search

MikeBland / mbtx

er9x/ersky9x radio firmware
GNU General Public License v2.0
148 stars 56 forks source link

Some USBASP programmers doesn't flash firmware. #21

Closed nppc closed 8 years ago

nppc commented 8 years ago

It's seems, that some versions of USBASP firmware need power cycle of the programmer before each use. But eepe uses USBASP programmer twice while flashing firmware to TX. First time it reads EEPROM, and right after reaiding eeprom, it starts writing... and fails on some USBASP.

So, as a workaround, can you please add a check box that can be unchecked to prevent EEPROM reading prior to flashing firmware?

Thanks a lot.

MikeBland commented 8 years ago

This will be in the next release/test version.

nppc commented 8 years ago

Oh, thank you Mike! :)

MikeBland commented 8 years ago

Test version (for Windows) posted here: http://openrcforums.com/forum/viewtopic.php?f=5&t=4598&p=64969#p64969

nppc commented 8 years ago

Ah, thanks! Probably can test it today late evening... Pavel

2016-05-25 12:49 GMT+02:00 MikeBland notifications@github.com:

Test version (for Windows) posted here: http://openrcforums.com/forum/viewtopic.php?f=5&t=4598&p=64969#p64969

— You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub https://github.com/MikeBland/mbtx/issues/21#issuecomment-221538391

nppc commented 8 years ago

Hi Mike! I have tested your test version of eepe with eeprom pre-read disabled and it works now with my usbasp.

Thanks a lot! will close my issue on github.

Pavel

2016-05-25 14:23 GMT+02:00 Pavel Palonen pavel.palonen@gmail.com:

Ah, thanks! Probably can test it today late evening... Pavel

2016-05-25 12:49 GMT+02:00 MikeBland notifications@github.com:

Test version (for Windows) posted here: http://openrcforums.com/forum/viewtopic.php?f=5&t=4598&p=64969#p64969

— You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub https://github.com/MikeBland/mbtx/issues/21#issuecomment-221538391