issues
search
MiguelNSPA
/
ardupilot-mega
Automatically exported from code.google.com/p/ardupilot-mega
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
RC2_REV is not reversing servos
#931
GoogleCodeExporter
opened
9 years ago
2
Mission Planner Error-message
#930
GoogleCodeExporter
opened
9 years ago
2
Enhancement request
#929
GoogleCodeExporter
opened
9 years ago
2
APM Planner screen issues
#928
GoogleCodeExporter
opened
9 years ago
1
Mission Planer - Failed to process THR_ACCEL_P and THR_MID (System.NullReferenceException) after upgrade to 1.2.55
#927
GoogleCodeExporter
opened
9 years ago
6
Mission Planer - Units shown in graphs
#926
GoogleCodeExporter
opened
9 years ago
0
GCS Failsafe Problem ArduPlane v.2.73
#925
GoogleCodeExporter
opened
9 years ago
0
RAW Data to readable Values
#924
GoogleCodeExporter
opened
9 years ago
0
Add parameter to inhibit failsafe in AUTO mode
#923
GoogleCodeExporter
opened
9 years ago
0
WP's delete button is strange when using MP in MONO
#922
GoogleCodeExporter
opened
9 years ago
0
MP 1.2.53 - fails to resolve DNS for firmware, updates MP just fine.
#921
GoogleCodeExporter
opened
9 years ago
0
HB-01 bluetooth module connects ONLY if powered AFTER 15 secs of pressing the connect button on APM
#920
GoogleCodeExporter
opened
9 years ago
4
APM 2.5/fw 2.73: RTL and Loiter do not work as advertised
#919
GoogleCodeExporter
opened
9 years ago
0
Alt Problems in FBW and Stab
#918
GoogleCodeExporter
opened
9 years ago
0
One or two crashes where the application stopped responding: (v1.2.50)
#917
GoogleCodeExporter
opened
9 years ago
0
Program crash during tlog playback:
#916
GoogleCodeExporter
opened
9 years ago
0
What is the scaling factor for the RAW gyro data that we get from the data logger
#915
GoogleCodeExporter
opened
9 years ago
0
Reset AUTO mission if enabled after competion.
#914
GoogleCodeExporter
opened
9 years ago
0
Red LED start and keeps blinking after APM boot / no ESC response
#913
GoogleCodeExporter
opened
9 years ago
2
APM firmware error on mission planner when trying to load a previous version of firmware
#912
GoogleCodeExporter
opened
9 years ago
0
Bixler 2 losing height
#911
GoogleCodeExporter
opened
9 years ago
0
FBW-b no change target air speed
#910
GoogleCodeExporter
opened
9 years ago
0
failsafe triggers during landing when in stabilize and locks out RC controll
#909
GoogleCodeExporter
opened
9 years ago
0
PID: derivative on measurement
#908
GoogleCodeExporter
opened
9 years ago
0
Getting px4uploader errors when trying to compile source
#907
GoogleCodeExporter
opened
9 years ago
2
Mission Planner after 1.2.35 stopped working with Mono
#906
GoogleCodeExporter
opened
9 years ago
2
1.2.43 won't run in MONO, crashes.
#905
GoogleCodeExporter
opened
9 years ago
0
Can't connect to 3DR after BAUD rate change
#904
GoogleCodeExporter
opened
9 years ago
0
APM Planner waypoint list issue
#903
GoogleCodeExporter
opened
9 years ago
0
Showing Error: Failed to get Firmware list
#902
GoogleCodeExporter
opened
9 years ago
0
Arduino 1.0.3 Not Compiling
#901
GoogleCodeExporter
opened
9 years ago
0
APM resets default RTL Altitude in Standard Params page of Arducopter
#900
GoogleCodeExporter
opened
9 years ago
2
Could not load type 'System.Configuration.Internal.ConfigurationManagerInternal
#899
GoogleCodeExporter
opened
9 years ago
3
logfile download via radio
#898
GoogleCodeExporter
opened
9 years ago
0
Conf -> Planner -> Vid dropdowns always blanked when one leaves tabs and returns.
#897
GoogleCodeExporter
opened
9 years ago
0
MissionPlanner wil not run on W7 PC
#896
GoogleCodeExporter
opened
9 years ago
0
Camera trigger distance to be user adjustable
#895
GoogleCodeExporter
opened
9 years ago
0
Draw a circle of defined radius around home to set maximum distance.
#894
GoogleCodeExporter
opened
9 years ago
0
After prefetching map data, mission planner moves map around and sets waypoint.
#893
GoogleCodeExporter
opened
9 years ago
0
APM 2.5 can't power up with battery, just with USB-cabel
#892
GoogleCodeExporter
opened
9 years ago
0
APM Planner showing COM ports wrong.
#891
GoogleCodeExporter
opened
9 years ago
3
Missionplanner 1.2.36 not working on Win xp.
#890
GoogleCodeExporter
opened
9 years ago
0
Mission Planner HUD and Closing App issue on Windows 8 Atom Process tablet
#889
GoogleCodeExporter
opened
9 years ago
0
Low performance
#888
GoogleCodeExporter
opened
9 years ago
0
Unable to load or see any maps
#887
GoogleCodeExporter
opened
9 years ago
5
Onboard logging does not works
#886
GoogleCodeExporter
opened
9 years ago
1
MSI error cannot install on drive other than C
#885
GoogleCodeExporter
opened
9 years ago
0
Problem with ArduPlane V2.70 and APM 2.5
#884
GoogleCodeExporter
opened
9 years ago
5
Control servo speed
#883
GoogleCodeExporter
opened
9 years ago
0
mah used
#882
GoogleCodeExporter
opened
9 years ago
0
Previous
Next