv7l GNU/Linux

  Steps to reproduce:

  I've chosen this soft to install:

• MATE: desktop enviroment
• Chromium: (Optional) web browser
• GPIO: gpio interface library for rpi (python)
• OpenSSH
• Build-Essentials: common packages for compiling
• Git Client: git clone etc Webserver ist Apache2 and SSH ist OpenSSH

[Fourdee]

@Gokujo

Thanks for the report 👍

I was unable to replicate in local testing, most likely temporary internet/APT issue, or filesystem issue.

Please try re-running the installation again.

If the same issue occurs, please paste results of (everything after/below [20.0] should be enough):

dmesg

It may also be worth trying another APT mirror: dietpi-config > Networking Options NAS/MISC > APT mirror

[Gokujo]

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.34-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1110 SMP Mon Apr 16 15:18:51 BST 2018
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3dc00000
[    0.000000] On node 0 totalpages: 255488
[    0.000000] free_area_init_node: node 0, pgdat 80c84e40, node_mem_map bd336000
[    0.000000]   Normal zone: 2246 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 255488 pages, LIFO batch:31
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 17 pages/cpu @be59f000 s38720 r8192 d22720 u69632
[    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 253242
[    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=27504eef-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 990968K/1021952K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22792K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xbe800000 - 0xff800000   (1040 MB)
                   lowmem  : 0x80000000 - 0xbe600000   ( 998 MB)
                   modules : 0x7f000000 - 0x80000000   (  16 MB)
                     .text : 0x80008000 - 0x80800000   (8160 kB)
                     .init : 0x80b00000 - 0x80c00000   (1024 kB)
                     .data : 0x80c00000 - 0x80c8fd4c   ( 576 kB)
                      .bss : 0x80c96f4c - 0x80d478b4   ( 707 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 25231 entries in 74 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000012] Switching to timer-based delay loop, resolution 52ns
[    0.000153] Console: colour dummy device 80x30
[    0.000432] console [tty1] enabled
[    0.000452] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000472] pid_max: default: 32768 minimum: 301
[    0.000648] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000667] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001219] Disabling memory control group subsystem
[    0.001275] CPU: Testing write buffer coherency: ok
[    0.001525] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001742] Setting up static identity map for 0x100000 - 0x10003c
[    0.001815] Hierarchical SRCU implementation.
[    0.002164] smp: Bringing up secondary CPUs ...
[    0.002566] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.002981] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.003377] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.003429] smp: Brought up 1 node, 4 CPUs
[    0.003465] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.003476] CPU: All CPU(s) started in HYP mode.
[    0.003485] CPU: Virtualization extensions available.
[    0.003996] devtmpfs: initialized
[    0.009407] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.009548] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.009571] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.009895] pinctrl core: initialized pinctrl subsystem
[    0.010355] NET: Registered protocol family 16
[    0.011809] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.014234] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.014251] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.014379] Serial: AMBA PL011 UART driver
[    0.015332] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.015573] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.031208] bcm2835-dma 3f007000.dma: DMA legacy API manager at be813000, dmachans=0x1
[    0.031951] SCSI subsystem initialized
[    0.032077] usbcore: registered new interface driver usbfs
[    0.032112] usbcore: registered new interface driver hub
[    0.032163] usbcore: registered new device driver usb
[    0.040048] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-16 18:18
[    0.040756] clocksource: Switched to clocksource arch_sys_counter
[    0.080587] VFS: Disk quotas dquot_6.6.0
[    0.080652] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.080823] FS-Cache: Loaded
[    0.080955] CacheFiles: Loaded
[    0.085404] NET: Registered protocol family 2
[    0.085804] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.085870] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.085972] TCP: Hash tables configured (established 8192 bind 8192)
[    0.086056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.086088] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.086221] NET: Registered protocol family 1
[    0.086490] RPC: Registered named UNIX socket transport module.
[    0.086503] RPC: Registered udp transport module.
[    0.086512] RPC: Registered tcp transport module.
[    0.086522] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.087340] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.088816] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.092901] FS-Cache: Netfs 'nfs' registered for caching
[    0.093230] NFS: Registering the id_resolver key type
[    0.093255] Key type id_resolver registered
[    0.093265] Key type id_legacy registered
[    0.093280] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.094242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.094321] io scheduler noop registered
[    0.094332] io scheduler deadline registered (default)
[    0.094476] io scheduler cfq registered
[    0.094488] io scheduler mq-deadline registered
[    0.094498] io scheduler kyber registered
[    0.095984] BCM2708FB: allocated DMA memory fdd10000
[    0.096009] BCM2708FB: allocated DMA channel 0 @ be813000
[    0.104532] Console: switching to colour frame buffer device 160x45
[    0.109454] bcm2835-rng 3f104000.rng: hwrng registered
[    0.109562] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[    0.109855] vc-sm: Videocore shared memory driver
[    0.110035] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.114963] brd: module loaded
[    0.119667] loop: module loaded
[    0.119723] Loading iSCSI transport class v2.0-870.
[    0.120141] libphy: Fixed MDIO Bus: probed
[    0.120230] usbcore: registered new interface driver lan78xx
[    0.120304] usbcore: registered new interface driver smsc95xx
[    0.121731] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.350950] Core Release: 2.80a
[    0.352317] Setting default values for core params
[    0.353688] Finished setting default values for core params
[    0.555179] Using Buffer DMA mode
[    0.556522] Periodic Transfer Interrupt Enhancement - disabled
[    0.557879] Multiprocessor Interrupt Enhancement - disabled
[    0.559229] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.560582] Dedicated Tx FIFOs mode
[    0.562139] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbdd04000 dma = 0xfdd04000 len=9024
[    0.563593] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.570537] dwc_otg: Microframe scheduler enabled
[    0.570566] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e6a40
[    0.571949] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e6da8 length 36
[    0.573324] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbe87e000
[    0.574731] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.576114] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.577503] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.578882] Init: Port Power? op_state=1
[    0.580221] Init: Power Port (0)
[    0.581670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.583048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.584438] usb usb1: Product: DWC OTG Controller
[    0.585830] usb usb1: Manufacturer: Linux 4.14.34-v7+ dwc_otg_hcd
[    0.587233] usb usb1: SerialNumber: 3f980000.usb
[    0.588965] hub 1-0:1.0: USB hub found
[    0.590375] hub 1-0:1.0: 1 port detected
[    0.592019] dwc_otg: FIQ enabled
[    0.592021] dwc_otg: NAK holdoff enabled
[    0.592024] dwc_otg: FIQ split-transaction FSM enabled
[    0.592029] Module dwc_common_port init
[    0.592156] usbcore: registered new interface driver usb-storage
[    0.593614] mousedev: PS/2 mouse device common for all mice
[    0.595004] IR NEC protocol handler initialized
[    0.596336] IR RC5(x/sz) protocol handler initialized
[    0.597652] IR RC6 protocol handler initialized
[    0.598975] IR JVC protocol handler initialized
[    0.600277] IR Sony protocol handler initialized
[    0.601588] IR SANYO protocol handler initialized
[    0.602883] IR Sharp protocol handler initialized
[    0.604173] IR MCE Keyboard/mouse protocol handler initialized
[    0.605471] IR XMP protocol handler initialized
[    0.607133] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.608593] bcm2835-cpufreq: min=600000 max=1200000
[    0.610822] sdhci: Secure Digital Host Controller Interface driver
[    0.612142] sdhci: Copyright(c) Pierre Ossman
[    0.613645] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.615140] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.616523] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.618953] ledtrig-cpu: registered to indicate activity on CPUs
[    0.620368] hidraw: raw HID events driver (C) Jiri Kosina
[    0.621772] usbcore: registered new interface driver usbhid
[    0.623073] usbhid: USB HID core driver
[    0.624721] vchiq: vchiq_init_state: slot_zero = bdd80000, is_master = 0
[    0.626937] [vc_sm_connected_init]: start
[    0.629763] vc_vchi_sm_init: failed to open VCHI service (-1)
[    0.629768] [vc_sm_connected_init]: failed to initialize shared memory service
[    0.632487] [vc_sm_connected_init]: end - returning -1
[    0.634212] Initializing XFRM netlink socket
[    0.635570] NET: Registered protocol family 17
[    0.636966] Key type dns_resolver registered
[    0.638513] Registering SWP/SWPB emulation handler
[    0.640141] registered taskstats version 1
[    0.644680] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.646084] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.648479] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.649871] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    0.711126] sdhost: log_buf @ bdd07000 (fdd07000)
[    0.790784] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.792685] of_cfs_init
[    0.794118] of_cfs_init: OK
[    0.795790] Waiting for root device PARTUUID=27504eef-02...
[    0.817417] Indeed it is in host mode hprt0 = 00021501
[    0.989225] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.995627] mmc0: new high speed SDHC card at address aaaa
[    0.997311] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[    1.000033]  mmcblk0: p1 p2
[    1.016673] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    1.018160] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    1.020800] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.022384] Indeed it is in host mode hprt0 = 00001101
[    1.260951] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.262488] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.264345] hub 1-1:1.0: USB hub found
[    1.265872] hub 1-1:1.0: 5 ports detected
[    1.580766] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.710914] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.712396] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.716172] smsc95xx v1.0.6
[    1.802583] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cf:52:60
[    1.900764] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[    1.975566] EXT4-fs (mmcblk0p2): recovery complete
[    1.988880] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.990472] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.003090] devtmpfs: mounted
[    2.006270] Freeing unused kernel memory: 1024K
[    2.041347] usb 1-1.4: New USB device found, idVendor=148f, idProduct=7601
[    2.042926] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.044497] usb 1-1.4: Product: 802.11 n WLAN
[    2.046064] usb 1-1.4: Manufacturer: MediaTek
[    2.047618] usb 1-1.4: SerialNumber: 1.0
[    2.140783] usb 1-1.5: new full-speed USB device number 5 using dwc_otg
[    2.283058] usb 1-1.5: New USB device found, idVendor=067b, idProduct=2303
[    2.284667] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.286246] usb 1-1.5: Product: USB-Serial Controller
[    2.287760] usb 1-1.5: Manufacturer: Prolific Technology Inc.
[    2.475422] systemd[1]: System time before build time, advancing clock.
[    2.613896] NET: Registered protocol family 10
[    2.616195] Segment Routing with IPv6
[    2.627547] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.652638] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.656300] systemd[1]: Detected architecture arm.
[    2.674640] systemd[1]: Set hostname to <DietPi>.
[    2.991294] systemd[1]: apt-daily-upgrade.timer: Cannot add dependency job, ignoring: Unit apt-daily-upgrade.timer is masked.
[    2.993051] systemd[1]: apt-daily.timer: Cannot add dependency job, ignoring: Unit apt-daily.timer is masked.
[    2.994995] systemd[1]: getty-static.service: Cannot add dependency job, ignoring: Unit getty-static.service is masked.
[    2.999183] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.003296] systemd[1]: Listening on udev Kernel Socket.
[    3.007158] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.011136] systemd[1]: Listening on Journal Socket.
[    3.481764] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    3.665119] systemd-journald[98]: Received request to flush runtime journal from PID 1
[    3.753247] Adding 1097724k swap on /var/swap.  Priority:-2 extents:6 across:2646012k SSFS
[    3.820811] mmc1: error -110 whilst initialising SDIO card
[    3.886716] rpi-ft5406 rpi_ft5406: Probing device
[    3.887267] input: FT5406 memory based driver as /devices/virtual/input/input0
[    4.022485] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    4.025209] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[    4.236565] usbcore: registered new interface driver usbserial
[    4.236599] usbcore: registered new interface driver usbserial_generic
[    4.236626] usbserial: USB Serial support registered for generic
[    4.286738] usbcore: registered new interface driver pl2303
[    4.286777] usbserial: USB Serial support registered for pl2303
[    4.286838] pl2303 1-1.5:1.0: pl2303 converter detected
[    4.292742] usb 1-1.5: pl2303 converter now attached to ttyUSB0
[    4.420803] usb 1-1.4: reset high-speed USB device number 4 using dwc_otg
[    4.467829] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.553428] mt7601u 1-1.4:1.0: ASIC revision: 76010001 MAC revision: 76010500
[    4.562431] mt7601u 1-1.4:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[    4.913069] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    4.913174] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.057162] mt7601u 1-1.4:1.0: Warning: unsupported EEPROM version 0d
[    5.057171] mt7601u 1-1.4:1.0: EEPROM ver:0d fae:00
[    5.304096] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.306243] usbcore: registered new interface driver mt7601u
[    6.532582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.533756] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[    6.940776] mmc1: error -110 whilst initialising SDIO card
[   10.100771] mmc1: error -110 whilst initialising SDIO card
[   13.200771] mmc1: error -110 whilst initialising SDIO card
[   20.051312] random: crng init done
[   25.890783] usb 1-1.2: new low-speed USB device number 6 using dwc_otg
[   26.040193] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0023
[   26.040199] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   26.063972] input: HID 046a:0023 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046A:0023.0001/input/input1
[   26.071102] input: HID 046a:0023 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046A:0023.0002/input/input2
[   26.131402] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-3f980000.usb-1.2/input0
[   26.200987] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-3f980000.usb-1.2/input1
[   65.991454] Adding 1097724k swap on /var/swap.  Priority:-2 extents:7 across:1523708k SSFS

[Fourdee]

@Gokujo

~Thanks, looks fine.~

[ 6.940776] mmc1: error -110 whilst initialising SDIO card

Which SDcard and PSU used on the device?

[Gokujo]

I tell you this in monday

[Fourdee]

No response, marking as closed. Please reopen if required.

[Gokujo]

@Fourdee sorry, I've forgotten to post here. We use SD-Cards from SanDisk and ther original PSu that was delivered with the device.

I tried installation on 3 devices - same problem. we waited 4-7 hours to see what happens and on one device the installation continued after 4 hours and on second one after ca 6 or 7 hours. and this is strange because usually it takes ca 30 minutes.

[Fourdee]

@Gokujo

Thanks 👍

Please send us a bug report on the affected device, i'd like to check your system configuration:

dietpi-bugreport

And please reply with the Reference CODE

[Gokujo]

6388b7b3-76e7-4531-a684-b0b132abee7e-0

[Fourdee]

@Gokujo

Many thanks for sending the bug report 👍

Ok, this is typical of system instability (eg: insufficent PSU), failing SD card, and/or a power cut during IO write operations that has corrupted the filesystem.

[    4.990984] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Not sure what this means yet, mmc1 should not exist? as mmc0 is the SD card.

[   13.160784] mmc1: error -110 whilst initialising SDIO card

However, from my system, it does exist and appears to init SDIO for mmc1.

[    0.756964] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.875016] mmc1: new high speed SDIO card at address 0001

---

@Gokujo

Ok, few things we can do:

• Please verify the exact PSU used on the device (brand/model/voltage/AMP)
• Try repairing the filesystem fsck -f -y /boot, then reboot and see if the error is removed from dmesg

Failing the above, and the PSU is sufficient, please a fresh reinstall:

• Full format the SD card: https://github.com/Fourdee/DietPi/issues/769#issuecomment-283030267
• Fresh install of DietPi
• Reinstall the software you require

[Gokujo]

Please verify the exact PSU used on the device (brand/model/voltage/AMP)

Try repairing the filesystem fsck -f -y /boot, then reboot and see if the error is removed from dmesg

