It seems there is almost no support for the Rev A1 so I am opening this issue to reach out for help. I need to boot windows 10 ioT or windows 10 full version from a sd or usb stick which ever will work.
I have tried:
Making an SD card with the Windows ioT software with the minnowboard specific config
Making a bootable windows 10 install with rufus
Making a bootable Linux distro with Yumi
plugging to usb in the bottom and top port.
Every time the media device does show up in the mapping table but never boots to it.
I have Firmware Version 1.00, 0x4E278000 . Revison 1.02
So far the only thing that will boot is the ubuntu flavor the minnowboard came with and when I booted in I did "uname -m" and found it to be x86 which I suppose means I have a 32bit firmware.
When I went to update the firmware I followed the guide but when I ran the "XXXXXX.efi XXXXXX.bin" I got no echo output nor did the system reboot or show errors etc.
Troodon7
commented
5 years ago
It seems there is almost no support for the Rev A1 so I am opening this issue to reach out for help. I need to boot windows 10 ioT or windows 10 full version from a sd or usb stick which ever will work.
I have tried:
Every time the media device does show up in the mapping table but never boots to it.
I have Firmware Version 1.00, 0x4E278000 . Revison 1.02
So far the only thing that will boot is the ubuntu flavor the minnowboard came with and when I booted in I did "uname -m" and found it to be x86 which I suppose means I have a 32bit firmware.
When I went to update the firmware I followed the guide but when I ran the "XXXXXX.efi XXXXXX.bin" I got no echo output nor did the system reboot or show errors etc.