search

MikeS11 / ProtonPack

Arduino proton pack source code, schematics, design.
42 stars 14 forks source link

fuzzy on some details (pcb) #10

Open tankboyben opened 1 year ago

tankboyben commented 1 year ago

hi, where does the power go into the board? is it near audio (R3)? and is it 12v?

secondly what connectors should be on audio and R3?

PXL_20230301_133601836 PXL_20230301_133544147 MP

MikeS11 commented 1 year ago

Power should go into power main (Make sure your buck converter is outputting 5V before you plug in your controller), and you can use the same 12V rail to output to an external 12V amp (AMP PWR) for your speaker as well. I should have made it more clear around R3 but R3 is for a potentiometer for volume control. And The two left pin then are used for Audio Out.

Hope that helps!

[image: image.png]

On Sun, 5 Mar 2023 at 02:30, tankboyben @.***> wrote:

hi, where does the power go into the board? is it near audio (R3)? and is it 12v?

secondly what connectors should be on audio and R3?

[image: PXL_20230301_133601836] https://user-images.githubusercontent.com/13260832/222952564-72c04a65-6648-46dd-8c19-20481fb16c4c.jpg [image: PXL_20230301_133544147 MP] https://user-images.githubusercontent.com/13260832/222952567-86638ff1-015e-43a7-b0aa-c8df15e1810f.jpg

— Reply to this email directly, view it on GitHub https://github.com/MikeS11/ProtonPack/issues/10, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEFUSEC5I5LRSEHOQ3225P3W2RMKDANCNFSM6AAAAAAVQB36ZM . You are receiving this because you are subscribed to this thread.Message ID: @.***>

tankboyben commented 1 year ago

amazing, thank you :)

tankboyben commented 1 year ago

just wanted to add that your board didnt work unfortunately, the updated one by the other chap did, however on both yours and theirs, all the connectors are the wrong way round and will result in blowing up various components if things are plugged in in those orientations

MikeS11 commented 1 year ago

If you can be more specific it would be helpful. I've been using the design for a couple years now and everything works fine.

lockenschmuggler commented 1 year ago

Hi MikeS11, planning to order a pcb. Right now I am adjusting the eagle files to fit properly for KiCad. Therefore: Is there a chance for you to make a pic of your Powerpack and Wand PCBs? Would be appreciated. thus, since I have still some question-marks with regards to the pcb-layout. E.g.: there is a build-in potentionmeter. If I use an amp, this seems somehow redundant (maybe this is due to my lack of understanding). Same with audio out: Is this to be connected with the amp or with the boxes? As said before: support appreciated...

tankboyben commented 1 year ago

would love to know how you get on if you do get one, ive had trouble, all the connectors on the board are the wrong way round in regards to the polarity of all the wires i got i.e. this way red goes to ground and black goes to live, obviosly you can flip the connectors and resolder but then you have a few space issues, i need to get back onto it when i have time and try and get on working board but its not straightforward