[    0.000000] Linux version 4.14.34-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1110 SMP Mon Apr 16 15:18:51 BST 2018
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3b800000
[    0.000000] On node 0 totalpages: 245760
[    0.000000] free_area_init_node: node 0, pgdat 80c84e40, node_mem_map baf86000
[    0.000000]   Normal zone: 2160 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 245760 pages, LIFO batch:31
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 17 pages/cpu @baf2f000 s38720 r8192 d22720 u69632
[    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 243600
[    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=27504eef-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 952416K/983040K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22432K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xbc800000 - 0xff800000   (1072 MB)
                   lowmem  : 0x80000000 - 0xbc000000   ( 960 MB)
                   modules : 0x7f000000 - 0x80000000   (  16 MB)
                     .text : 0x80008000 - 0x80800000   (8160 kB)
                     .init : 0x80b00000 - 0x80c00000   (1024 kB)
                     .data : 0x80c00000 - 0x80c8fd4c   ( 576 kB)
                      .bss : 0x80c96f4c - 0x80d478b4   ( 707 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 25231 entries in 74 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000012] Switching to timer-based delay loop, resolution 52ns
[    0.000154] Console: colour dummy device 80x30
[    0.000430] console [tty1] enabled
[    0.000450] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000470] pid_max: default: 32768 minimum: 301
[    0.000647] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000665] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001220] Disabling memory control group subsystem
[    0.001276] CPU: Testing write buffer coherency: ok
[    0.001528] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001746] Setting up static identity map for 0x100000 - 0x10003c
[    0.001819] Hierarchical SRCU implementation.
[    0.002170] smp: Bringing up secondary CPUs ...
[    0.002571] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.002984] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.003381] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.003433] smp: Brought up 1 node, 4 CPUs
[    0.003470] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.003481] CPU: All CPU(s) started in HYP mode.
[    0.003490] CPU: Virtualization extensions available.
[    0.003997] devtmpfs: initialized
[    0.009391] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.009529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.009553] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.009879] pinctrl core: initialized pinctrl subsystem
[    0.010340] NET: Registered protocol family 16
[    0.011787] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.014204] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.014220] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.014347] Serial: AMBA PL011 UART driver
[    0.015299] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.015541] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.031168] bcm2835-dma 3f007000.dma: DMA legacy API manager at bc813000, dmachans=0x1
[    0.031914] SCSI subsystem initialized
[    0.032041] usbcore: registered new interface driver usbfs
[    0.032076] usbcore: registered new interface driver hub
[    0.032126] usbcore: registered new device driver usb
[    0.040052] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-16 18:16
[    0.040758] clocksource: Switched to clocksource arch_sys_counter
[    0.080599] VFS: Disk quotas dquot_6.6.0
[    0.080664] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.080836] FS-Cache: Loaded
[    0.080969] CacheFiles: Loaded
[    0.085425] NET: Registered protocol family 2
[    0.085826] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.085892] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.085994] TCP: Hash tables configured (established 8192 bind 8192)
[    0.086078] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.086109] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.086241] NET: Registered protocol family 1
[    0.086509] RPC: Registered named UNIX socket transport module.
[    0.086522] RPC: Registered udp transport module.
[    0.086532] RPC: Registered tcp transport module.
[    0.086541] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.087369] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.088844] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.092912] FS-Cache: Netfs 'nfs' registered for caching
[    0.093244] NFS: Registering the id_resolver key type
[    0.093271] Key type id_resolver registered
[    0.093281] Key type id_legacy registered
[    0.093296] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.094250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.094330] io scheduler noop registered
[    0.094341] io scheduler deadline registered (default)
[    0.094486] io scheduler cfq registered
[    0.094497] io scheduler mq-deadline registered
[    0.094507] io scheduler kyber registered
[    0.096020] BCM2708FB: allocated DMA memory fb910000
[    0.096046] BCM2708FB: allocated DMA channel 0 @ bc813000
[    0.111916] Console: switching to colour frame buffer device 160x45
[    0.120002] bcm2835-rng 3f104000.rng: hwrng registered
[    0.120142] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.120492] vc-sm: Videocore shared memory driver
[    0.120703] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.125699] brd: module loaded
[    0.130495] loop: module loaded
[    0.130570] Loading iSCSI transport class v2.0-870.
[    0.131090] libphy: Fixed MDIO Bus: probed
[    0.131205] usbcore: registered new interface driver lan78xx
[    0.131312] usbcore: registered new interface driver smsc95xx
[    0.133690] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.363862] Core Release: 2.80a
[    0.366194] Setting default values for core params
[    0.368498] Finished setting default values for core params
[    0.570971] Using Buffer DMA mode
[    0.573267] Periodic Transfer Interrupt Enhancement - disabled
[    0.575583] Multiprocessor Interrupt Enhancement - disabled
[    0.577894] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.580201] Dedicated Tx FIFOs mode
[    0.582727] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbb904000 dma = 0xfb904000 len=9024
[    0.585173] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.597093] dwc_otg: Microframe scheduler enabled
[    0.597125] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e6a40
[    0.599485] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e6da8 length 36
[    0.601796] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbc87e000
[    0.604184] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.606547] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.608914] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.611259] Init: Port Power? op_state=1
[    0.613554] Init: Power Port (0)
[    0.615944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.618271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620654] usb usb1: Product: DWC OTG Controller
[    0.623059] usb usb1: Manufacturer: Linux 4.14.34-v7+ dwc_otg_hcd
[    0.625473] usb usb1: SerialNumber: 3f980000.usb
[    0.628235] hub 1-0:1.0: USB hub found
[    0.630635] hub 1-0:1.0: 1 port detected
[    0.633262] dwc_otg: FIQ enabled
[    0.633264] dwc_otg: NAK holdoff enabled
[    0.633267] dwc_otg: FIQ split-transaction FSM enabled
[    0.633273] Module dwc_common_port init
[    0.633404] usbcore: registered new interface driver usb-storage
[    0.635800] mousedev: PS/2 mouse device common for all mice
[    0.638152] IR NEC protocol handler initialized
[    0.640431] IR RC5(x/sz) protocol handler initialized
[    0.642696] IR RC6 protocol handler initialized
[    0.644960] IR JVC protocol handler initialized
[    0.647187] IR Sony protocol handler initialized
[    0.649403] IR SANYO protocol handler initialized
[    0.651588] IR Sharp protocol handler initialized
[    0.653790] IR MCE Keyboard/mouse protocol handler initialized
[    0.656015] IR XMP protocol handler initialized
[    0.658600] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.661014] bcm2835-cpufreq: min=600000 max=1200000
[    0.664464] sdhci: Secure Digital Host Controller Interface driver
[    0.666724] sdhci: Copyright(c) Pierre Ossman
[    0.669121] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.671577] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.673921] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.677322] ledtrig-cpu: registered to indicate activity on CPUs
[    0.679684] hidraw: raw HID events driver (C) Jiri Kosina
[    0.682005] usbcore: registered new interface driver usbhid
[    0.684220] usbhid: USB HID core driver
[    0.686779] vchiq: vchiq_init_state: slot_zero = bb980000, is_master = 0
[    0.690047] [vc_sm_connected_init]: start
[    0.697448] [vc_sm_connected_init]: end - returning 0
[    0.700053] Initializing XFRM netlink socket
[    0.702322] NET: Registered protocol family 17
[    0.704645] Key type dns_resolver registered
[    0.707104] Registering SWP/SWPB emulation handler
[    0.709672] registered taskstats version 1
[    0.715176] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.717486] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.720884] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.723247] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    0.781136] sdhost: log_buf @ bb907000 (fb907000)
[    0.850816] Indeed it is in host mode hprt0 = 00021501
[    0.860785] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.863665] of_cfs_init
[    0.866009] of_cfs_init: OK
[    0.868573] Waiting for root device PARTUUID=27504eef-02...
[    1.000223] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.007078] mmc0: new high speed SDHC card at address aaaa
[    1.009725] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[    1.013425]  mmcblk0: p1 p2
[    1.033900] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.036401] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.050385] devtmpfs: mounted
[    1.054534] Freeing unused kernel memory: 1024K
[    1.060775] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.063450] Indeed it is in host mode hprt0 = 00001101
[    1.310996] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.313638] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.316598] hub 1-1:1.0: USB hub found
[    1.319172] hub 1-1:1.0: 5 ports detected
[    1.549792] systemd[1]: System time before build time, advancing clock.
[    1.640787] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.694551] NET: Registered protocol family 10
[    1.697764] Segment Routing with IPv6
[    1.710212] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.736576] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.742385] systemd[1]: Detected architecture arm.
[    1.765282] systemd[1]: Set hostname to <TimeTracking>.
[    1.770968] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.773780] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.778945] smsc95xx v1.0.6
[    1.882887] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:cf:52:60
[    2.180799] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    2.189244] systemd[1]: apt-daily.timer: Cannot add dependency job, ignoring: Unit apt-daily.timer is masked.
[    2.192268] systemd[1]: apt-daily-upgrade.timer: Cannot add dependency job, ignoring: Unit apt-daily-upgrade.timer is masked.
[    2.195620] systemd[1]: getty-static.service: Cannot add dependency job, ignoring: Unit getty-static.service is masked.
[    2.201490] systemd[1]: Listening on udev Kernel Socket.
[    2.208301] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.215188] systemd[1]: Created slice System Slice.
[    2.221736] systemd[1]: Reached target Remote File Systems.
[    2.329318] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0023
[    2.332500] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.460845] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    2.611505] usb 1-1.3: New USB device found, idVendor=148f, idProduct=7601
[    2.611516] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.611520] usb 1-1.3: Product: 802.11 n WLAN
[    2.611525] usb 1-1.3: Manufacturer: MediaTek
[    2.611529] usb 1-1.3: SerialNumber: 1.0
[    2.720796] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
[    2.776485] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    2.856917] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c534
[    2.856928] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.856932] usb 1-1.4: Product: USB Receiver
[    2.856937] usb 1-1.4: Manufacturer: Logitech
[    2.872076] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0003/input/input0
[    2.941443] hid-generic 0003:046D:C534.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.4/input0
[    2.947113] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input1
[    2.974327] Adding 511996k swap on /var/swap.  Priority:-2 extents:1 across:511996k SSFS
[    2.997576] systemd-journald[94]: Received request to flush runtime journal from PID 1
[    3.011355] hid-generic 0003:046D:C534.0004: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.4/input1
[    3.110852] usb 1-1.5: new full-speed USB device number 7 using dwc_otg
[    3.243043] usb 1-1.5: New USB device found, idVendor=067b, idProduct=2303
[    3.243056] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.243060] usb 1-1.5: Product: USB-Serial Controller
[    3.243065] usb 1-1.5: Manufacturer: Prolific Technology Inc.
[    3.269397] rpi-ft5406 rpi_ft5406: Probing device
[    3.269901] input: FT5406 memory based driver as /devices/virtual/input/input2
[    3.282110] input: HID 046a:0023 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046A:0023.0001/input/input3
[    3.352505] cherry 0003:046A:0023.0001: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-3f980000.usb-1.2/input0
[    3.353621] input: HID 046a:0023 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046A:0023.0002/input/input4
[    3.421089] cherry 0003:046A:0023.0002: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-3f980000.usb-1.2/input1
[    3.620787] usb 1-1.3: reset high-speed USB device number 5 using dwc_otg
[    3.753019] mt7601u 1-1.3:1.0: ASIC revision: 76010001 MAC revision: 76010500
[    3.758534] mt7601u 1-1.3:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[    3.800773] mmc1: error -110 whilst initialising SDIO card
[    4.259717] mt7601u 1-1.3:1.0: Warning: unsupported EEPROM version 0d
[    4.259723] mt7601u 1-1.3:1.0: EEPROM ver:0d fae:00
[    4.486599] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.487358] usbcore: registered new interface driver mt7601u
[    4.630513] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    4.632513] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[    4.639258] usbcore: registered new interface driver usbserial
[    4.639295] usbcore: registered new interface driver usbserial_generic
[    4.639323] usbserial: USB Serial support registered for generic
[    4.645825] usbcore: registered new interface driver pl2303
[    4.645859] usbserial: USB Serial support registered for pl2303
[    4.645927] pl2303 1-1.5:1.0: pl2303 converter detected
[    4.652200] usb 1-1.5: pl2303 converter now attached to ttyUSB0
[    5.002766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.994179] FS-Cache: Netfs 'cifs' registered for caching
[    5.994519] Key type cifs.spnego registered
[    5.994533] Key type cifs.idmap registered
[    6.058505] CIFS VFS: Error connecting to socket. Aborting operation.
[    6.058520] CIFS VFS: cifs_mount failed w/return code = -111
[    6.990773] mmc1: error -110 whilst initialising SDIO card
[    7.132090] wlan0: authenticate with 00:0f:bb:07:0c:2a
[    7.193436] wlan0: send auth to 00:0f:bb:07:0c:2a (try 1/3)
[    7.195071] wlan0: authenticated
[    7.195301] mt7601u 1-1.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[    7.195306] mt7601u 1-1.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[    7.200807] wlan0: associate with 00:0f:bb:07:0c:2a (try 1/3)
[    7.203510] wlan0: RX AssocResp from 00:0f:bb:07:0c:2a (capab=0x431 status=0 aid=2)
[    7.236115] wlan0: associated
[    7.437459] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   10.110777] mmc1: error -110 whilst initialising SDIO card
[   13.210870] mmc1: error -110 whilst initialising SDIO card
[   15.360112] CIFS VFS: Error connecting to socket. Aborting operation.
[   15.360123] CIFS VFS: cifs_mount failed w/return code = -111
[   26.137333] random: crng init done

this message I got from fresh installed dietpi. this time it took 30-40 minutes with all software (automated install don't work yet? e.g. AUTO_SETUP_INSTALL_SOFTWARE_ID= in dietpi on first install)

[Fourdee]

@Gokujo

This PSU has reports of failing quickly overtime: https://www.amazon.de/SpeedPower%C2%AE-High-Quality-Netzteil-Ladeger%C3%A4t-Raspberry/product-reviews/B00KIVA70O/ref=cm_cr_dp_d_hist_1?ie=UTF8&filterByStar=one_star&reviewerType=all_reviews#reviews-filter-bar

I'd highly recommend official RPi PSU.

I personally use the following for all DietPi testing, and, can confirm this is also a valid choice: https://www.amazon.co.uk/RAVPower-4-Port-Desktop-Charger-iSmart-Black/dp/B00GX3BKKW

---

(automated install don't work yet? e.g. AUTO_SETUP_INSTALL_SOFTWARE_ID= in dietpi on first install)

Should be working fine once set. Make sure AUTO_SETUP_AUTOMATED=1 is also set (ref https://dietpi.com/phpbb/viewtopic.php?f=8&t=273)

Can you attach/paste the contents of the dietpi.txt file you modified? I'll take a look.

[Gokujo]

@Fourdee

I'd highly recommend official RPi PSU

This one was delivered with raspberry

Should be working fine once set.

I didn't saw it on first look

I'll take a look.

#Please ensure you edit from the DietPi-RamDisk location /DietPi/*

#NB: This is intended for advanced users, unless you know what you are doing, do not edit this file. Please use the DietPi programs instead.
#NB: Do not remove uncommented lines, as the items are scraped by DietPi programs, on demand.

#------------------------------------------------------------------------------------------------------
# DietPi-Automation
# All settings below will be applied on the 1st boot of DietPi, ONCE.
#------------------------------------------------------------------------------------------------------

##### Networking Options #####

#   If both Ethernet and Wifi are enabled, Wifi will take priority and Ethernet will be disabled.
#       1=enabled
AUTO_SETUP_NET_ETHERNET_ENABLED=1
AUTO_SETUP_NET_WIFI_ENABLED=1

#   Enter your Wifi details below, if applicable (Case Sensitive).
AUTO_SETUP_NET_WIFI_SSID=WLAN_GAST
AUTO_SETUP_NET_WIFI_KEY=PASS
#   available | WPA-PSK / WPA-EAP / NONE | WEP=No longer supported
AUTO_SETUP_NET_WIFI_KEYMGR=WPA-PSK

#  For WPA2 Enterprise uncomment the following entries and set accordingly
#AUTO_SETUP_NET_WIFI_PROTO=RSN
#AUTO_SETUP_NET_WIFI_PAIRWISE=CCMP
#AUTO_SETUP_NET_WIFI_AUTH_ALG=SHARED
#AUTO_SETUP_NET_WIFI_EAP=PEAP
#AUTO_SETUP_NET_WIFI_IDENTITY=User
#AUTO_SETUP_NET_WIFI_PASSWORD=Pass
#
# If your WPA2 Enterprise requries a certificate copy the cert to this /boot directory and enter the name on the following line
#AUTO_SETUP_NET_WIFI_CERT=wpa2ent_cert.cer
# Uncomment either or both lines below and set accordingly for your WPA2 Enterprise needs.
#AUTO_SETUP_NET_WIFI_PHASE1=
#AUTO_SETUP_NET_WIFI_PHASE2=auth=MSCHAPV2

#   Enter your Static Network details below, if applicable.
AUTO_SETUP_NET_USESTATIC=0
AUTO_SETUP_NET_STATIC_IP=192.168.13.34
AUTO_SETUP_NET_STATIC_MASK=255.255.255.0
AUTO_SETUP_NET_STATIC_GATEWAY=192.168.0.10
AUTO_SETUP_NET_STATIC_DNS=1.1.1.1

#   Hostname
AUTO_SETUP_NET_HOSTNAME=JAS-TT

#   Force ethernet speeds
#       NB: This is mainly aimed towards Pine A64's which may have a HW issue that causes unstable 1Gbit link.
#       0=automatic speed | 10 = 10mbit, 100 = 100mbit etc
AUTO_SETUP_NET_ETH_FORCE_SPEED=0

##### Misc Options #####

#   Size of swapfile to generate (MB)
#       0=Disabled | 1=auto (2GB-RAM = size) | 2+=manual
AUTO_SETUP_SWAPFILE_SIZE=500
#       Optional swapfile location
AUTO_SETUP_SWAPFILE_LOCATION=/var/swap

##### Software Automation Options #####

#   Fully automate installation
#       1=Automated installation with no user inputs.
#       It is HIGHLY recommended to also set CONFIG_BOOT_WAIT_FOR_NETWORK=2, to force infinite wait for network connection during boot, preventing no connection errors due to timeout.
AUTO_SETUP_AUTOMATED=1

#   Global Password to be applied for the system
#       Affects user "root" and "dietpi" login passwords, and, all software installed by dietpi-software, that requires a password
#       eg: MySQL, Transmission, Deluge etc.
#       WARN: Passwords with the any of the following characters are not supported: \"$
#       WARN: Do NOT change this entry after 1st run setup of DietPi has been completed. It is always scraped by dietpi-software.
AUTO_SETUP_GLOBAL_PASSWORD=dietpi

#   DietPi-Software to automatically install. | requires AUTO_SETUP_AUTOMATED=1
#   For a list of software index's (ID's), run '/DietPi/dietpi/dietpi-software list'
#   No limit on number entries, add as many as you need and uncomment the line.
#   DietPi will automatically install all pre-reqs (eg: ALSA/XSERVER for desktops etc)
#   - Examples:
AUTO_SETUP_INSTALL_SOFTWARE_ID=0    #openssh client
AUTO_SETUP_INSTALL_SOFTWARE_ID=16   #build-essentials
AUTO_SETUP_INSTALL_SOFTWARE_ID=17   #git client
AUTO_SETUP_INSTALL_SOFTWARE_ID=24   #mate: desktop enviroment +alsa +xserver
AUTO_SETUP_INSTALL_SOFTWARE_ID=69   #rpi.gpio
AUTO_SETUP_INSTALL_SOFTWARE_ID=103  #dietpi-ramlog
AUTO_SETUP_INSTALL_SOFTWARE_ID=105  #openssh server
AUTO_SETUP_INSTALL_SOFTWARE_ID=106  #ntp
AUTO_SETUP_INSTALL_SOFTWARE_ID=113  #chromium
AUTO_SETUP_INSTALL_SOFTWARE_ID=120  #realvnc server

#   DietPi-Software Choice System
#   SSH Server Selection:
#       0=none
#       -1=dropbear
#       -2=opensshserver
AUTO_SETUP_SSH_SERVER_INDEX=-2

#   File Server Selection:
#       0=none/manual
#       -1=proftp
#       -2=samba
AUTO_SETUP_FILE_SERVER_INDEX=0

#   Logging Mode Selection:
#       0=none/manual
#       -1=ramlog 1h clear
#       -2=ramlog 1h save clear
#       -3=logrotate + rsyslog
AUTO_SETUP_LOGGING_INDEX=-1

#   Webserver Preference Selection:
#   NB: This will get ignored, if you have manually selected any WEBSERVER_Stack.
#       0=Apache2
#       -1=Nginx
#       -2=Lighttpd
AUTO_SETUP_WEB_SERVER_INDEX=0

#   DietPi-Autostart | Requires AUTO_SETUP_AUTOMATED=1
#   After installation is completed, which program should the system boot to?
#       0=Console 7=Console+auto root login | 1=Kodi 2=Desktops (LXDE/MATE etc) 5=DietPi-Cloudshell 6=Uae4ARM (Fastboot) 8=Uae4ARM (standard boot) 9=dxx-rebirth
AUTO_SETUP_AUTOSTART_TARGET_INDEX=2

#   Language/Regional settings | Requires AUTO_SETUP_AUTOMATED=1
#       Timezone eg: Europe/London America/New_York | Full list (TZ*): https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
AUTO_SETUP_TIMEZONE=Europe/Berlin
#       Locale eg: en_GB.UTF-8 / en_US.UTF-8 etc. One entry ONLY.
AUTO_SETUP_LOCALE=de_DE.UTF-8
#       Keyboard Layout eg: gb us de fr
AUTO_SETUP_KEYBOARD_LAYOUT=de

#   Custom Script | Requires AUTO_SETUP_AUTOMATED=1
#       Allows you to automatically execute a custom script at the end of DietPi installation.
#       Option 1 = Copy your script to /boot/Automation_Custom_Script.sh and it will be executed automatically.
#       Option 2 = Host your script online, then use AUTO_SETUP_CUSTOM_SCRIPT_EXEC=http://myweb.com/myscript.sh , it will be downloaded and executed automatically. | 0=disabled
#       NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_script.log
AUTO_SETUP_CUSTOM_SCRIPT_EXEC=0

#------------------------------------------------------------------------------------------------------
# D I E T - P I
# DietPi-Config settings.
#------------------------------------------------------------------------------------------------------
#RPi Hdmi output (if 0, sets tvservice -o and framebuffer 16x 16y 8z on boot, headless)
CONFIG_HDMI_OUTPUT=1

#Cpu Governor | ondemand | powersave | performance | conservative
CONFIG_CPU_GOVERNOR=ondemand
CONFIG_CPU_USAGE_THROTTLE_UP=50

#Limit the max cpu frequency (Mhz) for all cores. | Disabled=disabled | Useful for lowering temp/power usage on your device.
CONFIG_CPU_MAX_FREQ=Disabled

#Limit the min cpu frequency (Mhz) for all cores. | Disabled=disabled | Useful for 1-wire correct support (eg. 480Mhz).
CONFIG_CPU_MIN_FREQ=Disabled

#Min value 10000 microseconds (10ms)
CONFIG_CPU_ONDEMAND_SAMPLE_RATE=25000

#sampling rate * down factor / 1000 = Milliseconds (40 = 1000ms when sampling rate is 25000)
CONFIG_CPU_ONDEMAND_SAMPLE_DOWNFACTOR=80

#Samba Client Details (Used by DietPi-Config | Networking NAS | Samba Client)
#   NB: Do not modify, you must use dietpi-config to configure/set options
CONFIG_SMBCLIENT_COMPUTERNAME=computername
CONFIG_SMBCLIENT_SHARENAME=sharename
CONFIG_SMBCLIENT_USERNAME=username
CONFIG_SMBCLIENT_PASSWORD=password

#FTP Client Filesystem Mount (CurlFtpFs) (Used by DietPi-Config | Networking NAS | FTP Client)
#   NB: Do not modify, you must use dietpi-config to configure/set options
CONFIG_CURLFTPFS_ADDRESS=192.168.0.100
CONFIG_CURLFTPFS_USERNAME=username
CONFIG_CURLFTPFS_PASSWORD=password

#NFS Client Filesystem Mount (Used by DietPi-Config | Networking NAS | NFS Client)
#   NB: Do not modify, you must use dietpi-config to configure/set options
CONFIG_NFSCLIENT_ADDRESS=

#Proxy settings | System-wide proxy settings. Use dietpi-config > networking options to apply.
#   NB: Do not modify, you must use dietpi-config to configure/set options
CONFIG_PROXY_ENABLED=0
CONFIG_PROXY_ADDRESS=MyProxyServer.com
CONFIG_PROXY_PORT=8080
CONFIG_PROXY_USERNAME=
CONFIG_PROXY_PASSWORD=

#Delay boot until network is established: 0=disabled | 1=10 second wait max (default) | 2=infinite wait
CONFIG_BOOT_WAIT_FOR_NETWORK=1

#DietPi check for updates (allows dietpi to check for updates on a daily basis and boot using a <1kb file download.)
CONFIG_CHECK_DIETPI_UPDATES=1

#NTPD Update Mode: 0=disabled | 1=boot only | 2=boot + daily | 3=boot + hourly | 4=Daemon + Drift
CONFIG_NTP_MODE=2

#WiFi country code. 2 character value (eg GB US DE JP): https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
CONFIG_WIFI_COUNTRY_CODE=DE

#Serial Console: Set to 1 if you require a serial console during 1st run of DietPi.
CONFIG_SERIAL_CONSOLE_ENABLE=0

#Soundcard
CONFIG_SOUNDCARD=rpi-bcm2835-ultrahq

#LCD Panel addon
#   NB: Do not modify, you must use dietpi-config to configure/set options
CONFIG_LCDPANEL=none

#Prefer IPversion (for: APT, wget) | auto (let system decide) / ipv4 (force) / ipv6 (prefer) | eg: force IPv4 with CONFIG_PREFER_IPVERSION=ipv4
CONFIG_PREFER_IPVERSION=ipv4

#Apt mirrors which are applied to /etc/apt/sources.list | Values here will also be applied during 1st run setup
#   Raspbian = https://www.raspbian.org/RaspbianMirrors
#   Debian = https://www.debian.org/mirror/official#list
CONFIG_APT_RASPBIAN_MIRROR=ftp://mirror.netcologne.de/raspbian/raspbian/
CONFIG_APT_DEBIAN_MIRROR=ftp.de.debian.org/debian/

#NTPD mirror, applied to /etc/ntp.conf
#   For a full list, please see http://www.pool.ntp.org
#   Please remove the initial interger and full stop from the value (removing 0.). eg: debian.pool.ntp.org
CONFIG_NTP_MIRROR=de.pool.ntp.org

#------------------------------------------------------------------------------------------------------
# D I E T - P I
# DietPi-Software settings.
#------------------------------------------------------------------------------------------------------
#Enter your EmonCMS.org write API key here. It will be applied automatically during EmonPi/Hub installation.
#   eg: SOFTWARE_EMONHUB_APIKEY=b4dfmk2o203mmxx93a
SOFTWARE_EMONHUB_APIKEY=

#VNC Server Options
SOFTWARE_VNCSERVER_WIDTH=1280
SOFTWARE_VNCSERVER_HEIGHT=720
SOFTWARE_VNCSERVER_DEPTH=16
SOFTWARE_VNCSERVER_DISPLAY_INDEX=1
SOFTWARE_VNCSERVER_SHARE_DESKTOP=0

#Optional username for ownCloud/Nextcloud admin account, default is 'admin'. Applied during installation.
SOFTWARE_OWNCLOUD_NEXTCLOUD_USERNAME=admin

#Optional data directory for ownCloud, default is '/mnt/dietpi_userdata/owncloud_data'. Applied during installation.
#   This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location.
SOFTWARE_OWNCLOUD_DATADIR=/mnt/dietpi_userdata/owncloud_data

#Optional data directory for Nextcloud, default is '/mnt/dietpi_userdata/nextcloud_data'. Applied during installation.
#   This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location.
SOFTWARE_NEXTCLOUD_DATADIR=/mnt/dietpi_userdata/nextcloud_data

#Wifi Hotspot
SOFTWARE_WIFI_HOTSPOT_SSID=DietPi-HotSpot
#   minimum of 8 characters
SOFTWARE_WIFI_HOTSPOT_KEY=dietpihotspot
SOFTWARE_WIFI_HOTSPOT_CHANNEL=3

#------------------------------------------------------------------------------------------------------
# D I E T - P I
# Dev settings
#------------------------------------------------------------------------------------------------------
DEV_GITBRANCH=master
DEV_GITOWNER=Fourdee

[Fourdee]

@Gokujo

Thanks for dietpi.txt, looks fine.

