Mechanical dimensions for Turbot Dual-Ethernet

MinnowBoard-org / bugs-and-help

Ask QUESTIONS here. MinnowBoard.org issue and get help submission. See README for use.

14 stars 2 forks source link

Mechanical dimensions for Turbot Dual-Ethernet #69

Closed BrianOttaway closed 7 years ago

BrianOttaway commented 7 years ago

As submitted in direct MB.org email.

I have a question regarding the board layout of one of your products. A colleague of mine ordered a board and I need to design a plate that it will mount to. I took some rough dimensions just to verify it will fit where we want it but I will need precise information about the 6 mounting holes on this unit to ensure proper fit between this board and my plate. I have a serial number (S/N D901xx-xxxx) and also have attached a picture. Could you please pass this request on to the appropriate person?

BrianOttaway commented 7 years ago

Turbot Dual-Ethernet F300 gerbers are located here: https://github.com/MinnowBoard-org/design-files/tree/master/minnowboard-turbot-dual-E-Dual-and-Quadcore/F300_R201 You can view there with a gerber viewer, or output to autocad .dxf. @MinnowBoardHW might get to it before I do.

minnowboard commented 7 years ago

I would recommend gerbv, which is a great open-source gerber viewer: http://gerbv.geda-project.org/. Let us know if you need anything else.

lsoika commented 7 years ago

DXF added here: https://github.com/MinnowBoard-org/design-files/tree/master/minnowboard-turbot-dual-E-Dual-and-Quadcore/F300_R201

BrianOttaway commented 7 years ago

Perfecto. Thx @lsoika . Closing this thread.