Test of plain image for factory delivery (2019-06-02)

[MaStr]

Hi Miyö, please give the latest plain image a shot.

Those are located @ /TheWrong/Plain images/2019-06-02

What is new/special to those images? No bigger changes, like we discussed, I only added a more concrete image tag to the .bin file. You can now find in /etc/pbx_custom_image

PBX_auto_Image_2.7 INSTALL_TARGET=plain

So you can verify after the installation, what the base image was.

Ok, how to test? On a brand new router:

• Reflash via Gli.net firmware , uncheck "keep settings"

Reflash from a working PirateBox/the.Wrong setup

• Put device offline
• Remove USB stick, bring to your computer,
• Get a Backup of everything.
• Remove all files & folders
• Create only the folder called auto_flash
• Place the plain image there
• Unmount safety
• put it back to your router and boot

After the reflash, you should have a steady power led. If you login via SSH to 192.168.1.1, you should find the lines above in /etc , then the reflash to the plain image worked.

Later you can place again a PirateBox .bin file to auto_flash and reinstall.

[MaStr]

If the plain image is working find, we can send it over to Gli.net for testing on their side..

[Miyitus]

ok! I'm on it rn

[MaStr]

Are there any open points here? If no, we can close this