Lets check whats installed:

dietpi-software list | grep ' =2 '

And please paste the automation/1st run log:

cat /var/tmp/dietpi/logs/dietpi-firstrun-setup.log

---

This one was delivered with raspberry

Its still not official, stability cannot be guaranteed unfortunately. Ideally need to use one of these to establish if voltage is 5v+ under load: https://www.amazon.co.uk/UEB-Voltage-Current-Detector-Capacity-White/dp/B017TY0GWQ/ref=pd_cp_147_4?_encoding=UTF8&psc=1&refRID=86W5AQ4BXGFJCDPNEYBM

[Gokujo]

I can send it a little bit later. I tried to add rasppbery into Windows Active Directory but there went something wrong and no passwords were synchronized. And automated installation went well. Like I said I didn't noticed this line in config: AUTO_SETUP_AUTOMATED=. But I couldn't connect to enterprise wi-fi network. I had to use a simple WPA-PSK

[Gokujo]

@Fourdee

dietpi-software list | grep ' =2 '

cat /var/tmp/dietpi/logs/dietpi-firstrun-setup.log

Long logdata

--- ``` [ INFO ] DietPi-Drive_Manager | Checking RootFS R/W access. Please wait... [ OK ] DietPi-Drive_Manager | RootFS R/W access. [ INFO ] DietPi-Software | Initializing database, please wait... [ INFO ] DietPi-Software | Reading database, please wait... [ INFO ] DietPi-Software | DietPi - GPLv2 License: This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/ ─────────────────────────────────────── DietPi | 10:51 | Fri 11/05/18 ─────────────────────────────────────── v6.7 | RPi 3 Model B (armv7l) ─────────────────────────────────────── NULL | ─────────────────────────────────────── Welcome to DietPi-Software DietPi-Software | (1/5) Testing connection to ftp://mirror.netcologne.de/raspbian/raspbian/, please wait... [. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] DietPi-Software | Failed connection attempt (1/5), retrying... DietPi-Software | (2/5) Testing connection to ftp://mirror.netcologne.de/raspbian/raspbian/, please wait... [ ..] [ ..] [ OK ] DietPi-Software | Connection test: ftp://mirror.netcologne.de/raspbian/raspbian/ [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (1/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (2/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (3/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (4/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (5/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (6/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (7/30) [ INFO ] DietPi-Run_ntpd | NTPD: Waiting for completion of time sync (8/30) [ OK ] NTPD: time sync | Completed DietPi-Software ───────────────────────────────────────────────────── Mode: Running automated installation [ INFO ] DietPi-Software | Automation: OpenSSH Client. Flagged for installation. [ INFO ] DietPi-Software | Automation: Build-Essentials. Flagged for installation. [ INFO ] DietPi-Software | Automation: Git Client. Flagged for installation. [ INFO ] DietPi-Software | Automation: MATE. Flagged for installation. [ INFO ] DietPi-Software | Automation: RPi.GPIO. Flagged for installation. [ INFO ] DietPi-Software | Automation: DietPi-Ramlog. Flagged for installation. [ INFO ] DietPi-Software | Automation: OpenSSH Server. Flagged for installation. [ INFO ] DietPi-Software | Automation: NTP. Flagged for installation. [ INFO ] DietPi-Software | Automation: Chromium. Flagged for installation. [ INFO ] DietPi-Software | Automation: RealVNC Server. Flagged for installation. [ SUB1 ] DietPi-Set_Hardware > preferipversion (ipv4) [ OK ] preferipversion ipv4 | Completed [ INFO ] DietPi-Drive_Manager | Detecting drives, please wait... [ INFO ] DietPi-Drive_Manager | Detected PARTUUID mount: /dev/mmcblk0p1 > /boot [ INFO ] DietPi-Drive_Manager | Detected PARTUUID mount: /dev/mmcblk0p2 > / [ INFO ] DietPi-Drive_Manager | Processing drive information, please wait... [ INFO ] DietPi-Drive_Manager | Checking available free space on RootFS, please wait... [ OK ] DietPi-Drive_Manager | 3057 MB available, 500 MB required DietPi-Software | (1/5) Testing connection to ftp://mirror.netcologne.de/raspbian/raspbian/, please wait... [. ] [.. ] [ OK ] DietPi-Software | Connection test: ftp://mirror.netcologne.de/raspbian/raspbian/ [ OK ] NTPD: time sync | Completed [ SUB1 ] DietPi-Services > unmask [ OK ] DietPi-Services | unmask all: cron DietPi-Services | cron [. ] [ OK ] DietPi-Services | start : cron [ SUB2 ] DietPi-Process_tool > Apply [ OK ] DietPi-Process_tool | Completed [ SUB1 ] DietPi-Services > stop DietPi-Services | cron [. ] [ OK ] DietPi-Services | stop : cron DietPi-Swapfile | swapoff -a [. ] [ OK ] DietPi-Swapfile | swapoff -a [ INFO ] DietPi-Swapfile | Deleting existing swapfile (/var/swap) [ SUB1 ] DietPi-Swapfile > Generating new swapfile [ INFO ] DietPi-Swapfile | Size = 500 MB [ INFO ] DietPi-Swapfile | Location = /var/swap DietPi-Swapfile | fallocate -l 500M /var/swap [. ] [ OK ] DietPi-Swapfile | fallocate -l 500M /var/swap DietPi-Swapfile | mkswap /var/swap [. ] [ OK ] DietPi-Swapfile | mkswap /var/swap DietPi-Swapfile | swapon /var/swap [. ] [ OK ] DietPi-Swapfile | swapon /var/swap [ INFO ] DietPi-Swapfile | Setting /tmp tmpfs size: 737M DietPi-Swapfile | mount -o remount,size=737M tmpfs /tmp [. ] [ OK ] DietPi-Swapfile | mount -o remount,size=737M tmpfs /tmp DietPi-Software ───────────────────────────────────────────────────── Mode: Update & upgrade APT [ OK ] DietPi-Software | APT update, please wait... Hit:1 ftp://mirror.netcologne.de/raspbian/raspbian stretch InRelease Hit:2 https://archive.raspberrypi.org/debian stretch InRelease Reading package lists... [ OK ] DietPi-Software | G_AGUP [ INFO ] DietPi-Software | Running apt simulation to check for errors, please wait... [ OK ] DietPi-Software | APT installation for: bash-doc -s, please wait... Inst bash-doc (4.4-5 Raspbian:stable [all]) Conf bash-doc (4.4-5 Raspbian:stable [all]) [ OK ] DietPi-Software | G_AGI: bash-doc -s ─────────────────────────────────────── DietPi | 10:51 | Fri 11/05/18 ─────────────────────────────────────── v6.7 | RPi 3 Model B (armv7l) ─────────────────────────────────────── wlan0 | 192.168.14.156 ─────────────────────────────────────── Welcome to DietPi-Software DietPi-Software ───────────────────────────────────────────────────── Mode: Update & upgrade APT [ OK ] DietPi-Software | APT upgrade, please wait... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. [ OK ] DietPi-Software | G_AGUG DietPi-Software | mkdir -p /var/lib/dietpi/dietpi-software/services [. ] [ OK ] DietPi-Software | mkdir -p /var/lib/dietpi/dietpi-software/services DietPi-Software | chmod -R +x /var/lib/dietpi/dietpi-software/services [. ] [ OK ] DietPi-Software | chmod -R +x /var/lib/dietpi/dietpi-software/services DietPi-Software ───────────────────────────────────────────────────── Mode: Stopping SSH servers DietPi-Software ───────────────────────────────────────────────────── Mode: Checking for prerequisite software [ INFO ] DietPi-Software | Alsa will be installed [ INFO ] DietPi-Software | Xserver will be installed [ SUB1 ] DietPi-Services > stop DietPi-Services | cron [. ] [ OK ] DietPi-Services | stop : cron DietPi-Software ───────────────────────────────────────────────────── Mode: Installing ALSA: linux sound system [ OK ] DietPi-Software | APT installation for: alsa-utils, please wait... Selecting previously unselected package libsamplerate0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16886 files and directories currently installed.) Preparing to unpack .../0-libsamplerate0_0.1.8-8_armhf.deb ... Unpacking libsamplerate0:armhf (0.1.8-8) ... Selecting previously unselected package libasound2-data. Preparing to unpack .../1-libasound2-data_1.1.3-5+rpi3_all.deb ... Unpacking libasound2-data (1.1.3-5+rpi3) ... Selecting previously unselected package libasound2:armhf. Preparing to unpack .../2-libasound2_1.1.3-5+rpi3_armhf.deb ... Unpacking libasound2:armhf (1.1.3-5+rpi3) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../3-libgomp1_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libgomp1:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package libfftw3-single3:armhf. Preparing to unpack .../4-libfftw3-single3_3.3.5-3_armhf.deb ... Unpacking libfftw3-single3:armhf (3.3.5-3) ... Selecting previously unselected package alsa-utils. Preparing to unpack .../5-alsa-utils_1.1.3-1_armhf.deb ... Unpacking alsa-utils (1.1.3-1) ... Setting up libgomp1:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up libasound2-data (1.1.3-5+rpi3) ... Setting up libasound2:armhf (1.1.3-5+rpi3) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u2) ... Setting up libfftw3-single3:armhf (3.3.5-3) ... Setting up libsamplerate0:armhf (0.1.8-8) ... Setting up alsa-utils (1.1.3-1) ... alsa-restore.service is a disabled or a static unit, not starting it. alsa-state.service is a disabled or a static unit, not starting it. Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u2) ... [ OK ] DietPi-Software | G_AGI: alsa-utils [ SUB1 ] DietPi-Set_Hardware > soundcard (rpi-bcm2835-ultrahq) [ OK ] soundcard rpi-bcm2835-ultrahq | Completed DietPi-Software ───────────────────────────────────────────────────── Mode: Installing Xserver: linux display system [ OK ] DietPi-Software | APT installation for: xcompmgr xterm xinit xauth xserver-xorg dbus-x11 xfonts-base x11-xserver-utils x11-common x11-utils libgl1-mesa-dri libgles2-mesa mesa-utils, please wait... Extracting templates from packages: 28% Extracting templates from packages: 57% Extracting templates from packages: 85% Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package libmtdev1:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 17169 files and directories currently installed.) Preparing to unpack .../000-libmtdev1_1.1.5-1_armhf.deb ... Unpacking libmtdev1:armhf (1.1.5-1) ... Selecting previously unselected package libxau6:armhf. Preparing to unpack .../001-libxau6_1%3a1.0.8-1_armhf.deb ... Unpacking libxau6:armhf (1:1.0.8-1) ... Selecting previously unselected package libxdmcp6:armhf. Preparing to unpack .../002-libxdmcp6_1%3a1.1.2-3_armhf.deb ... Unpacking libxdmcp6:armhf (1:1.1.2-3) ... Selecting previously unselected package libxcb1:armhf. Preparing to unpack .../003-libxcb1_1.12-1_armhf.deb ... Unpacking libxcb1:armhf (1.12-1) ... Selecting previously unselected package libx11-data. Preparing to unpack .../004-libx11-data_2%3a1.6.4-3_all.deb ... Unpacking libx11-data (2:1.6.4-3) ... Selecting previously unselected package libx11-6:armhf. Preparing to unpack .../005-libx11-6_2%3a1.6.4-3_armhf.deb ... Unpacking libx11-6:armhf (2:1.6.4-3) ... Selecting previously unselected package libxext6:armhf. Preparing to unpack .../006-libxext6_2%3a1.3.3-1_armhf.deb ... Unpacking libxext6:armhf (2:1.3.3-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../007-libexpat1_2.2.0-2+deb9u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.0-2+deb9u1) ... Selecting previously unselected package libfreetype6:armhf. Preparing to unpack .../008-libfreetype6_2.6.3-3.2_armhf.deb ... Unpacking libfreetype6:armhf (2.6.3-3.2) ... Selecting previously unselected package ucf. Preparing to unpack .../009-ucf_3.0036_all.deb ... Moving old data out of the way Unpacking ucf (3.0036) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../010-fonts-dejavu-core_2.37-1_all.deb ... Unpacking fonts-dejavu-core (2.37-1) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../011-fontconfig-config_2.11.0-6.7_all.deb ... Unpacking fontconfig-config (2.11.0-6.7) ... Selecting previously unselected package libfontconfig1:armhf. Preparing to unpack .../012-libfontconfig1_2.11.0-6.7_armhf.deb ... Unpacking libfontconfig1:armhf (2.11.0-6.7) ... Selecting previously unselected package libxrender1:armhf. Preparing to unpack .../013-libxrender1_1%3a0.9.10-1_armhf.deb ... Unpacking libxrender1:armhf (1:0.9.10-1) ... Selecting previously unselected package libxft2:armhf. Preparing to unpack .../014-libxft2_2.3.2-1_armhf.deb ... Unpacking libxft2:armhf (2.3.2-1) ... Selecting previously unselected package libxxf86dga1:armhf. Preparing to unpack .../015-libxxf86dga1_2%3a1.1.4-1_armhf.deb ... Unpacking libxxf86dga1:armhf (2:1.1.4-1) ... Selecting previously unselected package libxxf86vm1:armhf. Preparing to unpack .../016-libxxf86vm1_1%3a1.1.4-1_armhf.deb ... Unpacking libxxf86vm1:armhf (1:1.1.4-1) ... Selecting previously unselected package libmpfr4:armhf. Preparing to unpack .../017-libmpfr4_3.1.5-1_armhf.deb ... Unpacking libmpfr4:armhf (3.1.5-1) ... Selecting previously unselected package libmpc3:armhf. Preparing to unpack .../018-libmpc3_1.0.3-1_armhf.deb ... Unpacking libmpc3:armhf (1.0.3-1) ... Selecting previously unselected package dbus. Preparing to unpack .../019-dbus_1.10.26-0+deb9u1_armhf.deb ... Unpacking dbus (1.10.26-0+deb9u1) ... Selecting previously unselected package libisl15:armhf. Preparing to unpack .../020-libisl15_0.18-1_armhf.deb ... Unpacking libisl15:armhf (0.18-1) ... Selecting previously unselected package cpp-6. Preparing to unpack .../021-cpp-6_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking cpp-6 (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package cpp. Preparing to unpack .../022-cpp_4%3a6.3.0-4_armhf.deb ... Unpacking cpp (4:6.3.0-4) ... Selecting previously unselected package dbus-x11. Preparing to unpack .../023-dbus-x11_1.10.26-0+deb9u1_armhf.deb ... Unpacking dbus-x11 (1.10.26-0+deb9u1) ... Selecting previously unselected package libdrm-amdgpu1:armhf. Preparing to unpack .../024-libdrm-amdgpu1_2.4.74-1_armhf.deb ... Unpacking libdrm-amdgpu1:armhf (2.4.74-1) ... Selecting previously unselected package libdrm-freedreno1:armhf. Preparing to unpack .../025-libdrm-freedreno1_2.4.74-1_armhf.deb ... Unpacking libdrm-freedreno1:armhf (2.4.74-1) ... Selecting previously unselected package libdrm-nouveau2:armhf. Preparing to unpack .../026-libdrm-nouveau2_2.4.74-1_armhf.deb ... Unpacking libdrm-nouveau2:armhf (2.4.74-1) ... Selecting previously unselected package libdrm-radeon1:armhf. Preparing to unpack .../027-libdrm-radeon1_2.4.74-1_armhf.deb ... Unpacking libdrm-radeon1:armhf (2.4.74-1) ... Selecting previously unselected package libwayland-client0:armhf. Preparing to unpack .../028-libwayland-client0_1.12.0-1_armhf.deb ... Unpacking libwayland-client0:armhf (1.12.0-1) ... Selecting previously unselected package libwayland-server0:armhf. Preparing to unpack .../029-libwayland-server0_1.12.0-1_armhf.deb ... Unpacking libwayland-server0:armhf (1.12.0-1) ... Selecting previously unselected package libgbm1:armhf. Preparing to unpack .../030-libgbm1_13.0.6-1+rpi2_armhf.deb ... Unpacking libgbm1:armhf (13.0.6-1+rpi2) ... Selecting previously unselected package libx11-xcb1:armhf. Preparing to unpack .../031-libx11-xcb1_2%3a1.6.4-3_armhf.deb ... Unpacking libx11-xcb1:armhf (2:1.6.4-3) ... Selecting previously unselected package libxcb-dri2-0:armhf. Preparing to unpack .../032-libxcb-dri2-0_1.12-1_armhf.deb ... Unpacking libxcb-dri2-0:armhf (1.12-1) ... Selecting previously unselected package libxcb-dri3-0:armhf. Preparing to unpack .../033-libxcb-dri3-0_1.12-1_armhf.deb ... Unpacking libxcb-dri3-0:armhf (1.12-1) ... Selecting previously unselected package libxcb-present0:armhf. Preparing to unpack .../034-libxcb-present0_1.12-1_armhf.deb ... Unpacking libxcb-present0:armhf (1.12-1) ... Selecting previously unselected package libxcb-sync1:armhf. Preparing to unpack .../035-libxcb-sync1_1.12-1_armhf.deb ... Unpacking libxcb-sync1:armhf (1.12-1) ... Selecting previously unselected package libxcb-xfixes0:armhf. Preparing to unpack .../036-libxcb-xfixes0_1.12-1_armhf.deb ... Unpacking libxcb-xfixes0:armhf (1.12-1) ... Selecting previously unselected package libxshmfence1:armhf. Preparing to unpack .../037-libxshmfence1_1.2-1_armhf.deb ... Unpacking libxshmfence1:armhf (1.2-1) ... Selecting previously unselected package libegl1-mesa:armhf. Preparing to unpack .../038-libegl1-mesa_13.0.6-1+rpi2_armhf.deb ... Unpacking libegl1-mesa:armhf (13.0.6-1+rpi2) ... Selecting previously unselected package libepoxy0:armhf. Preparing to unpack .../039-libepoxy0_1.3.1-2_armhf.deb ... Unpacking libepoxy0:armhf (1.3.1-2) ... Selecting previously unselected package libevdev2:armhf. Preparing to unpack .../040-libevdev2_1.5.6+dfsg-1_armhf.deb ... Unpacking libevdev2:armhf (1.5.6+dfsg-1) ... Selecting previously unselected package libfontenc1:armhf. Preparing to unpack .../041-libfontenc1_1%3a1.1.3-1_armhf.deb ... Unpacking libfontenc1:armhf (1:1.1.3-1) ... Selecting previously unselected package libllvm3.9:armhf. Preparing to unpack .../042-libllvm3.9_1%3a3.9.1-9+rpi1_armhf.deb ... Unpacking libllvm3.9:armhf (1:3.9.1-9+rpi1) ... Selecting previously unselected package libsensors4:armhf. Preparing to unpack .../043-libsensors4_1%3a3.4.0-4_armhf.deb ... Unpacking libsensors4:armhf (1:3.4.0-4) ... Selecting previously unselected package libgl1-mesa-dri:armhf. Preparing to unpack .../044-libgl1-mesa-dri_13.0.6-1+rpi2_armhf.deb ... Unpacking libgl1-mesa-dri:armhf (13.0.6-1+rpi2) ... Selecting previously unselected package libglapi-mesa:armhf. Preparing to unpack .../045-libglapi-mesa_13.0.6-1+rpi2_armhf.deb ... Unpacking libglapi-mesa:armhf (13.0.6-1+rpi2) ... Selecting previously unselected package libxcb-glx0:armhf. Preparing to unpack .../046-libxcb-glx0_1.12-1_armhf.deb ... Unpacking libxcb-glx0:armhf (1.12-1) ... Selecting previously unselected package libxfixes3:armhf. Preparing to unpack .../047-libxfixes3_1%3a5.0.3-1_armhf.deb ... Unpacking libxfixes3:armhf (1:5.0.3-1) ... Selecting previously unselected package libxdamage1:armhf. Preparing to unpack .../048-libxdamage1_1%3a1.1.4-2+b1_armhf.deb ... Unpacking libxdamage1:armhf (1:1.1.4-2+b1) ... Selecting previously