Z Wobble X and Ender 3 v2 Issue

MirageC79 / Interfaces-for-WobbleX-integration

CADs and STLs that can be adapted to various 3D printers in order to benefit from the best Z wobble management system.

GNU General Public License v3.0

401 stars 35 forks source link

Z Wobble X and Ender 3 v2 Issue #34

Open bobster316 opened 9 months ago

bobster316 commented 9 months ago

I am using the official Z wobble x kit purchased from Aliexpress. The issue I have can be est described in a video i captured when the issue happens. https://youtu.be/8Wd88ihQccs

As the printer homes, the z axis lowers and while lowering near the bed, the z wobble x serperates and the nozzle hits the bed.

Can you please advise what could be causing the issue.

Thanks

leecuk commented 9 months ago

The ball bearing don't stack on top of each other like you have it, your bottom plate should be 90 degrees rotated. You want the ball bearings riding in the needle rollers top and bottom, not on the magnets.

Also it looks like you might be using dual screws? - This is not recommended, if you want to use dual screws, you'll need to come up with something to pull the two pieces together - some people use rubber bands/o-rings I believe.

@bobster316

Compare yours to mine -