Closed drudru closed 1 year ago
Yes, I developed this small PCB and the files are also on GitHub. Yes, you can plug this board into the motherboard, replacing the original 6502.
From: Dru Nelson @.> Sent: Wednesday, May 24, 2023 9:55 AM To: MicroCoreLabs/Projects @.> Cc: Subscribed @.***> Subject: [MicroCoreLabs/Projects] 40 pin dip breakout for MCL65 ? (Issue #19)
Hi, did you buy or make the 40 pin dip breakout that you would connect the jumper wires with? Just to be clear, this is the board that you inserted into the motherboard 40 pin dip sockets.
— Reply to this email directly, view it on GitHubhttps://github.com/MicroCoreLabs/Projects/issues/19, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AM4AVEIITVJ4QIOLREJXGX3XHY4PVANCNFSM6AAAAAAYNVGJG4. You are receiving this because you are subscribed to this thread.Message ID: @.***>
Sorry to ask, but which dir has the files for this pcb?
Oh sorry, you are referring to the MCL65 project, not the MCL65+ 🙂
I never made any PCB for this.. I just hand-wired and soldered my own little converter from the FPGA board to the 40-pin DIP.
From: Dru Nelson @.> Sent: Wednesday, May 24, 2023 11:08 AM To: MicroCoreLabs/Projects @.> Cc: MicroCore Labs @.>; Comment @.> Subject: Re: [MicroCoreLabs/Projects] 40 pin dip breakout for MCL65 ? (Issue #19)
Sorry to ask, but which dir has the files for this pcb?
— Reply to this email directly, view it on GitHubhttps://github.com/MicroCoreLabs/Projects/issues/19#issuecomment-1561716724, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AM4AVEJPXHFVLEWR26U2HDTXHZFBRANCNFSM6AAAAAAYNVGJG4. You are receiving this because you commented.Message ID: @.***>
Ah, that makes sense. I wasn't quite sure from the photos. Thank you.
Hi, did you buy or make the 40 pin dip breakout that you would connect the jumper wires with? Just to be clear, this is the board that you inserted into the motherboard 40 pin dip sockets.