unselected package libgl1-mesa-glx:armhf. Preparing to unpack .../049-libgl1-mesa-glx_13.0.6-1+rpi2_armhf.deb ... Unpacking libgl1-mesa-glx:armhf (13.0.6-1+rpi2) ... Selecting previously unselected package libgles2-mesa:armhf. Preparing to unpack .../050-libgles2-mesa_13.0.6-1+rpi2_armhf.deb ... Unpacking libgles2-mesa:armhf (13.0.6-1+rpi2) ... Selecting previously unselected package libglew2.0:armhf. Preparing to unpack .../051-libglew2.0_2.0.0-3_armhf.deb ... Unpacking libglew2.0:armhf (2.0.0-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../052-libglib2.0-0_2.50.3-2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.50.3-2) ... Selecting previously unselected package libglu1-mesa:armhf. Preparing to unpack .../053-libglu1-mesa_9.0.0-2.1_armhf.deb ... Unpacking libglu1-mesa:armhf (9.0.0-2.1) ... Selecting previously unselected package libgudev-1.0-0:armhf. Preparing to unpack .../054-libgudev-1.0-0_230-3_armhf.deb ... Unpacking libgudev-1.0-0:armhf (230-3) ... Selecting previously unselected package x11-common. Preparing to unpack .../055-x11-common_1%3a7.7+19_all.deb ... Unpacking x11-common (1:7.7+19) ... Selecting previously unselected package libice6:armhf. Preparing to unpack .../056-libice6_2%3a1.0.9-2_armhf.deb ... Unpacking libice6:armhf (2:1.0.9-2) ... Selecting previously unselected package libwacom-common. Preparing to unpack .../057-libwacom-common_0.22-1_all.deb ... Unpacking libwacom-common (0.22-1) ... Selecting previously unselected package libwacom2:armhf. Preparing to unpack .../058-libwacom2_0.22-1_armhf.deb ... Unpacking libwacom2:armhf (0.22-1) ... Selecting previously unselected package libinput-bin. Preparing to unpack .../059-libinput-bin_1.6.3-1_armhf.deb ... Unpacking libinput-bin (1.6.3-1) ... Selecting previously unselected package libinput10:armhf. Preparing to unpack .../060-libinput10_1.6.3-1_armhf.deb ... Unpacking libinput10:armhf (1.6.3-1) ... Selecting previously unselected package libpciaccess0:armhf. Preparing to unpack .../061-libpciaccess0_0.13.4-1_armhf.deb ... Unpacking libpciaccess0:armhf (0.13.4-1) ... Selecting previously unselected package libpixman-1-0:armhf. Preparing to unpack .../062-libpixman-1-0_0.34.0-1_armhf.deb ... Unpacking libpixman-1-0:armhf (0.34.0-1) ... Selecting previously unselected package libsm6:armhf. Preparing to unpack .../063-libsm6_2%3a1.2.2-1+b1_armhf.deb ... Unpacking libsm6:armhf (2:1.2.2-1+b1) ... Selecting previously unselected package libutempter0:armhf. Preparing to unpack .../064-libutempter0_1.1.6-3_armhf.deb ... Unpacking libutempter0:armhf (1.1.6-3) ... Selecting previously unselected package libxt6:armhf. Preparing to unpack .../065-libxt6_1%3a1.1.5-1_armhf.deb ... Unpacking libxt6:armhf (1:1.1.5-1) ... Selecting previously unselected package libxmu6:armhf. Preparing to unpack .../066-libxmu6_2%3a1.1.2-2_armhf.deb ... Unpacking libxmu6:armhf (2:1.1.2-2) ... Selecting previously unselected package libxpm4:armhf. Preparing to unpack .../067-libxpm4_1%3a3.5.12-1_armhf.deb ... Unpacking libxpm4:armhf (1:3.5.12-1) ... Selecting previously unselected package libxaw7:armhf. Preparing to unpack .../068-libxaw7_2%3a1.0.13-1_armhf.deb ... Unpacking libxaw7:armhf (2:1.0.13-1) ... Selecting previously unselected package libxcb-shape0:armhf. Preparing to unpack .../069-libxcb-shape0_1.12-1_armhf.deb ... Unpacking libxcb-shape0:armhf (1.12-1) ... Selecting previously unselected package libxcomposite1:armhf. Preparing to unpack .../070-libxcomposite1_1%3a0.4.4-2_armhf.deb ... Unpacking libxcomposite1:armhf (1:0.4.4-2) ... Selecting previously unselected package libxcursor1:armhf. Preparing to unpack .../071-libxcursor1_1%3a1.1.14-1+deb9u1_armhf.deb ... Unpacking libxcursor1:armhf (1:1.1.14-1+deb9u1) ... Selecting previously unselected package libxfont1:armhf. Preparing to unpack .../072-libxfont1_1%3a1.5.2-4_armhf.deb ... Unpacking libxfont1:armhf (1:1.5.2-4) ... Selecting previously unselected package libxfont2:armhf. Preparing to unpack .../073-libxfont2_1%3a2.0.1-3+deb9u1_armhf.deb ... Unpacking libxfont2:armhf (1:2.0.1-3+deb9u1) ... Selecting previously unselected package libxi6:armhf. Preparing to unpack .../074-libxi6_2%3a1.7.9-1_armhf.deb ... Unpacking libxi6:armhf (2:1.7.9-1) ... Selecting previously unselected package libxinerama1:armhf. Preparing to unpack .../075-libxinerama1_2%3a1.1.3-1+b1_armhf.deb ... Unpacking libxinerama1:armhf (2:1.1.3-1+b1) ... Selecting previously unselected package libxkbfile1:armhf. Preparing to unpack .../076-libxkbfile1_1%3a1.0.9-2_armhf.deb ... Unpacking libxkbfile1:armhf (1:1.0.9-2) ... Selecting previously unselected package libxmuu1:armhf. Preparing to unpack .../077-libxmuu1_2%3a1.1.2-2_armhf.deb ... Unpacking libxmuu1:armhf (2:1.1.2-2) ... Selecting previously unselected package libxrandr2:armhf. Preparing to unpack .../078-libxrandr2_2%3a1.5.1-1_armhf.deb ... Unpacking libxrandr2:armhf (2:1.5.1-1) ... Selecting previously unselected package libxtst6:armhf. Preparing to unpack .../079-libxtst6_2%3a1.2.3-1_armhf.deb ... Unpacking libxtst6:armhf (2:1.2.3-1) ... Selecting previously unselected package libxv1:armhf. Preparing to unpack .../080-libxv1_2%3a1.0.11-1_armhf.deb ... Unpacking libxv1:armhf (2:1.0.11-1) ... Selecting previously unselected package mesa-utils. Preparing to unpack .../081-mesa-utils_8.3.0-3_armhf.deb ... Unpacking mesa-utils (8.3.0-3) ... Selecting previously unselected package x11-utils. Preparing to unpack .../082-x11-utils_7.7+3_armhf.deb ... Unpacking x11-utils (7.7+3) ... Selecting previously unselected package x11-xkb-utils. Preparing to unpack .../083-x11-xkb-utils_7.7+3_armhf.deb ... Unpacking x11-xkb-utils (7.7+3) ... Selecting previously unselected package x11-xserver-utils. Preparing to unpack .../084-x11-xserver-utils_7.7+7_armhf.deb ... Unpacking x11-xserver-utils (7.7+7) ... Selecting previously unselected package xauth. Preparing to unpack .../085-xauth_1%3a1.0.9-1_armhf.deb ... Unpacking xauth (1:1.0.9-1) ... Selecting previously unselected package xbitmaps. Preparing to unpack .../086-xbitmaps_1.1.1-2_all.deb ... Unpacking xbitmaps (1.1.1-2) ... Selecting previously unselected package xcompmgr. Preparing to unpack .../087-xcompmgr_1.1.7-1_armhf.deb ... Unpacking xcompmgr (1.1.7-1) ... Selecting previously unselected package xfonts-encodings. Preparing to unpack .../088-xfonts-encodings_1%3a1.0.4-2_all.deb ... Unpacking xfonts-encodings (1:1.0.4-2) ... Selecting previously unselected package xfonts-utils. Preparing to unpack .../089-xfonts-utils_1%3a7.7+4_armhf.deb ... Unpacking xfonts-utils (1:7.7+4) ... Selecting previously unselected package xfonts-base. Preparing to unpack .../090-xfonts-base_1%3a1.0.4+nmu1_all.deb ... Unpacking xfonts-base (1:1.0.4+nmu1) ... Selecting previously unselected package xinit. Preparing to unpack .../091-xinit_1.3.4-3_armhf.deb ... Unpacking xinit (1.3.4-3) ... Selecting previously unselected package xserver-common. Preparing to unpack .../092-xserver-common_2%3a1.19.2-1+rpt1+deb9u2_all.deb ... Unpacking xserver-common (2:1.19.2-1+rpt1+deb9u2) ... Selecting previously unselected package xserver-xorg-core. Preparing to unpack .../093-xserver-xorg-core_2%3a1.19.2-1+rpt1+deb9u2_armhf.deb ... Unpacking xserver-xorg-core (2:1.19.2-1+rpt1+deb9u2) ... Selecting previously unselected package xserver-xorg-video-amdgpu. Preparing to unpack .../094-xserver-xorg-video-amdgpu_1.2.0-1+b1_armhf.deb ... Unpacking xserver-xorg-video-amdgpu (1.2.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-radeon. Preparing to unpack .../095-xserver-xorg-video-radeon_1%3a7.8.0-1+b1_armhf.deb ... Unpacking xserver-xorg-video-radeon (1:7.8.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-ati. Preparing to unpack .../096-xserver-xorg-video-ati_1%3a7.8.0-1+b1_armhf.deb ... Unpacking xserver-xorg-video-ati (1:7.8.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-fbdev. Preparing to unpack .../097-xserver-xorg-video-fbdev_1%3a0.4.4-1+rvt+b1_armhf.deb ... Unpacking xserver-xorg-video-fbdev (1:0.4.4-1+rvt+b1) ... Selecting previously unselected package xserver-xorg-video-nouveau. Preparing to unpack .../098-xserver-xorg-video-nouveau_1%3a1.0.13-3_armhf.deb ... Unpacking xserver-xorg-video-nouveau (1:1.0.13-3) ... Selecting previously unselected package xserver-xorg-video-vesa. Preparing to unpack .../099-xserver-xorg-video-vesa_1%3a2.3.4-1+b3_armhf.deb ... Unpacking xserver-xorg-video-vesa (1:2.3.4-1+b3) ... Selecting previously unselected package xserver-xorg-video-all. Preparing to unpack .../100-xserver-xorg-video-all_1%3a7.7+19_armhf.deb ... Unpacking xserver-xorg-video-all (1:7.7+19) ... Selecting previously unselected package xserver-xorg-input-libinput. Preparing to unpack .../101-xserver-xorg-input-libinput_0.23.0-2_armhf.deb ... Unpacking xserver-xorg-input-libinput (0.23.0-2) ... Selecting previously unselected package xserver-xorg-input-all. Preparing to unpack .../102-xserver-xorg-input-all_1%3a7.7+19_armhf.deb ... Unpacking xserver-xorg-input-all (1:7.7+19) ... Selecting previously unselected package xserver-xorg. Preparing to unpack .../103-xserver-xorg_1%3a7.7+19_armhf.deb ... Unpacking xserver-xorg (1:7.7+19) ... Selecting previously unselected package xterm. Preparing to unpack .../104-xterm_327-2_armhf.deb ... Unpacking xterm (327-2) ... Setting up libexpat1:armhf (2.2.0-2+deb9u1) ... Setting up libwacom-common (0.22-1) ... Setting up libdrm-amdgpu1:armhf (2.4.74-1) ... Setting up libevdev2:armhf (1.5.6+dfsg-1) ... Setting up libdrm-freedreno1:armhf (2.4.74-1) ... Setting up fonts-dejavu-core (2.37-1) ... Setting up xbitmaps (1.1.1-2) ... Setting up libglib2.0-0:armhf (2.50.3-2) ... No schema files found: doing nothing. Setting up libxshmfence1:armhf (1.2-1) ... Setting up libllvm3.9:armhf (1:3.9.1-9+rpi1) ... Setting up libwayland-client0:armhf (1.12.0-1) ... Setting up libglapi-mesa:armhf (13.0.6-1+rpi2) ... Setting up ucf (3.0036) ... Setting up libutempter0:armhf (1.1.6-3) ... Setting up libfreetype6:armhf (2.6.3-3.2) ... Setting up libisl15:armhf (0.18-1) ... Setting up libx11-xcb1:armhf (2:1.6.4-3) ... Setting up libpixman-1-0:armhf (0.34.0-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up libepoxy0:armhf (1.3.1-2) ... Processing triggers for udev (232-25+deb9u2) ... Processing triggers for systemd (232-25+deb9u2) ... Setting up libmtdev1:armhf (1.1.5-1) ... Setting up libfontenc1:armhf (1:1.1.3-1) ... Setting up libmpfr4:armhf (3.1.5-1) ... Setting up libpciaccess0:armhf (0.13.4-1) ... Setting up libsensors4:armhf (1:3.4.0-4) ... Setting up libgudev-1.0-0:armhf (230-3) ... Setting up libmpc3:armhf (1.0.3-1) ... Setting up cpp-6 (6.3.0-18+rpi1+deb9u1) ... Setting up libdrm-radeon1:armhf (2.4.74-1) ... Setting up libxdmcp6:armhf (1:1.1.2-3) ... Setting up dbus (1.10.26-0+deb9u1) ... Setting up libdrm-nouveau2:armhf (2.4.74-1) ... Setting up x11-common (1:7.7+19) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Setting up libgles2-mesa:armhf (13.0.6-1+rpi2) ... Setting up libx11-data (2:1.6.4-3) ... Setting up libxau6:armhf (1:1.0.8-1) ... Setting up libwayland-server0:armhf (1.12.0-1) ... Setting up cpp (4:6.3.0-4) ... Setting up fontconfig-config (2.11.0-6.7) ... Setting up libwacom2:armhf (0.22-1) ... Setting up libgbm1:armhf (13.0.6-1+rpi2) ... Setting up libgl1-mesa-dri:armhf (13.0.6-1+rpi2) ... Setting up libxfont2:armhf (1:2.0.1-3+deb9u1) ... Setting up libinput-bin (1.6.3-1) ... Setting up xfonts-encodings (1:1.0.4-2) ... Setting up libxfont1:armhf (1:1.5.2-4) ... Setting up libice6:armhf (2:1.0.9-2) ... Setting up libxcb1:armhf (1.12-1) ... Setting up libxcb-present0:armhf (1.12-1) ... Setting up libfontconfig1:armhf (2.11.0-6.7) ... Setting up libxcb-dri2-0:armhf (1.12-1) ... Setting up libsm6:armhf (2:1.2.2-1+b1) ... Setting up libxcb-dri3-0:armhf (1.12-1) ... Setting up libxcb-glx0:armhf (1.12-1) ... Setting up libxcb-xfixes0:armhf (1.12-1) ... Setting up libx11-6:armhf (2:1.6.4-3) ... Setting up libinput10:armhf (1.6.3-1) ... Setting up dbus-x11 (1.10.26-0+deb9u1) ... Setting up xfonts-utils (1:7.7+4) ... Setting up libxmuu1:armhf (2:1.1.2-2) ... Setting up libxcb-sync1:armhf (1.12-1) ... Setting up libxcomposite1:armhf (1:0.4.4-2) ... Setting up libxpm4:armhf (1:3.5.12-1) ... Setting up libxt6:armhf (1:1.1.5-1) ... Setting up libxcb-shape0:armhf (1.12-1) ... Setting up libxrender1:armhf (1:0.9.10-1) ... Setting up libxft2:armhf (2.3.2-1) ... Setting up xfonts-base (1:1.0.4+nmu1) ... Setting up libegl1-mesa:armhf (13.0.6-1+rpi2) ... Setting up libxkbfile1:armhf (1:1.0.9-2) ... Setting up libxext6:armhf (2:1.3.3-1) ... Setting up libxfixes3:armhf (1:5.0.3-1) ... Setting up libxmu6:armhf (2:1.1.2-2) ... Setting up xauth (1:1.0.9-1) ... Setting up libxcursor1:armhf (1:1.1.14-1+deb9u1) ... Setting up libxxf86dga1:armhf (2:1.1.4-1) ... Setting up libxv1:armhf (2:1.0.11-1) ... Setting up libxxf86vm1:armhf (1:1.1.4-1) ... Setting up libxrandr2:armhf (2:1.5.1-1) ... Setting up libxi6:armhf (2:1.7.9-1) ... Setting up libxaw7:armhf (2:1.0.13-1) ... Setting up libxinerama1:armhf (2:1.1.3-1+b1) ... Setting up libxdamage1:armhf (1:1.1.4-2+b1) ... Setting up x11-xkb-utils (7.7+3) ... Setting up xinit (1.3.4-3) ... Setting up xterm (327-2) ... update-alternatives: using /usr/bin/xterm to provide /usr/bin/x-terminal-emulator (x-terminal-emulator) in auto mode update-alternatives: using /usr/bin/lxterm to provide /usr/bin/x-terminal-emulator (x-terminal-emulator) in auto mode Setting up libxtst6:armhf (2:1.2.3-1) ... Setting up libgl1-mesa-glx:armhf (13.0.6-1+rpi2) ... Setting up libglew2.0:armhf (2.0.0-3) ... Setting up x11-xserver-utils (7.7+7) ... Setting up libglu1-mesa:armhf (9.0.0-2.1) ... Setting up xcompmgr (1.1.7-1) ... Setting up mesa-utils (8.3.0-3) ... Setting up xserver-common (2:1.19.2-1+rpt1+deb9u2) ... Setting up x11-utils (7.7+3) ... Setting up xserver-xorg-core (2:1.19.2-1+rpt1+deb9u2) ... Setting up xserver-xorg-video-radeon (1:7.8.0-1+b1) ... Setting up xserver-xorg-video-vesa (1:2.3.4-1+b3) ... Setting up xserver-xorg-video-amdgpu (1.2.0-1+b1) ... Setting up xserver-xorg-video-ati (1:7.8.0-1+b1) ... Setting up xserver-xorg-video-nouveau (1:1.0.13-3) ... Setting up xserver-xorg-video-fbdev (1:0.4.4-1+rvt+b1) ... Setting up xserver-xorg-input-libinput (0.23.0-2) ... Setting up xserver-xorg-video-all (1:7.7+19) ... Setting up xserver-xorg (1:7.7+19) ... Setting up xserver-xorg-input-all (1:7.7+19) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u2) ... [ OK ] DietPi-Software | G_AGI: xcompmgr xterm xinit xauth xserver-xorg dbus-x11 xfonts-base x11-xserver-utils x11-common x11-utils libgl1-mesa-dri libgles2-mesa mesa-utils DietPi-Software ───────────────────────────────────────────────────── Mode: Installing Build-Essentials: common packages for compile [ OK ] DietPi-Software | APT installation for: build-essential make autoconf automake, please wait... Selecting previously unselected package perl-modules-5.24. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19286 files and directories currently installed.) Preparing to unpack .../00-perl-modules-5.24_5.24.1-3+deb9u3_all.deb ... Unpacking perl-modules-5.24 (5.24.1-3+deb9u3) ... Selecting previously unselected package libgdbm3:armhf. Preparing to unpack .../01-libgdbm3_1.8.3-14_armhf.deb ... Unpacking libgdbm3:armhf (1.8.3-14) ... Selecting previously unselected package libperl5.24:armhf. Preparing to unpack .../02-libperl5.24_5.24.1-3+deb9u3_armhf.deb ... Unpacking libperl5.24:armhf (5.24.1-3+deb9u3) ... Selecting previously unselected package perl. Preparing to unpack .../03-perl_5.24.1-3+deb9u3_armhf.deb ... Unpacking perl (5.24.1-3+deb9u3) ... Selecting previously unselected package patch. Preparing to unpack .../04-patch_2.7.5-1_armhf.deb ... Unpacking patch (2.7.5-1) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../05-libsigsegv2_2.10-5_armhf.deb ... Unpacking libsigsegv2:armhf (2.10-5) ... Selecting previously unselected package m4. Preparing to unpack .../06-m4_1.4.18-1_armhf.deb ... Unpacking m4 (1.4.18-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../07-autoconf_2.69-10_all.deb ... Unpacking autoconf (2.69-10) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../08-autotools-dev_20161112.1_all.deb ... Unpacking autotools-dev (20161112.1) ... Selecting previously unselected package automake. Preparing to unpack .../09-automake_1%3a1.15-6_all.deb ... Unpacking automake (1:1.15-6) ... Selecting previously unselected package binutils. Preparing to unpack .../10-binutils_2.28-5_armhf.deb ... Unpacking binutils (2.28-5) ... Selecting previously unselected package libc-dev-bin. Preparing to unpack .../11-libc-dev-bin_2.24-11+deb9u3_armhf.deb ... Unpacking libc-dev-bin (2.24-11+deb9u3) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../12-linux-libc-dev_4.9.82-1+deb9u3+rpi1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../13-libc6-dev_2.24-11+deb9u3_armhf.deb ... Unpacking libc6-dev:armhf (2.24-11+deb9u3) ... Selecting previously unselected package libcc1-0:armhf. Preparing to unpack .../14-libcc1-0_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libcc1-0:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../15-libatomic1_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libatomic1:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package libasan3:armhf. Preparing to unpack .../16-libasan3_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libasan3:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package libubsan0:armhf. Preparing to unpack .../17-libubsan0_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libubsan0:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package libgcc-6-dev:armhf. Preparing to unpack .../18-libgcc-6-dev_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libgcc-6-dev:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package gcc-6. Preparing to unpack .../19-gcc-6_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking gcc-6 (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package gcc. Preparing to unpack .../20-gcc_4%3a6.3.0-4_armhf.deb ... Unpacking gcc (4:6.3.0-4) ... Selecting previously unselected package libstdc++-6-dev:armhf. Preparing to unpack .../21-libstdc++-6-dev_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking libstdc++-6-dev:armhf (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package g++-6. Preparing to unpack .../22-g++-6_6.3.0-18+rpi1+deb9u1_armhf.deb ... Unpacking g++-6 (6.3.0-18+rpi1+deb9u1) ... Selecting previously unselected package g++. Preparing to unpack .../23-g++_4%3a6.3.0-4_armhf.deb ... Unpacking g++ (4:6.3.0-4) ... Selecting previously unselected package make. Preparing to unpack .../24-make_4.1-9.1_armhf.deb ... Unpacking make (4.1-9.1) ... Selecting previously unselected package libdpkg-perl. Preparing to unpack .../25-libdpkg-perl_1.18.24_all.deb ... Unpacking libdpkg-perl (1.18.24) ... Selecting previously unselected package dpkg-dev. Preparing to unpack .../26-dpkg-dev_1.18.24_all.deb ... Unpacking dpkg-dev (1.18.24) ... Selecting previously unselected package build-essential. Preparing to unpack .../27-build-essential_12.3_armhf.deb ... Unpacking build-essential (12.3) ... Setting up libatomic1:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up perl-modules-5.24 (5.24.1-3+deb9u3) ... Setting up libgdbm3:armhf (1.8.3-14) ... Setting up libperl5.24:armhf (5.24.1-3+deb9u3) ... Setting up libcc1-0:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up make (4.1-9.1) ... Setting up libasan3:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up libsigsegv2:armhf (2.10-5) ... Processing triggers for install-info (6.3.0.dfsg.1-1+b1) ... Setting up libubsan0:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ... Setting up m4 (1.4.18-1) ... Setting up perl (5.24.1-3+deb9u3) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode Setting up patch (2.7.5-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up autotools-dev (20161112.1) ... Setting up binutils (2.28-5) ... Setting up libc-dev-bin (2.24-11+deb9u3) ... Setting up libc6-dev:armhf (2.24-11+deb9u3) ... Setting up libgcc-6-dev:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up libstdc++-6-dev:armhf (6.3.0-18+rpi1+deb9u1) ... Setting up libdpkg-perl (1.18.24) ... Setting up autoconf (2.69-10) ... Setting up gcc-6 (6.3.0-18+rpi1+deb9u1) ... Setting up g++-6 (6.3.0-18+rpi1+deb9u1) ... Setting up dpkg-dev (1.18.24) ... Setting up automake (1:1.15-6) ... update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode Setting up gcc (4:6.3.0-4) ... Setting up g++ (4:6.3.0-4) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode Setting up build-essential (12.3) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... [ OK ] DietPi-Software | G_AGI: build-essential make autoconf automake DietPi-Software ───────────────────────────────────────────────────── Mode: Installing NTP: date and time sync [ OK ] DietPi-Software | APT installation for: ntp, please wait... [ OK ] DietPi-Software | G_AGI: ntp DietPi-Software ───────────────────────────────────────────────────── Mode: Installing Git Client: git clone etc [ OK ] DietPi-Software | APT installation for: git, please wait... Selecting previously unselected package liberror-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 24302 files and directories currently installed.) Preparing to unpack .../liberror-perl_0.17024-1_all.deb ... Unpacking liberror-perl (0.17024-1) ... Selecting previously unselected package git-man. Preparing to unpack .../git-man_1%3a2.11.0-3+deb9u2_all.deb ... Unpacking git-man (1:2.11.0-3+deb9u2) ... Selecting previously unselected package git. Preparing to unpack .../git_1%3a2.11.0-3+deb9u2_armhf.deb ... Unpacking git (1:2.11.0-3+deb9u2) ... Setting up git-man (1:2.11.0-3+deb9u2) ... Setting up liberror-perl (0.17024-1) ... Setting up git (1:2.11.0-3+deb9u2) ... [ OK ] DietPi-Software | G_AGI: git DietPi-Software ───────────────────────────────────────────────────── Mode: Installing OpenSSH Client: [ OK ] DietPi-Software | APT installation for: openssh-client, please wait... Selecting previously unselected package openssh-client. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 25175 files and directories currently installed.) Preparing to unpack .../openssh-client_1%3a7.4p1-10+deb9u3_armhf.deb ... Unpacking openssh-client (1:7.4p1-10+deb9u3) ... Setting up openssh-client (1:7.4p1-10+deb9u3) ... [ OK ] DietPi-Software | G_AGI: openssh-client DietPi-Software ───────────────────────────────────────────────────── Mode: Installing OpenSSH Server: [ OK ] DietPi-Software | APT installation for: openssh-server, please wait... Preconfiguring packages ... Selecting previously unselected package libwrap0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 25229 files and directories currently installed.) Preparing to unpack .../libwrap0_7.6.q-26_armhf.deb ... Unpacking libwrap0:armhf (7.6.q-26) ... Selecting previously unselected package openssh-sftp-server. Preparing to unpack .../openssh-sftp-server_1%3a7.4p1-10+deb9u3_armhf.deb ... Unpacking openssh-sftp-server (1:7.4p1-10+deb9u3) ... Selecting previously unselected package openssh-server. Preparing to unpack .../openssh-server_1%3a7.4p1-10+deb9u3_armhf.deb ... Unpacking openssh-server (1:7.4p1-10+deb9u3) ... Setting up openssh-sftp-server (1:7.4p1-10+deb9u3) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u2) ... Setting up libwrap0:armhf (7.6.q-26) ... Setting up openssh-server (1:7.4p1-10+deb9u3) ... Creating config file /etc/ssh/sshd_config with new version Creating SSH2 RSA key; this may take some time ... 2048 SHA256:9M3Wvvert8dIdVTDNkbsIpFEVh10sDivtofFz3tkTa4 root@JAS-TT (RSA) Creating SSH2 ECDSA key; this may take some time ... 256 SHA256:rWallltpoRSYEKAnFBZHKY0DiPwnqaEJbTJch74Pn8k root@JAS-TT (ECDSA) Creating SSH2 ED25519 key; this may take some time ... 256 SHA256:Y3R/WqHNVGPltgawl02cYPEohxQc0JrfHtYfsR0CwLY root@JAS-TT (ED25519) Created symlink /etc/systemd/system/sshd.service → /lib/systemd/system/ssh.service. Created symlink /etc/systemd/system/multi-user.target.wants/ssh.service → /lib/systemd/system/ssh.service. Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u2) ... [ OK ] DietPi-Software | G_AGI: openssh-server Generating public/private rsa1 key pair. Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: SHA256:QqBS4YHJpGAXaM8eS9D2MyJaRT7CaFTfXgUVTygx7JQ root@JAS-TT The key's randomart image is: +---[RSA 2048]----+ |+*B*+ .+=+o. | |BX.*o.. Eo.o | |=.X.+...o.. . | |.o.B *. .. | |..+ + +.S | |. o . | | | | | | | +----[SHA256]-----+ Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: SHA256:LJVMschqVhLoqvLzYMhRKDPcJbk0yA1tWA+JoA3NZa8 root@JAS-TT The key's randomart image is: +---[DSA 1024]----+ |=+O**. o. | |oB*X=+ + o | |=++o+.= = | |.oo. = o | | o E . S | |o..o . | |o.o | |o... | |...o. | +----[SHA256]-----+ DietPi-Software ───────────────────────────────────────────────────── Mode: Installing DietPi-Ramlog: minimal, optimized logging [ SUB1 ] DietPi-Services > stop DietPi-Services | cron [. ] [ OK ] DietPi-Services | stop : cron DietPi-Software ───────────────────────────────────────────────────── Mode: Installing MATE: desktop enviroment DietPi-Software | (1/5) Testing connection to http://dietpi.com/downloads/conf/desktop, please wait... [. ] [.. ] [ .. ] [ OK ] DietPi-Software | Connection test: http://dietpi.com/downloads/conf/desktop [ OK ] DietPi-Software | APT installation for: mate-desktop-environment-extras upower policykit-1 iceweasel, please wait... Extracting templates from packages: 13% Extracting templates from packages: 26% Extracting templates from packages: 39% Extracting templates from packages: 52% Extracting templates from packages: 65% Extracting templates from packages: 78% Extracting templates from packages: 92% Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package fontconfig. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 25270 files and directories currently installed.) Preparing to unpack .../00-fontconfig_2.11.0-6.7_armhf.deb ... Unpacking fontconfig (2.11.0-6.7) ... Selecting previously unselected package libaspell15:armhf. Preparing to unpack .../01-libaspell15_0.60.7~20110707-3_armhf.deb ... Unpacking libaspell15:armhf (0.60.7~20110707-3) ... Selecting previously unselected package libexif12:armhf. Preparing to unpack .../02-libexif12_0.6.21-2_armhf.deb ... Unpacking libexif12:armhf (0.6.21-2) ... Selecting previously unselected package libjbig0:armhf. Preparing to unpack .../03-libjbig0_2.1-3.1_armhf.deb ... Unpacking libjbig0:armhf (2.1-3.1) ... Selecting previously unselected package liblzo2-2:armhf. Preparing to unpack .../04-liblzo2-2_2.08-1.2_armhf.deb ... Unpacking liblzo2-2:armhf (2.08-1.2) ... Selecting previously unselected package libmtp-common. Preparing to unpack .../05-libmtp-common_1.1.13-1_all.deb ... Unpacking libmtp-common (1.1.13-1) ... Selecting previously unselected package libmtp9:armhf. Preparing to unpack .../06-libmtp9_1.1.13-1_armhf.deb ... Unpacking libmtp9:armhf (1.1.13-1) ... Selecting previously unselected package libogg0:armhf. Preparing to unpack .../07-libogg0_1.3.2-1_armhf.deb ... Unpacking libogg0:armhf (1.3.2-1) ... Selecting previously unselected package libtalloc2:armhf. Preparing to unpack .../08-libtalloc2_2.1.8-1_armhf.deb ... Unpacking libtalloc2:armhf (2.1.8-1) ... Selecting previously unselected package libtevent0:armhf. Preparing to unpack .../09-libtevent0_0.9.31-1_armhf.deb ... Unpacking libtevent0:armhf (0.9.31-1) ... Selecting previously unselected package libavahi-common-data:armhf. Preparing to unpack .../10-libavahi-common-data_0.6.32-2_armhf.deb ... Unpacking libavahi-common-data:armhf (0.6.32-2) ... Selecting previously unselected package libavahi-common3:armhf. Preparing to unpack .../11-libavahi-common3_0.6.32-2_armhf.deb ... Unpacking libavahi-common3:armhf (0.6.32-2) ... Selecting previously unselected package libavahi-client3:armhf. Preparing to unpack .../12-libavahi-client3_0.6.32-2_armhf.deb ... Unpacking libavahi-client3:armhf (0.6.32-2) ... Selecting previously unselected package libcups2:armhf. Preparing to unpack .../13-libcups2_2.2.1-8_armhf.deb ... Unpacking libcups2:armhf (2.2.1-8) ... Selecting previously unselected package libtdb1:armhf. Preparing to unpack .../14-libtdb1_1.3.11-2_armhf.deb ... Unpacking libtdb1:armhf (1.3.11-2) ... Selecting previously unselected package libldb1:armhf. Preparing to unpack .../15-libldb1_2%3a1.1.27-1_armhf.deb ... Unpacking libldb1:armhf (2:1.1.27-1) ... Selecting previously unselected package libpython2.7-minimal:armhf. Preparing to unpack .../16-libpython2.7-minimal_2.7.13-2+deb9u2_armhf.deb ... Unpacking libpython2.7-minimal:armhf (2.7.13-2+deb9u2) ... Selecting previously unselected package mime-support. Preparing to unpack .../17-mime-support_3.60_all.deb ... Unpacking mime-support (3.60) ... Selecting previously unselected package libpython2.7-stdlib:armhf. Preparing to unpack .../18-libpython2.7-stdlib_2.7.13-2+deb9u2_armhf.deb ... Unpacking libpython2.7-stdlib:armhf (2.7.13-2+deb9u2) ... Selecting previously unselected package libpython2.7:armhf. Preparing to unpack .../19-libpython2.7_2.7.13-2+deb9u2_armhf.deb ... Unpacking libpython2.7:armhf (2.7.13-2+deb9u2) ... Selecting previously unselected package libwbclient0:armhf. Preparing to unpack .../20-libwbclient0_2%3a4.5.12+dfsg-2+deb9u2_armhf.deb ... Unpacking libwbclient0:armhf (2:4.5.12+dfsg-2+deb9u2) ... Selecting previously unselected package python2.7-minimal. Preparing to unpack .../21-python2.7-minimal_2.7.13-2+deb9u2_armhf.deb ... Unpacking python2.7-minimal (2.7.13-2+deb9u2) ... Selecting previously unselected package python-minimal. Preparing to unpack .../22-python-minimal_2.7.13-2_armhf.deb ... Unpacking python-minimal (2.7.13-2) ... Selecting previously unselected package python2.7. Preparing to unpack .../23-python2.7_2.7.13-2+deb9u2_armhf.deb ... Unpacking python2.7 (2.7.13-2+deb9u2) ... Selecting previously unselected package libpython-stdlib:armhf. Preparing to unpack .../24-libpython-stdlib_2.7.13-2_armhf.deb ... Unpacking libpython-stdlib:armhf (2.7.13-2) ... Setting up libpython2.7-minimal:armhf (2.7.13-2+deb9u2) ... Setting up python2.7-minimal (2.7.13-2+deb9u2) ... Setting up python-minimal (2.7.13-2) ... Selecting previously unselected package python. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 26389 files and directories currently installed.) Preparing to unpack .../000-python_2.7.13-2_armhf.deb ... Unpacking python (2.7.13-2) ... Selecting previously unselected package python-talloc. Preparing to unpack .../001-python-talloc_2.1.8-1_armhf.deb ... Unpacking python-talloc (2.1.8-1) ... Selecting previously unselected package samba-libs:armhf. Preparing to unpack .../002-samba-libs_2%3a4.5.12+dfsg-2+deb9u2_armhf.deb ... Unpacking samba-libs:armhf (2:4.5.12+dfsg-2+deb9u2) ... Selecting previously unselected package libsmbclient:armhf. Preparing to unpack .../003-libsmbclient_2%3a4.5.12+dfsg-2+deb9u2_armhf.deb ... Unpacking libsmbclient:armhf (2:4.5.12+dfsg-2+deb9u2) ... Selecting previously unselected package libxcb-util0:armhf. Preparing to unpack .../004-libxcb-util0_0.3.8-3_armhf.deb ... Unpacking libxcb-util0:armhf (0.3.8-3) ... Selecting previously unselected package libstartup-notification0:armhf. Preparing to unpack .../005-libstartup-notification0_0.12-4_armhf.deb ... Unpacking libstartup-notification0:armhf (0.12-4) ... Selecting previously unselected package libxres1:armhf. Preparing to unpack .../006-libxres1_2%3a1.0.7-1_armhf.deb ... Unpacking libxres1:armhf (2:1.0.7-1) ... Selecting previously unselected package libxss1:armhf. Preparing to unpack .../007-libxss1_1%3a1.2.2-1_armhf.deb ... Unpacking libxss1:armhf (1:1.2.2-1) ... Selecting previously unselected package libthai-data. Preparing to unpack .../008-libthai-data_0.1.26-1_all.deb ... Unpacking libthai-data (0.1.26-1) ... Selecting previously unselected package libdatrie1:armhf. Preparing to unpack .../009-libdatrie1_0.2.10-4_armhf.deb ... Unpacking libdatrie1:armhf (0.2.10-4) ... Selecting previously unselected package libthai0:armhf. Preparing to unpack .../010-libthai0_0.1.26-1_armhf.deb ... Unpacking libthai0:armhf (0.1.26-1) ... Selecting previously unselected package libpango-1.0-0:armhf. Preparing to unpack .../011-libpango-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpango-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package libpangox-1.0-0:armhf. Preparing to unpack .../012-libpangox-1.0-0_0.0.2-5_armhf.deb ... Unpacking libpangox-1.0-0:armhf (0.0.2-5) ... Selecting previously unselected package libevent-2.0-5:armhf. Preparing to unpack .../013-libevent-2.0-5_2.0.21-stable-3_armhf.deb ... Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ... Selecting previously unselected package libpam-systemd:armhf. Preparing to unpack .../014-libpam-systemd_232-25+deb9u2_armhf.deb ... Unpacking libpam-systemd:armhf (232-25+deb9u2) ... Selecting previously unselected package libicu57:armhf. Preparing to unpack .../015-libicu57_57.1-6+deb9u2_armhf.deb ... Unpacking libicu57:armhf (57.1-6+deb9u2) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../016-libxml2_2.9.4+dfsg1-2.2+deb9u2_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-2.2+deb9u2) ... Selecting previously unselected package libaccountsservice0:armhf. Preparing to unpack .../017-libaccountsservice0_0.6.43-1_armhf.deb ... Unpacking libaccountsservice0:armhf (0.6.43-1) ... Selecting previously unselected package libpolkit-gobject-1-0:armhf. Preparing to unpack .../018-libpolkit-gobject-1-0_0.105-18_armhf.deb ... Unpacking libpolkit-gobject-1-0:armhf (0.105-18) ... Selecting previously unselected package accountsservice. Preparing to unpack .../019-accountsservice_0.6.43-1_armhf.deb ... Unpacking accountsservice (0.6.43-1) ... Selecting previously unselected package hicolor-icon-theme. Preparing to unpack .../020-hicolor-icon-theme_0.15-1_all.deb ... Unpacking hicolor-icon-theme (0.15-1) ... Selecting previously unselected package libjpeg62-turbo:armhf. Preparing to unpack .../021-libjpeg62-turbo_1%3a1.5.1-2_armhf.deb ... Unpacking libjpeg62-turbo:armhf (1:1.5.1-2) ... Selecting previously unselected package libtiff5:armhf. Preparing to unpack .../022-libtiff5_4.0.8-2+deb9u2_armhf.deb ... Unpacking libtiff5:armhf (4.0.8-2+deb9u2) ... Selecting previously unselected package shared-mime-info. Preparing to unpack .../023-shared-mime-info_1.8-1_armhf.deb ... Unpacking shared-mime-info (1.8-1) ... Selecting previously unselected package libgdk-pixbuf2.0-common. Preparing to unpack .../024-libgdk-pixbuf2.0-common_2.36.5-2+deb9u2_all.deb ... Unpacking libgdk-pixbuf2.0-common (2.36.5-2+deb9u2) ... Selecting previously unselected package libgdk-pixbuf2.0-0:armhf. Preparing to unpack .../025-libgdk-pixbuf2.0-0_2.36.5-2+deb9u2_armhf.deb ... Unpacking libgdk-pixbuf2.0-0:armhf (2.36.5-2+deb9u2) ... Selecting previously unselected package gtk-update-icon-cache. Preparing to unpack .../026-gtk-update-icon-cache_3.22.11-1+rpi3_armhf.deb ... No diversion 'diversion of /usr/sbin/update-icon-caches to /usr/sbin/update-icon-caches.gtk2 by libgtk-3-bin', none removed. No diversion 'diversion of /usr/share/man/man8/update-icon-caches.8.gz to /usr/share/man/man8/update-icon-caches.gtk2.8.gz by libgtk-3-bin', none removed. Unpacking gtk-update-icon-cache (3.22.11-1+rpi3) ... Selecting previously unselected package