Clarification on instruction page relating to "Quickstart"

[GoogleCodeExporter]

on this google code front page, there's a contribution by Ghosthb called 
"Quickstart".  Its great... but it seems to assume the user has my (s_mack) 9x 
programmer board.  Which I personally think is awesome!  But if the user 
doesn't have it, then step 2 ("Plug your radio into the usb. The power switch 
does not need to be on.") isn't going to make a lot of sense and will probably 
confuse/frustrate them.

Ideally for me (of course) would be an entry like so:

"If you have the SmartieParts 9x Programmer board, then plug your radio into 
the usb. The power switch does not need to be on. If you're using a different 
programmer then make sure you've connected it to your radio according to its 
instructions."

Honestly, I'm not trying to shamelessly promote... I honestly think it needs to 
be clarified.  Even omiting any reference to my board and a USB connection and 
just having: "Make sure you've connected your programmer to your radio 
according to its instructions." would be better (though the user might be like, 
"programmer?" so a link to an explanation or suggestions would be good).

Cheers.

 - Steven

Original issue reported on code.google.com by steven%c...@gtempaccount.com on 28 Dec 2010 at 5:19

[GoogleCodeExporter]

I do shamelessly promote :)

I also think your board is the best solution for the radio.  (hence the link :)

Original comment by erezra...@gmail.com on 30 Dec 2010 at 11:54

• Changed state: Fixed

[GoogleCodeExporter]

Cool.  Thanks!

Original comment by steven%c...@gtempaccount.com on 30 Dec 2010 at 6:21