Additional sensors for neo

[danekasper]

There are a bunch of MQTT sensors pushes that are hidden behind the 'que' flag that seem to be the same in nimbus API for neo. Perhaps the neo has changed over the years, or is there another reason for this? eg.

if (_strSystemType == "que")
    {   MQTT.SendMessage(string.Format("homeassistant/sensor/actronque{0}compressorcapacity/config", strHANameModifier), "{{\"name\":\"{1} Compressor Capacity\",\"unique_id\":\"{0}-CompressorCapacity\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/compressorcapacity\",\"unit_of_measurement\":\"%\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.SendMessage(string.Format("homeassistant/sensor/actronque{0}compressorpower/config", strHANameModifier), "{{\"name\":\"{1} Compressor Power\",\"unique_id\":\"{0}-CompressorPower\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/compressorpower\",\"unit_of_measurement\":\"W\",\"device_class\":\"power\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.SendMessage(string.Format("homeassistant/sensor/actronque{0}outdoortemperature/config", strHANameModifier), "{{\"name\":\"{1} Outdoor Temperature\",\"unique_id\":\"{0}-OutdoorTemperature\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/outdoortemperature\",\"unit_of_measurement\":\"\u00B0C\",\"device_class\":\"temperature\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.SendMessage(string.Format("homeassistant/sensor/actronque{0}coilinlettemperature/config", strHANameModifier), "{{\"name\":\"{1} Coil Inlet Temperature\",\"unique_id\":\"{0}-CoilInletTemperature\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/coilinlettemperature\",\"unit_of_measurement\":\"\u00B0C\",\"device_class\":\"temperature\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.SendMessage(string.Format("homeassistant/sensor/actronque{0}fanpwm/config", strHANameModifier), "{{\"name\":\"{1} Fan PWM\",\"unique_id\":\"{0}-FanPWM\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/fanpwm\",\"unit_of_measurement\":\"%\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.SendMessage(string.Format("homeassistant/sensor/actronque{0}fanrpm/config", strHANameModifier), "{{\"name\":\"{1} Fan RPM\",\"unique_id\":\"{0}-FanRPM\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/fanrpm\",\"unit_of_measurement\":\"RPM\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.SendMessage(string.Format("homeassistant/switch/actronque{0}/controlallzones/config", strHANameModifier), "{{\"name\":\"Control All Zones\",\"unique_id\":\"{0}-CAZ\",\"device\":{{\"identifiers\":[\"{0}\"],\"name\":\"{2}\",\"model\":\"Add-On\",\"manufacturer\":\"ActronAir\"}},\"state_topic\":\"actronque{3}/controlallzones\",\"command_topic\":\"actronque{3}/controlallzones/set\",\"payload_on\":\"ON\",\"payload_off\":\"OFF\",\"state_on\":\"ON\",\"state_off\":\"OFF\",\"availability_topic\":\"{0}/status\"}}", Service.ServiceName.ToLower() + strDeviceNameModifier, strAirConditionerName, strAirConditionerNameMQTT, unit.Serial);
                    MQTT.Subscribe("actronque{0}/controlallzones/set", unit.Serial);
}

[MikeJMcGuire]

Next time I have access to test with a Neo - I'll see if there is any data reported by the Neo for those attributes.

[MikeJMcGuire]

I don't have a Neo to test it against, so may need some help with the testing. Can you post a comment to the Neo page about it and then I can contact you directly. https://blog.mikejmcguire.com/2021/02/11/actron-neo-and-home-assistant/