libxcb-render0:armhf. Preparing to unpack .../027-libxcb-render0_1.12-1_armhf.deb ... Unpacking libxcb-render0:armhf (1.12-1) ... Selecting previously unselected package libxcb-shm0:armhf. Preparing to unpack .../028-libxcb-shm0_1.12-1_armhf.deb ... Unpacking libxcb-shm0:armhf (1.12-1) ... Selecting previously unselected package libcairo2:armhf. Preparing to unpack .../029-libcairo2_1.14.8-1+rpi1_armhf.deb ... Unpacking libcairo2:armhf (1.14.8-1+rpi1) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../030-libcroco3_0.6.11-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.11-3) ... Selecting previously unselected package libgraphite2-3:armhf. Preparing to unpack .../031-libgraphite2-3_1.3.10-1_armhf.deb ... Unpacking libgraphite2-3:armhf (1.3.10-1) ... Selecting previously unselected package libharfbuzz0b:armhf. Preparing to unpack .../032-libharfbuzz0b_1.4.2-1_armhf.deb ... Unpacking libharfbuzz0b:armhf (1.4.2-1) ... Selecting previously unselected package libpangoft2-1.0-0:armhf. Preparing to unpack .../033-libpangoft2-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpangoft2-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package libpangocairo-1.0-0:armhf. Preparing to unpack .../034-libpangocairo-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpangocairo-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package librsvg2-2:armhf. Preparing to unpack .../035-librsvg2-2_2.40.16-1_armhf.deb ... Unpacking librsvg2-2:armhf (2.40.16-1) ... Selecting previously unselected package librsvg2-common:armhf. Preparing to unpack .../036-librsvg2-common_2.40.16-1_armhf.deb ... Unpacking librsvg2-common:armhf (2.40.16-1) ... Selecting previously unselected package adwaita-icon-theme. Preparing to unpack .../037-adwaita-icon-theme_3.22.0-1+deb9u1_all.deb ... Unpacking adwaita-icon-theme (3.22.0-1+deb9u1) ... Selecting previously unselected package emacsen-common. Preparing to unpack .../038-emacsen-common_2.0.8_all.deb ... Unpacking emacsen-common (2.0.8) ... Selecting previously unselected package dictionaries-common. Preparing to unpack .../039-dictionaries-common_1.27.2_all.deb ... Adding 'diversion of /usr/share/dict/words to /usr/share/dict/words.pre-dictionaries-common by dictionaries-common' Unpacking dictionaries-common (1.27.2) ... Selecting previously unselected package aspell. Preparing to unpack .../040-aspell_0.60.7~20110707-3_armhf.deb ... Unpacking aspell (0.60.7~20110707-3) ... Selecting previously unselected package aspell-en. Preparing to unpack .../041-aspell-en_2016.11.20-0-0.1_all.deb ... Unpacking aspell-en (2016.11.20-0-0.1) ... Selecting previously unselected package libatspi2.0-0:armhf. Preparing to unpack .../042-libatspi2.0-0_2.22.0-6+deb9u1_armhf.deb ... Unpacking libatspi2.0-0:armhf (2.22.0-6+deb9u1) ... Selecting previously unselected package at-spi2-core. Preparing to unpack .../043-at-spi2-core_2.22.0-6+deb9u1_armhf.deb ... Unpacking at-spi2-core (2.22.0-6+deb9u1) ... Selecting previously unselected package libdconf1:armhf. Preparing to unpack .../044-libdconf1_0.26.0-2_armhf.deb ... Unpacking libdconf1:armhf (0.26.0-2) ... Selecting previously unselected package dconf-service. Preparing to unpack .../045-dconf-service_0.26.0-2_armhf.deb ... Unpacking dconf-service (0.26.0-2) ... Selecting previously unselected package dconf-gsettings-backend:armhf. Preparing to unpack .../046-dconf-gsettings-backend_0.26.0-2_armhf.deb ... Unpacking dconf-gsettings-backend:armhf (0.26.0-2) ... Selecting previously unselected package caja-common. Preparing to unpack .../047-caja-common_1.16.6-1+deb9u1_all.deb ... Unpacking caja-common (1.16.6-1+deb9u1) ... Selecting previously unselected package desktop-file-utils. Preparing to unpack .../048-desktop-file-utils_0.23-1_armhf.deb ... Unpacking desktop-file-utils (0.23-1) ... Selecting previously unselected package libbluray1:armhf. Preparing to unpack .../049-libbluray1_1%3a0.9.3-4_armhf.deb ... Unpacking libbluray1:armhf (1:0.9.3-4) ... Selecting previously unselected package libsecret-common. Preparing to unpack .../050-libsecret-common_0.18.5-3.1_all.deb ... Unpacking libsecret-common (0.18.5-3.1) ... Selecting previously unselected package libsecret-1-0:armhf. Preparing to unpack .../051-libsecret-1-0_0.18.5-3.1_armhf.deb ... Unpacking libsecret-1-0:armhf (0.18.5-3.1) ... Selecting previously unselected package libudisks2-0:armhf. Preparing to unpack .../052-libudisks2-0_2.1.8-1_armhf.deb ... Unpacking libudisks2-0:armhf (2.1.8-1) ... Selecting previously unselected package libatasmart4:armhf. Preparing to unpack .../053-libatasmart4_0.19-4_armhf.deb ... Unpacking libatasmart4:armhf (0.19-4) ... Selecting previously unselected package libpolkit-agent-1-0:armhf. Preparing to unpack .../054-libpolkit-agent-1-0_0.105-18_armhf.deb ... Unpacking libpolkit-agent-1-0:armhf (0.105-18) ... Selecting previously unselected package udisks2. Preparing to unpack .../055-udisks2_2.1.8-1_armhf.deb ... Unpacking udisks2 (2.1.8-1) ... Selecting previously unselected package libgck-1-0:armhf. Preparing to unpack .../056-libgck-1-0_3.20.0-5.1_armhf.deb ... Unpacking libgck-1-0:armhf (3.20.0-5.1) ... Selecting previously unselected package libgcr-3-common. Preparing to unpack .../057-libgcr-3-common_3.20.0-5.1_all.deb ... Unpacking libgcr-3-common (3.20.0-5.1) ... Selecting previously unselected package libgcr-base-3-1:armhf. Preparing to unpack .../058-libgcr-base-3-1_3.20.0-5.1_armhf.deb ... Unpacking libgcr-base-3-1:armhf (3.20.0-5.1) ... Selecting previously unselected package gvfs-common. Preparing to unpack .../059-gvfs-common_1.30.4-1_all.deb ... Unpacking gvfs-common (1.30.4-1) ... Selecting previously unselected package gvfs-libs:armhf. Preparing to unpack .../060-gvfs-libs_1.30.4-1_armhf.deb ... Unpacking gvfs-libs:armhf (1.30.4-1) ... Selecting previously unselected package gvfs-daemons. Preparing to unpack .../061-gvfs-daemons_1.30.4-1_armhf.deb ... Unpacking gvfs-daemons (1.30.4-1) ... Selecting previously unselected package gvfs:armhf. Preparing to unpack .../062-gvfs_1.30.4-1_armhf.deb ... Unpacking gvfs:armhf (1.30.4-1) ... Selecting previously unselected package libatk1.0-data. Preparing to unpack .../063-libatk1.0-data_2.22.0-1_all.deb ... Unpacking libatk1.0-data (2.22.0-1) ... Selecting previously unselected package libatk1.0-0:armhf. Preparing to unpack .../064-libatk1.0-0_2.22.0-1_armhf.deb ... Unpacking libatk1.0-0:armhf (2.22.0-1) ... Selecting previously unselected package libcairo-gobject2:armhf. Preparing to unpack .../065-libcairo-gobject2_1.14.8-1+rpi1_armhf.deb ... Unpacking libcairo-gobject2:armhf (1.14.8-1+rpi1) ... Selecting previously unselected package libgtk-3-common. Preparing to unpack .../066-libgtk-3-common_3.22.11-1+rpi3_all.deb ... Unpacking libgtk-3-common (3.22.11-1+rpi3) ... Selecting previously unselected package libatk-bridge2.0-0:armhf. Preparing to unpack .../067-libatk-bridge2.0-0_2.22.0-2_armhf.deb ... Unpacking libatk-bridge2.0-0:armhf (2.22.0-2) ... Selecting previously unselected package liblcms2-2:armhf. Preparing to unpack .../068-liblcms2-2_2.8-4_armhf.deb ... Unpacking liblcms2-2:armhf (2.8-4) ... Selecting previously unselected package libcolord2:armhf. Preparing to unpack .../069-libcolord2_1.3.3-2_armhf.deb ... Unpacking libcolord2:armhf (1.3.3-2) ... Selecting previously unselected package libjson-glib-1.0-common. Preparing to unpack .../070-libjson-glib-1.0-common_1.2.6-1_all.deb ... Unpacking libjson-glib-1.0-common (1.2.6-1) ... Selecting previously unselected package libjson-glib-1.0-0:armhf. Preparing to unpack .../071-libjson-glib-1.0-0_1.2.6-1_armhf.deb ... Unpacking libjson-glib-1.0-0:armhf (1.2.6-1) ... Selecting previously unselected package libproxy1v5:armhf. Preparing to unpack .../072-libproxy1v5_0.4.14-2_armhf.deb ... Unpacking libproxy1v5:armhf (0.4.14-2) ... Selecting previously unselected package glib-networking-common. Preparing to unpack .../073-glib-networking-common_2.50.0-1_all.deb ... Unpacking glib-networking-common (2.50.0-1) ... Selecting previously unselected package glib-networking-services. Preparing to unpack .../074-glib-networking-services_2.50.0-1_armhf.deb ... Unpacking glib-networking-services (2.50.0-1) ... Selecting previously unselected package gsettings-desktop-schemas. Preparing to unpack .../075-gsettings-desktop-schemas_3.22.0-1_all.deb ... Unpacking gsettings-desktop-schemas (3.22.0-1) ... Selecting previously unselected package glib-networking:armhf. Preparing to unpack .../076-glib-networking_2.50.0-1_armhf.deb ... Unpacking glib-networking:armhf (2.50.0-1) ... Selecting previously unselected package libsoup2.4-1:armhf. Preparing to unpack .../077-libsoup2.4-1_2.56.0-2+deb9u1_armhf.deb ... Unpacking libsoup2.4-1:armhf (2.56.0-2+deb9u1) ... Selecting previously unselected package libsoup-gnome2.4-1:armhf. Preparing to unpack .../078-libsoup-gnome2.4-1_2.56.0-2+deb9u1_armhf.deb ... Unpacking libsoup-gnome2.4-1:armhf (2.56.0-2+deb9u1) ... Selecting previously unselected package librest-0.7-0:armhf. Preparing to unpack .../079-librest-0.7-0_0.8.0-2_armhf.deb ... Unpacking librest-0.7-0:armhf (0.8.0-2) ... Selecting previously unselected package libgtk-3-0:armhf. Preparing to unpack .../080-libgtk-3-0_3.22.11-1+rpi3_armhf.deb ... Unpacking libgtk-3-0:armhf (3.22.11-1+rpi3) ... Selecting previously unselected package libcaja-extension1:armhf. Preparing to unpack .../081-libcaja-extension1_1.16.6-1+deb9u1_armhf.deb ... Unpacking libcaja-extension1:armhf (1.16.6-1+deb9u1) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../082-libglib2.0-data_2.50.3-2_all.deb ... Unpacking libglib2.0-data (2.50.3-2) ... Selecting previously unselected package libmate-desktop-2-17:armhf. Preparing to unpack .../083-libmate-desktop-2-17_1.16.2-2_armhf.deb ... Unpacking libmate-desktop-2-17:armhf (1.16.2-2) ... Selecting previously unselected package mate-desktop-common. Preparing to unpack .../084-mate-desktop-common_1.16.2-2_all.deb ... Unpacking mate-desktop-common (1.16.2-2) ... Selecting previously unselected package python-six. Preparing to unpack .../085-python-six_1.10.0-3_all.deb ... Unpacking python-six (1.10.0-3) ... Selecting previously unselected package python-urllib3. Preparing to unpack .../086-python-urllib3_1.19.1-1_all.deb ... Unpacking python-urllib3 (1.19.1-1) ... Selecting previously unselected package python-pkg-resources. Preparing to unpack .../087-python-pkg-resources_33.1.1-1_all.deb ... Unpacking python-pkg-resources (33.1.1-1) ... Selecting previously unselected package python-chardet. Preparing to unpack .../088-python-chardet_2.3.0-2_all.deb ... Unpacking python-chardet (2.3.0-2) ... Selecting previously unselected package python-requests. Preparing to unpack .../089-python-requests_2.12.4-1_all.deb ... Unpacking python-requests (2.12.4-1) ... Selecting previously unselected package mate-desktop. Preparing to unpack .../090-mate-desktop_1.16.2-2_armhf.deb ... Unpacking mate-desktop (1.16.2-2) ... Selecting previously unselected package libexempi3:armhf. Preparing to unpack .../091-libexempi3_2.4.1-1_armhf.deb ... Unpacking libexempi3:armhf (2.4.1-1) ... Selecting previously unselected package libgail-3-0:armhf. Preparing to unpack .../092-libgail-3-0_3.22.11-1+rpi3_armhf.deb ... Unpacking libgail-3-0:armhf (3.22.11-1+rpi3) ... Selecting previously unselected package libpangoxft-1.0-0:armhf. Preparing to unpack .../093-libpangoxft-1.0-0_1.40.5-1_armhf.deb ... Unpacking libpangoxft-1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package libpango1.0-0:armhf. Preparing to unpack .../094-libpango1.0-0_1.40.5-1_armhf.deb ... Unpacking libpango1.0-0:armhf (1.40.5-1) ... Selecting previously unselected package libunique-3.0-0. Preparing to unpack .../095-libunique-3.0-0_3.0.2-2_armhf.deb ... Unpacking libunique-3.0-0 (3.0.2-2) ... Selecting previously unselected package caja. Preparing to unpack .../096-caja_1.16.6-1+deb9u1_armhf.deb ... Unpacking caja (1.16.6-1+deb9u1) ... Selecting previously unselected package debian-mate-default-settings. Preparing to unpack .../097-debian-mate-default-settings_1.16.1-1_all.deb ... Unpacking debian-mate-default-settings (1.16.1-1) ... Selecting previously unselected package libdbus-glib-1-2:armhf. Preparing to unpack .../098-libdbus-glib-1-2_0.108-2_armhf.deb ... Unpacking libdbus-glib-1-2:armhf (0.108-2) ... Selecting previously unselected package libgtk2.0-common. Preparing to unpack .../099-libgtk2.0-common_2.24.31-2_all.deb ... Unpacking libgtk2.0-common (2.24.31-2) ... Selecting previously unselected package libgtk2.0-0:armhf. Preparing to unpack .../100-libgtk2.0-0_2.24.31-2_armhf.deb ... Unpacking libgtk2.0-0:armhf (2.24.31-2) ... Selecting previously unselected package libhunspell-1.4-0:armhf. Preparing to unpack .../101-libhunspell-1.4-0_1.4.1-2_armhf.deb ... Unpacking libhunspell-1.4-0:armhf (1.4.1-2) ... Selecting previously unselected package libjsoncpp1:armhf. Preparing to unpack .../102-libjsoncpp1_1.7.4-3_armhf.deb ... Unpacking libjsoncpp1:armhf (1.7.4-3) ... Selecting previously unselected package libvpx4:armhf. Preparing to unpack .../103-libvpx4_1.6.1-3+deb9u1_armhf.deb ... Unpacking libvpx4:armhf (1.6.1-3+deb9u1) ... Selecting previously unselected package firefox-esr. Preparing to unpack .../104-firefox-esr_52.7.3esr-1~deb9u1_armhf.deb ... Adding 'diversion of /usr/bin/firefox to /usr/bin/firefox.real by firefox-esr' Unpacking firefox-esr (52.7.3esr-1~deb9u1) ... Selecting previously unselected package gtk2-engines:armhf. Preparing to unpack .../105-gtk2-engines_1%3a2.20.2-3_armhf.deb ... Unpacking gtk2-engines:armhf (1:2.20.2-3) ... Selecting previously unselected package gtk2-engines-murrine:armhf. Preparing to unpack .../106-gtk2-engines-murrine_0.98.1.1-6_armhf.deb ... Unpacking gtk2-engines-murrine:armhf (0.98.1.1-6) ... Selecting previously unselected package gtk2-engines-pixbuf:armhf. Preparing to unpack .../107-gtk2-engines-pixbuf_2.24.31-2_armhf.deb ... Unpacking gtk2-engines-pixbuf:armhf (2.24.31-2) ... Selecting previously unselected package libarchive13:armhf. Preparing to unpack .../108-libarchive13_3.2.2-2_armhf.deb ... Unpacking libarchive13:armhf (3.2.2-2) ... Selecting previously unselected package libavahi-glib1:armhf. Preparing to unpack .../109-libavahi-glib1_0.6.32-2_armhf.deb ... Unpacking libavahi-glib1:armhf (0.6.32-2) ... Selecting previously unselected package libcdio13:armhf. Preparing to unpack .../110-libcdio13_0.83-4.3_armhf.deb ... Unpacking libcdio13:armhf (0.83-4.3) ... Selecting previously unselected package libcdio-cdda1:armhf. Preparing to unpack .../111-libcdio-cdda1_0.83-4.3_armhf.deb ... Unpacking libcdio-cdda1:armhf (0.83-4.3) ... Selecting previously unselected package libcdio-paranoia1:armhf. Preparing to unpack .../112-libcdio-paranoia1_0.83-4.3_armhf.deb ... Unpacking libcdio-paranoia1:armhf (0.83-4.3) ... Selecting previously unselected package libgoa-1.0-common. Preparing to unpack .../113-libgoa-1.0-common_3.22.5-1_all.deb ... Unpacking libgoa-1.0-common (3.22.5-1) ... Selecting previously unselected package libgoa-1.0-0b:armhf. Preparing to unpack .../114-libgoa-1.0-0b_3.22.5-1_armhf.deb ... Unpacking libgoa-1.0-0b:armhf (3.22.5-1) ... Selecting previously unselected package libnspr4:armhf. Preparing to unpack .../115-libnspr4_2%3a4.12-6_armhf.deb ... Unpacking libnspr4:armhf (2:4.12-6) ... Selecting previously unselected package libnss3:armhf. Preparing to unpack .../116-libnss3_2%3a3.26.2-1.1+deb9u1_armhf.deb ... Unpacking libnss3:armhf (2:3.26.2-1.1+deb9u1) ... Selecting previously unselected package liboauth0:armhf. Preparing to unpack .../117-liboauth0_1.0.1-1+b1_armhf.deb ... Unpacking liboauth0:armhf (1.0.1-1+b1) ... Selecting previously unselected package libgdata-common. Preparing to unpack .../118-libgdata-common_0.17.6-2_all.deb ... Unpacking libgdata-common (0.17.6-2) ... Selecting previously unselected package libgdata22:armhf. Preparing to unpack .../119-libgdata22_0.17.6-2_armhf.deb ... Unpacking libgdata22:armhf (0.17.6-2) ... Selecting previously unselected package libwebp6:armhf. Preparing to unpack .../120-libwebp6_0.5.2-1_armhf.deb ... Unpacking libwebp6:armhf (0.5.2-1) ... Selecting previously unselected package libgd3:armhf. Preparing to unpack .../121-libgd3_2.2.4-2+deb9u2_armhf.deb ... Unpacking libgd3:armhf (2.2.4-2+deb9u2) ... Selecting previously unselected package libltdl7:armhf. Preparing to unpack .../122-libltdl7_2.4.6-2_armhf.deb ... Unpacking libltdl7:armhf (2.4.6-2) ... Selecting previously unselected package libgphoto2-port12:armhf. Preparing to unpack .../123-libgphoto2-port12_2.5.12-1_armhf.deb ... Unpacking libgphoto2-port12:armhf (2.5.12-1) ... Selecting previously unselected package libgphoto2-6:armhf. Preparing to unpack .../124-libgphoto2-6_2.5.12-1_armhf.deb ... Unpacking libgphoto2-6:armhf (2.5.12-1) ... Selecting previously unselected package libplist3:armhf. Preparing to unpack .../125-libplist3_1.12+git+1+e37ca00-0.3_armhf.deb ... Unpacking libplist3:armhf (1.12+git+1+e37ca00-0.3) ... Selecting previously unselected package libusbmuxd4:armhf. Preparing to unpack .../126-libusbmuxd4_1.0.10-3_armhf.deb ... Unpacking libusbmuxd4:armhf (1.0.10-3) ... Selecting previously unselected package libimobiledevice6:armhf. Preparing to unpack .../127-libimobiledevice6_1.2.0+dfsg-3.1_armhf.deb ... Unpacking libimobiledevice6:armhf (1.2.0+dfsg-3.1) ... Selecting previously unselected package libnfs8:armhf. Preparing to unpack .../128-libnfs8_1.11.0-2_armhf.deb ... Unpacking libnfs8:armhf (1.11.0-2) ... Selecting previously unselected package gvfs-backends. Preparing to unpack .../129-gvfs-backends_1.30.4-1_armhf.deb ... Unpacking gvfs-backends (1.30.4-1) ... Selecting previously unselected package gvfs-bin. Preparing to unpack .../130-gvfs-bin_1.30.4-1_armhf.deb ... Unpacking gvfs-bin (1.30.4-1) ... Selecting previously unselected package iceweasel. Preparing to unpack .../131-iceweasel_52.7.3esr-1~deb9u1_all.deb ... Unpacking iceweasel (52.7.3esr-1~deb9u1) ... Selecting previously unselected package iso-codes. Preparing to unpack .../132-iso-codes_3.75-1_all.deb ... Unpacking iso-codes (3.75-1) ... Selecting previously unselected package libasyncns0:armhf. Preparing to unpack .../133-libasyncns0_0.8-6_armhf.deb ... Unpacking libasyncns0:armhf (0.8-6) ... Selecting previously unselected package libvorbis0a:armhf. Preparing to unpack .../134-libvorbis0a_1.3.5-4+deb9u2_armhf.deb ... Unpacking libvorbis0a:armhf (1.3.5-4+deb9u2) ... Selecting previously unselected package libvorbisfile3:armhf. Preparing to unpack .../135-libvorbisfile3_1.3.5-4+deb9u2_armhf.deb ... Unpacking libvorbisfile3:armhf (1.3.5-4+deb9u2) ... Selecting previously unselected package libcanberra0:armhf. Preparing to unpack .../136-libcanberra0_0.30-3+b2_armhf.deb ... Unpacking libcanberra0:armhf (0.30-3+b2) ... Selecting previously unselected package libcanberra-gtk3-0:armhf. Preparing to unpack .../137-libcanberra-gtk3-0_0.30-3+b2_armhf.deb ... Unpacking libcanberra-gtk3-0:armhf (0.30-3+b2) ... Selecting previously unselected package libenchant1c2a:armhf. Preparing to unpack .../138-libenchant1c2a_1.6.0-11+b1_armhf.deb ... Unpacking libenchant1c2a:armhf (1.6.0-11+b1) ... Selecting previously unselected package libflac8:armhf. Preparing to unpack .../139-libflac8_1.3.2-1_armhf.deb ... Unpacking libflac8:armhf (1.3.2-1) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../140-libglib2.0-bin_2.50.3-2_armhf.deb ... Unpacking libglib2.0-bin (2.50.3-2) ... Selecting previously unselected package libgstreamer1.0-0:armhf. Preparing to unpack .../141-libgstreamer1.0-0_1.10.4-1_armhf.deb ... Unpacking libgstreamer1.0-0:armhf (1.10.4-1) ... Selecting previously unselected package liborc-0.4-0:armhf. Preparing to unpack .../142-liborc-0.4-0_1%3a0.4.26-2_armhf.deb ... Unpacking liborc-0.4-0:armhf (1:0.4.26-2) ... Selecting previously unselected package libgstreamer-plugins-base1.0-0:armhf. Preparing to unpack .../143-libgstreamer-plugins-base1.0-0_1.10.4-1_armhf.deb ... Unpacking libgstreamer-plugins-base1.0-0:armhf (1.10.4-1) ... Selecting previously unselected package libgtop2-common. Preparing to unpack .../144-libgtop2-common_2.34.2-1_all.deb ... Unpacking libgtop2-common (2.34.2-1) ... Selecting previously unselected package libgtop-2.0-10:armhf. Preparing to unpack .../145-libgtop-2.0-10_2.34.2-1_armhf.deb ... Unpacking libgtop-2.0-10:armhf (2.34.2-1) ... Selecting previously unselected package libharfbuzz-icu0:armhf. Preparing to unpack .../146-libharfbuzz-icu0_1.4.2-1_armhf.deb ... Unpacking libharfbuzz-icu0:armhf (1.4.2-1) ... Selecting previously unselected package libhyphen0:armhf. Preparing to unpack .../147-libhyphen0_2.8.8-5_armhf.deb ... Unpacking libhyphen0:armhf (2.8.8-5) ... Selecting previously unselected package libjavascriptcoregtk-4.0-18:armhf. Preparing to unpack .../148-libjavascriptcoregtk-4.0-18_2.16.6-0+deb9u1+rpi1_armhf.deb ... Unpacking libjavascriptcoregtk-4.0-18:armhf (2.16.6-0+deb9u1+rpi1) ... Selecting previously unselected package libmarco-private1:armhf. Preparing to unpack .../149-libmarco-private1_1.16.1-1_armhf.deb ... Unpacking libmarco-private1:armhf (1.16.1-1) ... Selecting previously unselected package libmate-menu2:armhf. Preparing to unpack .../150-libmate-menu2_1.16.0-2_armhf.deb ... Unpacking libmate-menu2:armhf (1.16.0-2) ... Selecting previously unselected package libmate-panel-applet-4-1. Preparing to unpack .../151-libmate-panel-applet-4-1_1.16.2-1_armhf.deb ... Unpacking libmate-panel-applet-4-1 (1.16.2-1) ... Selecting previously unselected package libmate-slab0:armhf. Preparing to unpack .../152-libmate-slab0_1.16.1-1_armhf.deb ... Unpacking libmate-slab0:armhf (1.16.1-1) ... Selecting previously unselected package libmate-window-settings1:armhf. Preparing to unpack .../153-libmate-window-settings1_1.16.1-1_armhf.deb ... Unpacking libmate-window-settings1:armhf (1.16.1-1) ... Selecting previously unselected package libmatekbd-common. Preparing to unpack .../154-libmatekbd-common_1.16.0-2_all.deb ... Unpacking libmatekbd-common (1.16.0-2) ... Selecting previously unselected package libxklavier16:armhf. Preparing to unpack .../155-libxklavier16_5.4-2_armhf.deb ... Unpacking libxklavier16:armhf (5.4-2) ... Selecting previously unselected package libmatekbd4:armhf. Preparing to unpack .../156-libmatekbd4_1.16.0-2_armhf.deb ... Unpacking libmatekbd4:armhf (1.16.0-2) ... Selecting previously unselected package libmatemixer-common. Preparing to unpack .../157-libmatemixer-common_1.16.0-2_all.deb ... Unpacking libmatemixer-common (1.16.0-2) ... Selecting previously unselected package libvorbisenc2:armhf. Preparing to unpack .../158-libvorbisenc2_1.3.5-4+deb9u2_armhf.deb ... Unpacking libvorbisenc2:armhf (1.3.5-4+deb9u2) ... Selecting previously unselected package libsndfile1:armhf. Preparing to unpack .../159-libsndfile1_1.0.27-3_armhf.deb ... Unpacking libsndfile1:armhf (1.0.27-3) ... Selecting previously unselected package libpulse0:armhf. Preparing to unpack .../160-libpulse0_10.0-1+deb9u1_armhf.deb ... Unpacking libpulse0:armhf (10.0-1+deb9u1) ... Selecting previously unselected package libpulse-mainloop-glib0:armhf. Preparing to unpack .../161-libpulse-mainloop-glib0_10.0-1+deb9u1_armhf.deb ... Unpacking libpulse-mainloop-glib0:armhf (10.0-1+deb9u1) ... Selecting previously unselected package libmatemixer0:armhf. Preparing to unpack .../162-libmatemixer0_1.16.0-2_armhf.deb ... Unpacking libmatemixer0:armhf (1.16.0-2) ... Selecting previously unselected package libmateweather-common. Preparing to unpack .../163-libmateweather-common_1.16.1-2_all.deb ... Unpacking libmateweather-common (1.16.1-2) ... Selecting previously unselected package libmateweather1:armhf. Preparing to unpack .../164-libmateweather1_1.16.1-2_armhf.deb ... Unpacking libmateweather1:armhf (1.16.1-2) ... Selecting previously unselected package libnotify4:armhf. Preparing to unpack .../165-libnotify4_0.7.7-2_armhf.deb ... Unpacking libnotify4:armhf (0.7.7-2) ... Selecting previously unselected package libpcre2-8-0:armhf. Preparing to unpack .../166-libpcre2-8-0_10.22-3_armhf.deb ... Unpacking libpcre2-8-0:armhf (10.22-3) ... Selecting previously unselected package libpolkit-backend-1-0:armhf. Preparing to unpack .../167-libpolkit-backend-1-0_0.105-18_armhf.deb ... Unpacking libpolkit-backend-1-0:armhf (0.105-18) ... Selecting previously unselected package libupower-glib3:armhf. Preparing to unpack .../168-libupower-glib3_0.99.4-4_armhf.deb ... Unpacking libupower-glib3:armhf (0.99.4-4) ... Selecting previously unselected package libvte-2.91-common. Preparing to unpack .../169-libvte-2.91-common_0.46.1-1_all.deb ... Unpacking libvte-2.91-common (0.46.1-1) ... Selecting previously unselected package libvte-2.91-0:armhf. Preparing to unpack .../170-libvte-2.91-0_0.46.1-1_armhf.deb ... Unpacking libvte-2.91-0:armhf (0.46.1-1) ... Selecting previously unselected package libxslt1.1:armhf. Preparing to unpack .../171-libxslt1.1_1.1.29-2.1_armhf.deb ... Unpacking libxslt1.1:armhf (1.1.29-2.1) ... Selecting previously unselected package libwebkit2gtk-4.0-37:armhf. Preparing to unpack .../172-libwebkit2gtk-4.0-37_2.16.6-0+deb9u1+rpi1_armhf.deb ... Unpacking libwebkit2gtk-4.0-37:armhf (2.16.6-0+deb9u1+rpi1) ... Selecting previously unselected package libwnck-3-common. Preparing to unpack .../173-libwnck-3-common_3.20.1-3_all.deb ... Unpacking libwnck-3-common (3.20.1-3) ... Selecting previously unselected package libwnck-3-0:armhf. Preparing to unpack .../174-libwnck-3-0_3.20.1-3_armhf.deb ... Unpacking libwnck-3-0:armhf (3.20.1-3) ... Selecting previously unselected package marco-common. Preparing to unpack .../175-marco-common_1.16.1-1_all.deb ... Unpacking marco-common (1.16.1-1) ... Selecting previously unselected package zenity-common. Preparing to unpack .../176-zenity-common_3.22.0-1_all.deb ... Unpacking zenity-common (3.22.0-1) ... Selecting previously unselected package zenity. Preparing to unpack .../177-zenity_3.22.0-1_armhf.deb ... Unpacking zenity (3.22.0-1) ... Selecting previously unselected package marco. Preparing to unpack .../178-marco_1.16.1-1_armhf.deb ... Unpacking marco (1.16.1-1) ... Selecting previously unselected package mate-backgrounds. Preparing to unpack .../179-mate-backgrounds_1.16.0-1_all.deb ... Unpacking mate-backgrounds (1.16.0-1) ... Selecting previously unselected package mate-control-center-common. Preparing to unpack .../180-mate-control-center-common_1.16.1-1_all.deb ... Unpacking mate-control-center-common (1.16.1-1) ... Selecting previously unselected package mate-icon-theme. Preparing to unpack .../181-mate-icon-theme_1.16.2-1_all.deb ... Unpacking mate-icon-theme (1.16.2-1) ... Selecting previously unselected package python-mate-menu. Preparing to unpack .../182-python-mate-menu_1.16.0-2_armhf.deb ... Unpacking python-mate-menu (1.16.0-2) ... Selecting previously unselected package mate-menus. Preparing to unpack .../183-mate-menus_1.16.0-2_armhf.deb ... Unpacking mate-menus (1.16.0-2) ... Selecting previously unselected package mate-polkit-common. Preparing to unpack .../184-mate-polkit-common_1.16.0-2_armhf.deb ... Unpacking mate-polkit-common (1.16.0-2) ... Selecting previously unselected package policykit-1. Preparing to unpack .../185-policykit-1_0.105-18_armhf.deb ... Unit polkit.service does not exist, proceeding anyway. Created symlink /run/systemd/system/polkit.service → /dev/null. Unpacking policykit-1 (0.105-18) ... Selecting previously unselected package mate-polkit:armhf. Preparing to unpack .../186-mate-polkit_1.16.0-2_armhf.deb ... Unpacking mate-polkit:armhf (1.16.0-2) ... Selecting previously unselected package mate-settings-daemon-common. Preparing to unpack .../187-mate-settings-daemon-common_1.16.2-1_all.deb ... Unpacking mate-settings-daemon-common (1.16.2-1) ... Selecting previously unselected package mate-settings-daemon. Preparing to unpack .../188-mate-settings-daemon_1.16.2-1_armhf.deb ... Unpacking mate-settings-daemon (1.16.2-1) ... Selecting previously unselected package mate-control-center. Preparing to unpack .../189-mate-control-center_1.16.1-1_armhf.deb ... Unpacking mate-control-center (1.16.1-1) ... Selecting previously unselected package mate-notification-daemon-common. Preparing to unpack .../190-mate-notification-daemon-common_1.16.1-1_all.deb ... Unpacking mate-notification-daemon-common (1.16.1-1) ... Selecting previously unselected package mate-notification-daemon. Preparing to unpack .../191-mate-notification-daemon_1.16.1-1_armhf.deb ... Unpacking mate-notification-daemon (1.16.1-1) ... Selecting previously unselected package mate-panel-common. Preparing to unpack .../192-mate-panel-common_1.16.2-1_all.deb ... Unpacking mate-panel-common (1.16.2-1) ... Selecting previously unselected package menu-xdg. Preparing to unpack .../193-menu-xdg_0.5_all.deb ... Unpacking menu-xdg (0.5) ... Selecting previously unselected package mate-panel. Preparing to unpack .../194-mate-panel_1.16.2-1_armhf.deb ... Unpacking mate-panel (1.16.2-1) ... Selecting previously unselected package upower. Preparing to unpack .../195-upower_0.99.4-4_armhf.deb ... Unpacking upower (0.99.4-4) ... Selecting previously unselected package mate-session-manager. Preparing to unpack .../196-mate-session-manager_1.16.1-1_armhf.deb ... Unpacking mate-session-manager (1.16.1-1) ... Selecting previously unselected package mate-terminal-common. Preparing to unpack .../197-mate-terminal-common_1.16.3-1_all.deb ... Unpacking mate-terminal-common (1.16.3-1) ... Selecting previously unselected package mate-terminal. Preparing to unpack .../198-mate-terminal_1.16.3-1_armhf.deb ... Unpacking mate-terminal (1.16.3-1) ... Selecting previously unselected package mate-themes. Preparing to unpack .../199-mate-themes_3.22.11-1+deb9u1_all.deb ... Unpacking mate-themes (3.22.11-1+deb9u1) ... Selecting previously unselected package mate-desktop-environment-core. Preparing to unpack .../200-mate-desktop-environment-core_1.16.0+1_all.deb ... Unpacking mate-desktop-environment-core (1.16.0+1) ... Selecting previously unselected package mate-desktop-environment. Preparing to unpack .../201-mate-desktop-environment_1.16.0+1_all.deb ... Unpacking mate-desktop-environment (1.16.0+1) ... Selecting previously unselected package mate-desktop-environment-extras. Preparing to unpack .../202-mate-desktop-environment-extras_1.16.0+1_all.deb ... Unpacking mate-desktop-environment-extras (1.16.0+1) ... Setting up mate-panel-common (1.16.2-1) ... Setting up libtdb1:armhf (1.3.11-2) ... Setting up libsecret-common (0.18.5-3.1) ... Setting up libwbclient0:armhf (2:4.5.12+dfsg-2+deb9u2) ... Setting up libatasmart4:armhf (0.19-4) ... Setting up libwnck-3-common (3.20.1-3) ... Setting up libjson-glib-1.0-common (1.2.6-1) ... Setting up libgtk2.0-common (2.24.31-2) ... Setting up libxcb-render0:armhf (1.12-1) ... Setting up libasyncns0:armhf (0.8-6) ... Setting up libpam-systemd:armhf (232-25+deb9u2) ... Setting up libxcb-util0:armhf (0.3.8-3) ... Setting up libcdio13:armhf (0.83-4.3) ... Setting up glib-networking-common (2.50.0-1) ... Setting up libgstreamer1.0-0:armhf (1.10.4-1) ... Setcap worked! gst-ptp-helper is not suid! Setting up libjpeg62-turbo:armhf (1:1.5.1-2) ... Setting up mime-support (3.60) ... Setting up desktop-file-utils (0.23-1) ... Setting up iso-codes (3.75-1) ... Setting up mate-backgrounds (1.16.0-1) ... Setting up liblcms2-2:armhf (2.8-4) ... Setting up libjbig0:armhf (2.1-3.1) ... Setting up libaspell15:armhf (0.60.7~20110707-3) ... Setting up libxres1:armhf (2:1.0.7-1) ... Setting up libdbus-glib-1-2:armhf (0.108-2) ... Setting up libgtop2-common (2.34.2-1) ... Setting up debian-mate-default-settings (1.16.1-1) ... Setting up libatspi2.0-0:armhf (2.22.0-6+deb9u1) ... Setting up libcdio-cdda1:armhf (0.83-4.3) ... Setting up at-spi2-core (2.22.0-6+deb9u1) ... Setting up mate-polkit-common (1.16.0-2) ... Processing triggers for libglib2.0-0:armhf (2.50.3-2) ... Setting up libxss1:armhf (1:1.2.2-1) ... Setting up emacsen-common (2.0.8) ... Setting up libproxy1v5:armhf (0.4.14-2) ... Setting up libudisks2-0:armhf (2.1.8-1) ... Setting up libgtop-2.0-10:armhf (2.34.2-1) ... Setting up libplist3:armhf (1.12+git+1+e37ca00-0.3) ... Setting up libmate-menu2:armhf (1.16.0-2) ... Setting up libgdk-pixbuf2.0-common (2.36.5-2+deb9u2) ... Setting up glib-networking-services (2.50.0-1) ... Setting up libdatrie1:armhf (0.2.10-4) ... Setting up libtiff5:armhf (4.0.8-2+deb9u2) ... Setting up libexempi3:armhf (2.4.1-1) ... Setting up libicu57:armhf (57.1-6+deb9u2) ... Setting up libnspr4:armhf (2:4.12-6) ... Setting up libvpx4:armhf (1.6.1-3+deb9u1) ... Setting up libxml2:armhf (2.9.4+dfsg1-2.2+deb9u2) ... Setting up libmtp-common (1.1.13-1) ... Setting up menu-xdg (0.5) ... Setting up libgck-1-0:armhf (3.20.0-5.1) ... Setting up libstartup-notification0:armhf (0.12-4) ... Setting up libjson-glib-1.0-0:armhf (1.2.6-1) ... Setting up libgcr-3-common (3.20.0-5.1) ... Setting up libgraphite2-3:armhf (1.3.10-1) ... Setting up libcroco3:armhf (0.6.11-3) ... Setting up libxslt1.1:armhf (1.1.29-2.1) ... Setting up libaccountsservice0:armhf (0.6.43-1) ... Setting up libogg0:armhf (1.3.2-1) ... Setting up libatk1.0-data (2.22.0-1) ... Setting up libhyphen0:armhf (2.8.8-5) ... Setting up libvte-2.91-common (0.46.1-1) ... Setting up libglib2.0-data (2.50.3-2) ... Setting up libmatemixer-common (1.16.0-2) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for udev (232-25+deb9u2) ... Setting up libatk1.0-0:armhf (2.22.0-1) ... Setting up libbluray1:armhf (1:0.9.3-4) ... Setting up libltdl7:armhf (2.4.6-2) ... Setting up libmtp9:armhf (1.1.13-1) ... Setting up libatk-bridge2.0-0:armhf (2.22.0-2) ... Setting up libupower-glib3:armhf (0.99.4-4) ... Setting up zenity-common (3.22.0-1) ... Setting up libdconf1:armhf (0.26.0-2) ... Setting up libxcb-shm0:armhf (1.12-1) ... Setting up shared-mime-info (1.8-1) ... Setting up libtalloc2:armhf (2.1.8-1) ... Setting up libjavascriptcoregtk-4.0-18:armhf (2.16.6-0+deb9u1+rpi1) ... Setting up libcdio-paranoia1:armhf (0.83-4.3) ... Setting up liborc-0.4-0:armhf (1:0.4.26-2) ... Setting up libcolord2:armhf (1.3.3-2) ... Setting up libthai-data (0.1.26-1) ... Processing triggers for dbus (1.10.26-0+deb9u1) ... Setting up libpcre2-8-0:armhf (10.22-3) ... Setting up libevent-2.0-5:armhf (2.0.21-stable-3) ... Setting up libgdata-common (0.17.6-2) ... Setting up libvorbis0a:armhf (1.3.5-4+deb9u2) ... Setting up libusbmuxd4:armhf (1.0.10-3) ... Setting up hicolor-icon-theme (0.15-1) ... Setting up libsecret-1-0:armhf (0.18.5-3.1) ... Setting up libglib2.0-bin (2.50.3-2) ... Setting up libexif12:armhf (0.6.21-2) ... Setting up libnfs8:armhf (1.11.0-2) ... Setting up libimobiledevice6:armhf (1.2.0+dfsg-3.1) ... Setting up libhunspell-1.4-0:armhf (1.4.1-2) ... Setting up libpython2.7-stdlib:armhf (2.7.13-2+deb9u2) ... Setting up libpolkit-gobject-1-0:armhf (0.105-18) ... Setting up fontconfig (2.11.0-6.7) ... Regenerating fonts cache... done. Setting up liblzo2-2:armhf (2.08-1.2) ... Setting up libavahi-common-data:armhf (0.6.32-2) ... Setting up libwebp6:armhf (0.5.2-1) ... Setting up libxklavier16:armhf (5.4-2) ... Setting up libjsoncpp1:armhf (1.7.4-3) ... Setting up libvorbisfile3:armhf (1.3.5-4+deb9u2) ... Setting up libgstreamer-plugins-base1.0-0:armhf (1.10.4-1) ... Setting up libcairo2:armhf (1.14.8-1+rpi1) ... Setting up libgphoto2-port12:armhf (2.5.12-1) ... Setting up libgcr-base-3-1:armhf (3.20.0-5.1) ... Setting up gvfs-common (1.30.4-1) ... Setting up libcanberra0:armhf (0.30-3+b2) ... Setting up dconf-service (0.26.0-2) ... Setting up dictionaries-common (1.27.2) ... Setting up libarchive13:armhf (3.2.2-2) ... Setting up libpolkit-agent-1-0:armhf (0.105-18) ... Setting up gvfs-bin (1.30.4-1) ... Setting up libgdk-pixbuf2.0-0:armhf (2.36.5-2+deb9u2) ... Setting up libcairo-gobject2:armhf (1.14.8-1+rpi1) ... Setting up libflac8:armhf (1.3.2-1) ... Setting up python2.7 (2.7.13-2+deb9u2) ... Setting up libgd3:armhf (2.2.4-2+deb9u2) ... Setting up libnss3:armhf (2:3.26.2-1.1+deb9u1) ... Setting up libharfbuzz0b:armhf (1.4.2-1) ... Setting up udisks2 (2.1.8-1) ... Setting up libthai0:armhf (0.1.26-1) ... Setting up upower (0.99.4-4) ... Setting up libpython-stdlib:armhf (2.7.13-2) ... Setting up liboauth0:armhf (1.0.1-1+b1) ... Setting up libtevent0:armhf (0.9.31-1) ... Setting up gtk-update-icon-cache (3.22.11-1+rpi3) ... Setting up libpolkit-backend-1-0:armhf (0.105-18) ... Setting up gvfs-libs:armhf (1.30.4-1) ... Setting up libpango-1.0-0:armhf (1.40.5-1) ... Setting up libpython2.7:armhf (2.7.13-2+deb9u2) ... Setting up libpangox-1.0-0:armhf (0.0.2-5) ... Setting up libavahi-common3:armhf (0.6.32-2) ... Setting up libavahi-glib1:armhf (0.6.32-2) ... Setting up accountsservice (0.6.43-1) ... Created symlink /etc/systemd/system/graphical.target.wants/accounts-daemon.service → /lib/systemd/system/accounts-daemon.service. Setting up libvorbisenc2:armhf (1.3.5-4+deb9u2) ... Setting up aspell (0.60.7~20110707-3) ... Setting up dconf-gsettings-backend:armhf (0.26.0-2) ... Setting up mate-notification-daemon-common (1.16.1-1) ... Setting up python (2.7.13-2) ... Setting up python-talloc (2.1.8-1) ... Setting up libnotify4:armhf (0.7.7-2) ... Setting up mate-terminal-common (1.16.3-1) ... Setting up gvfs-daemons (1.30.4-1) ... Setting up libharfbuzz-icu0:armhf (1.4.2-1) ... Setting up gsettings-desktop-schemas (3.22.0-1) ... Setting up libgtk-3-common (3.22.11-1+rpi3) ... Setting up policykit-1 (0.105-18) ... Removed /run/systemd/system/polkit.service. polkit.service is a disabled or a static unit not running, not starting it. Setting up libldb1:armhf (2:1.1.27-1) ... Setting up libgphoto2-6:armhf (2.5.12-1) ... Setting up libmateweather-common (1.16.1-2) ... Setting up mate-settings-daemon-common (1.16.2-1) ... Setting up python-pkg-resources (33.1.1-1) ... Setting up caja-common (1.16.6-1+deb9u1) ... Setting up libmatekbd-common (1.16.0-2) ... Setting up libpangoft2-1.0-0:armhf (1.40.5-1) ... Setting up python-mate-menu (1.16.0-2) ... Setting up gvfs:armhf (1.30.4-1) ... Setting up libsndfile1:armhf (1.0.27-3) ... Setting up python-six (1.10.0-3) ... Setting up mate-desktop-common (1.16.2-2) ... Setting up mate-control-center-common (1.16.1-1) ... Setting up glib-networking:armhf (2.50.0-1) ... Setting up aspell-en (2016.11.20-0-0.1) ... Setting up marco-common (1.16.1-1) ... Setting up libgoa-1.0-common (3.22.5-1) ... Setting up libavahi-client3:armhf (0.6.32-2) ... Setting up libcups2:armhf (2.2.1-8) ... Setting up libenchant1c2a:armhf (1.6.0-11+b1) ... Setting up python-urllib3 (1.19.1-1) ... Setting up mate-menus (1.16.0-2) ... Setting up samba-libs:armhf (2:4.5.12+dfsg-2+deb9u2) ... Setting up python-chardet (2.3.0-2) ... Setting up libpangoxft-1.0-0:armhf (1.40.5-1) ... Setting up libsoup2.4-1:armhf (2.56.0-2+deb9u1) ... Setting up libsoup-gnome2.4-1:armhf (2.56.0-2+deb9u1) ... Setting up libpangocairo-1.0-0:armhf (1.40.5-1) ... Setting up libpulse0:armhf (10.0-1+deb9u1) ... Setting up libsmbclient:armhf (2:4.5.12+dfsg-2+deb9u2) ... Setting up libgoa-1.0-0b:armhf (3.22.5-1) ... Setting up python-requests (2.12.4-1) ... Setting up librest-0.7-0:armhf (0.8.0-2) ... Setting up libpulse-mainloop-glib0:armhf (10.0-1+deb9u1) ... Setting up libpango1.0-0:armhf (1.40.5-1) ... Setting up librsvg2-2:armhf (2.40.16-1) ... Setting up libmatemixer0:armhf (1.16.0-2) ... Setting up libgdata22:armhf (0.17.6-2) ... Setting up librsvg2-common:armhf (2.40.16-1) ... Setting up mate-icon-theme (1.16.2-1) ... Setting up adwaita-icon-theme (3.22.0-1+deb9u1) ... update-alternatives: using /usr/share/icons/Adwaita/cursor.theme to provide /usr/share/icons/default/index.theme (x-cursor-theme) in auto mode Setting up libgtk2.0-0:armhf (2.24.31-2) ... Setting up gtk2-engines-murrine:armhf (0.98.1.1-6) ... Setting up gtk2-engines:armhf (1:2.20.2-3) ... Setting up libgtk-3-0:armhf (3.22.11-1+rpi3) ... Setting up libunique-3.0-0 (3.0.2-2) ... Setting up libcaja-extension1:armhf (1.16.6-1+deb9u1) ... Setting up firefox-esr (52.7.3esr-1~deb9u1) ... update-alternatives: using /usr/bin/firefox-esr to provide /usr/bin/x-www-browser (x-www-browser) in auto mode update-alternatives: using /usr/bin/firefox-esr to provide /usr/bin/gnome-www-browser (gnome-www-browser) in auto mode Setting up libgail-3-0:armhf (3.22.11-1+rpi3) ... Setting up libcanberra-gtk3-0:armhf (0.30-3+b2) ... Setting up gtk2-engines-pixbuf:armhf (2.24.31-2) ... Setting up libmateweather1:armhf (1.16.1-2) ... Setting up mate-themes (3.22.11-1+deb9u1) ... Setting up gvfs-backends (1.30.4-1) ... Setting up iceweasel (52.7.3esr-1~deb9u1) ... Setting up libmate-desktop-2-17:armhf (1.16.2-2) ... Setting up libwnck-3-0:armhf (3.20.1-3) ... Setting up libmatekbd4:armhf (1.16.0-2) ... Setting up mate-session-manager (1.16.1-1) ... update-alternatives: using /usr/bin/mate-session to provide /usr/bin/x-session-manager (x-session-manager) in auto mode Setting up libmate-slab0:armhf (1.16.1-1) ... Setting up libvte-2.91-0:armhf (0.46.1-1) ... Setting up libwebkit2gtk-4.0-37:armhf (2.16.6-0+deb9u1+rpi1) ... Setting up libmate-panel-applet-4-1 (1.16.2-1) ... Setting up mate-desktop (1.16.2-2) ... Setting up mate-polkit:armhf (1.16.0-2) ... Setting up libmarco-private1:armhf (1.16.1-1) ... Setting up mate-notification-daemon (1.16.1-1) ... Setting up mate-panel (1.16.2-1) ... Setting up libmate-window-settings1:armhf (1.16.1-1) ... Setting up caja (1.16.6-1+deb9u1) ... Setting up zenity (3.22.0-1) ... Setting up mate-terminal (1.16.3-1) ... Setting up mate-settings-daemon (1.16.2-1) ... Setting up mate-control-center (1.16.1-1) ... Setting up marco (1.16.1-1) ... update-alternatives: using /usr/bin/marco to provide /usr/bin/x-window-manager (x-window-manager) in auto mode Setting up mate-desktop-environment-core (1.16.0+1) ... Setting up mate-desktop-environment (1.16.0+1) ... Setting up mate-desktop-environment-extras (1.16.0+1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for dictionaries-common (1.27.2) ... aspell-autobuildhash: processing: en [en-common]. aspell-autobuildhash: processing: en [en-variant_0]. aspell-autobuildhash: processing: en [en-variant_1]. aspell-autobuildhash: processing: en [en-variant_2]. aspell-autobuildhash: processing: en [en-w_accents-only]. aspell-autobuildhash: processing: en [en-wo_accents-only]. aspell-autobuildhash: processing: en [en_AU-variant_0]. aspell-autobuildhash: processing: en [en_AU-variant_1]. aspell-autobuildhash: processing: en [en_AU-w_accents-only]. aspell-autobuildhash: processing: en [en_AU-wo_accents-only]. aspell-autobuildhash: processing: en [en_CA-variant_0]. aspell-autobuildhash: processing: en [en_CA-variant_1]. aspell-autobuildhash: processing: en [en_CA-w_accents-only]. aspell-autobuildhash: processing: en [en_CA-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-ise-w_accents-only]. aspell-autobuildhash: processing: en [en_GB-ise-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-ize-w_accents-only]. aspell-autobuildhash: processing: en [en_GB-ize-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-variant_0]. aspell-autobuildhash: processing: en [en_GB-variant_1]. aspell-autobuildhash: processing: en [en_US-w_accents-only]. aspell-autobuildhash: processing: en [en_US-wo_accents-only]. Processing triggers for dbus (1.10.26-0+deb9u1) ... Processing triggers for libgdk-pixbuf2.0-0:armhf (2.36.5-2+deb9u2) ... [ OK ] DietPi-Software | G_AGI: mate-desktop-environment-extras upower policykit-1 iceweasel DietPi-Software ───────────────────────────────────────────────────── Mode: Installing RPi.GPIO: gpio interface library for rpi (python) [ OK ] DietPi-Software | APT installation for: python-rpi.gpio python3-rpi.gpio, please wait... Selecting previously unselected package libpython3.5-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 55215 files and directories currently installed.) Preparing to unpack .../0-libpython3.5-minimal_3.5.3-1_armhf.deb ... Unpacking libpython3.5-minimal:armhf (3.5.3-1) ... Selecting previously unselected package python3.5-minimal. Preparing to unpack .../1-python3.5-minimal_3.5.3-1_armhf.deb ... Unpacking python3.5-minimal (3.5.3-1) ... Selecting previously unselected package python3-minimal. Preparing to unpack .../2-python3-minimal_3.5.3-1_armhf.deb ... Unpacking python3-minimal (3.5.3-1) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../3-libmpdec2_2.4.2-1_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-1) ... Selecting previously unselected package libpython3.5-stdlib:armhf. Preparing to unpack .../4-libpython3.5-stdlib_3.5.3-1_armhf.deb ... Unpacking libpython3.5-stdlib:armhf (3.5.3-1) ... Selecting previously unselected package python3.5. Preparing to unpack .../5-python3.5_3.5.3-1_armhf.deb ... Unpacking python3.5 (3.5.3-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../6-libpython3-stdlib_3.5.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.5.3-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../7-dh-python_2.20170125_all.deb ... Unpacking dh-python (2.20170125) ... Setting up libpython3.5-minimal:armhf (3.5.3-1) ... Setting up python3.5-minimal (3.5.3-1) ... Setting up python3-minimal (3.5.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 56129 files and directories currently installed.) Preparing to unpack .../python3_3.5.3-1_armhf.deb ... Unpacking python3 (3.5.3-1) ... Selecting previously unselected package python-rpi.gpio. Preparing to unpack .../python-rpi.gpio_0.6.3~stretch-1_armhf.deb ... Unpacking python-rpi.gpio (0.6.3~stretch-1) ... Selecting previously unselected package python3-rpi.gpio. Preparing to unpack .../python3-rpi.gpio_0.6.3~stretch-1_armhf.deb ... Unpacking python3-rpi.gpio (0.6.3~stretch-1) ... Processing triggers for mime-support (3.60) ... Processing triggers for desktop-file-utils (0.23-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up libmpdec2:armhf (2.4.2-1) ... Setting up python-rpi.gpio (0.6.3~stretch-1) ... Setting up libpython3.5-stdlib:armhf (3.5.3-1) ... Setting up python3.5 (3.5.3-1) ... Setting up libpython3-stdlib:armhf (3.5.3-1) ... Setting up python3 (3.5.3-1) ... Setting up python3-rpi.gpio (0.6.3~stretch-1) ... Setting up dh-python (2.20170125) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... [ OK ] DietPi-Software | G_AGI: python-rpi.gpio python3-rpi.gpio DietPi-Software ───────────────────────────────────────────────────── Mode: Installing RealVNC Server: desktop for remote connection [ OK ] DietPi-Software | APT installation for: realvnc-vnc-server, please wait... Selecting previously unselected package realvnc-vnc-server. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 56165 files and directories currently installed.) Preparing to unpack .../realvnc-vnc-server_6.2.1.32538_armhf.deb ... Unpacking realvnc-vnc-server (6.2.1.32538) ... Processing triggers for mime-support (3.60) ... Processing triggers for desktop-file-utils (0.23-1) ... Setting up realvnc-vnc-server (6.2.1.32538) ... Updating /etc/pam.d/vncserver Updating /etc/pam.conf... done Looking for font path... not found. Generating private key... done Installed systemd unit for VNC Server in Service Mode daemon Start or stop the service with: systemctl (start|stop) vncserver-x11-serviced.service Mark or unmark the service to be started at boot time with: systemctl (enable|disable) vncserver-x11-serviced.service Installed systemd unit for VNC Server in Virtual Mode daemon Start or stop the service with: systemctl (start|stop) vncserver-virtuald.service Mark or unmark the service to be started at boot time with: systemctl (enable|disable) vncserver-virtuald.service Processing triggers for shared-mime-info (1.8-1) ... Processing triggers for hicolor-icon-theme (0.15-1) ... [ OK ] DietPi-Software | G_AGI: realvnc-vnc-server DietPi-Software ───────────────────────────────────────────────────── Mode: Installing Chromium: (Optional) web browser [ OK ] DietPi-Software | APT installation for: chromium-browser, please wait... Selecting previously unselected package gconf2-common. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 56245 files and directories currently installed.) Preparing to unpack .../0-gconf2-common_3.2.6-4_all.deb ... Unpacking gconf2-common (3.2.6-4) ... Selecting previously unselected package libgconf-2-4:armhf. Preparing to unpack .../1-libgconf-2-4_3.2.6-4_armhf.deb ... Unpacking libgconf-2-4:armhf (3.2.6-4) ... Selecting previously unselected package gconf-service. Preparing to unpack .../2-gconf-service_3.2.6-4_armhf.deb ... Unpacking gconf-service (3.2.6-4) ... Selecting previously unselected package libxcb-image0:armhf. Preparing to unpack .../3-libxcb-image0_0.4.0-1_armhf.deb ... Unpacking libxcb-image0:armhf (0.4.0-1) ... Selecting previously unselected package xdg-utils. Preparing to unpack .../4-xdg-utils_1.1.1-1_all.deb ... Unpacking xdg-utils (1.1.1-1) ... Selecting previously unselected package chromium-browser. Preparing to unpack .../5-chromium-browser_60.0.3112.89-0ubuntu0.14.04.1.1010+1_armhf.deb ... Unpacking chromium-browser (60.0.3112.89-0ubuntu0.14.04.1.1010+1) ... Setting up gconf2-common (3.2.6-4) ... Creating config file /etc/gconf/2/path with new version Setting up libxcb-image0:armhf (0.4.0-1) ... Processing triggers for mime-support (3.60) ... Processing triggers for desktop-file-utils (0.23-1) ... Setting up libgconf-2-4:armhf (3.2.6-4) ... Setting up gconf-service (3.2.6-4) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up xdg-utils (1.1.1-1) ... Processing triggers for hicolor-icon-theme (0.15-1) ... Setting up chromium-browser (60.0.3112.89-0ubuntu0.14.04.1.1010+1) ... update-alternatives: using /usr/bin/chromium-browser to provide /usr/bin/x-www-browser (x-www-browser) in auto mode update-alternatives: using /usr/bin/chromium-browser to provide /usr/bin/gnome-www-browser (gnome-www-browser) in auto mode [ OK ] DietPi-Software | G_AGI: chromium-browser DietPi-Software ───────────────────────────────────────────────────── Mode: Uninstalling Dropbear: ssh server [ INFO ] DietPi-Software | Install verified: dropbear* [ OK ] DietPi-Software | APT removal for: dropbear* , please wait... Reading package lists... Building dependency tree... Reading state information... Package 'dropbear' is not installed, so not removed Package 'dropbear-initramfs' is not installed, so not removed The following packages will be REMOVED: dropbear-bin* dropbear-run* 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 694 kB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 56738 files and directories currently installed.) Removing dropbear-run (2016.74-5) ... Removing dropbear-bin (2016.74-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 56715 files and directories currently installed.) Purging configuration files for dropbear-run (2016.74-5) ... Processing triggers for systemd (232-25+deb9u2) ... [ OK ] DietPi-Software | G_AGP: dropbear* [ SUB1 ] DietPi-Services > stop DietPi-Services | cron [. ] [ OK ] DietPi-Services | stop : cron DietPi-Software ───────────────────────────────────────────────────── Mode: Optimize and configure software [ INFO ] DietPi-Software | Applying DietPi optimizations and configurations for RPi 3 Model B (armv7l), please wait... DietPi-Software ───────────────────────────────────────────────────── Mode: Configuring MATE: desktop enviroment DietPi-Software ───────────────────────────────────────────────────── Mode: Configuring VNC4 Server: desktop for remote connection DietPi-Software ───────────────────────────────────────────────────── Mode: Configuring Chromium: (Optional) web browser 0 [ SUB1 ] DietPi-Services > dietpi_controlled DietPi-Services | cron [. ] [.. ] [ .. ] [ .. ] [ .. ] [ OK ] DietPi-Services | dietpi_controlled : cron [ SUB1 ] DietPi-Set_Hardware > gpumemsplit (64) [ OK ] gpumemsplit 64 | Completed DietPi: Setting Timezone = Europe/Berlin [ INFO ] DietPi-Software | Setting Locale de_DE.UTF-8. Please wait [ SUB1 ] DietPi-Set_software > locale (de_DE.UTF-8) DietPi-Set_software | dpkg-reconfigure -f noninteractive locales [. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ .. ] [ ..] [ ..] [ .. ] [ .. ] [ .. ] [.. ] [.. ] [ .. ] [ .. ] [ OK ] DietPi-Set_software | dpkg-reconfigure -f noninteractive locales [ OK ] locale de_DE.UTF-8 | Completed [ INFO ] DietPi-Software | Setting Keyboard de. Please wait... DietPi-Software ───────────────────────────────────────────────────── Mode: Installation completed [ OK ] DietPi-Software | The system will now reboot. This completes the DietPi-Software installation. ``` ---

[Fourdee]

@Gokujo

Thanks for the logs, everything appears to have installed fine, without errors.

But I couldn't connect to enterprise wi-fi network. I had to use a simple WPA-PSK

Unfortunately I have no way of testing this currently. I'll reference your post to the following ticket: https://github.com/Fourdee/DietPi/issues/1549#issue-299475931 We'll take a look when we can.

As the original issue is now resolved, i'll mark this as closed. Please reopen if required.