search

MikeBland / mbtx

er9x/ersky9x radio firmware
GNU General Public License v2.0
147 stars 56 forks source link

afhds2a telemetry not read correct value every frame so we get 0 on telemetry screen and I hear alarm #53

Closed macem closed 1 year ago

macem commented 2 years ago

I have turnigy 9xr pro with ersky9x r223 and frsky QX7 with erx9d-r222 and the same problem with telemetry in afhds 2a receivers fs-ia6B. This is only happened when I change model in tx and will connect with model. For RSSI and ExV i get for second frame no values, so on screen with telemetry I see zeros and my alarm all time turn on. But when I change model in tx and turn off tx and then turn on tx and will connect with model everything work fine.

MikeBland commented 2 years ago

I assume this is with a multiprotocol module? Does the problem occur if you have two models on the Tx, both already bound, and you then change models?

macem commented 2 years ago

Hi Mike yes with TX multimodule with new firmware, yes I have two models in Tx, and are bound. I turn on transmitter where I have selected one model, then I select second model and connect with telemetry and this problem exists. As a workaround after select second model I need to turn of Tx and turn on again.

MikeBland commented 2 years ago

Does the problem only occur if you do a bind after changing models, but works OK if you just change models without binding?

macem commented 2 years ago

Hi the problem occur without banding, sorry I corrected my comments.

macem commented 1 year ago

I upgraded to new firmware and it is working, so please close, seems before there was other r223 firmware with AFHDS2a debug