Open Willi-Billi opened 2 years ago
To start with, you really need a processor with a crystal, otherwise the main oscillator will drift during use (due to temperature and voltage changes) causing servo centers to move.
Mike
Dear Mike,
Now, it is correct, that the system must be stable and also allways the same servo center. But I see this smal arduino:
And for me it look not, that he has a external crystall. But my expirence with arduino boards are small. I look only for a easy converter for around 2 chanels and that i can configure in the script, what chanel I have on the ports.
Thanks Mike.
Kind regards Willi
Dear Mike,
Now, it is correct, that the system must be stable and also allways the same servo center. But I see this smal arduino:
[image: digispark.jpg] And for me it look not, that he has a external crystall. But my expirence with arduino boards are small. I look only for a easy converter for around 2 chanels and that i can configure in the script, what chanel I have on the ports.
Thanks Mike.
Kind regards Willi
Am So., 10. Juli 2022 um 23:40 Uhr schrieb MikeBland < @.***>:
To start with, you really need a processor with a crystal, otherwise the main oscillator will drift during use (due to temperature and voltage changes) causing servo centers to move.
Mike
— Reply to this email directly, view it on GitHub https://github.com/MikeBland/SbusToPWM/issues/7#issuecomment-1179804786, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOZSFHYNKZXVW54UCSHJB5DVTM7LZANCNFSM53EX2VGA . You are receiving this because you authored the thread.Message ID: @.***>
I'm looking for a project with smaler hardware like Attiny85 Digispark for a 4 channel SBus decoder and it must also be work with the RC cahnnel 9-12 or 13-16.
My issue is now, can we do this with this project code ?
If yes, can you give us user's a layout of the hardware and a example for the changes of the code ?
Thanks a lot.