Slipping with CoursePlay

[alpha117]

Good Morning

Just started using GB and have an issue with tractors slipping when using CoursePlay, as the 4wd/diff locks are not engaged. Not sure how to fix this

Any help would be good

Thanks Clive

[alpha117]

thanks let you know

[alpha117]

OK, looks like the slipping is a Seasons issue, wet ground no traction, that is good and GB reflects that. All good Now, when in courseplay I only get AI(M) and unless I baby sit a change gear for them, the Cp will not get up any change in gradient, which defeats the objective of CP.

Have I missed something, to allow GB to go into Auto, when starting CP?

I'm liking GB a lot, just need to understand the different functions and how they work, hopefully this issue is a 'user' issue and not GB

Can you also confirm that GB and direct drive MOD work OK together Thanks

[Mogli12]

You can either set the gearbox into simplified mode before starting courseplay or you go to the settings screen and choose "simple" for the "hired worker" setting.

[alpha117]

Cool, thank

[alpha117]

just finished seeding on the west coast, very good indeed. Like it a lot

If you want any testing then let me know

cheers

[alpha117]

v.76, selected 'simple for AI, then started CP got AI(M) B4, stayed in that gear.

Sowing TWC field #15

Should the AI change gears?

Select 'off' for AI and no movement at all in CP Select 'Auto Power shift' you get AI(M) A4, goes at 4.9km/h slow

Would it be possible to compare current and target RPM and say

If Target RPM is greater than current RPM increase gear(+1) If target RPM is less than current RPM then decrese gear(-1)

[alpha117]

Good Morning

More questions!

1. GearBox: Reality Switch
2. GearBox: Limiter
3. GearBox: Fixed ratio

What do the different options of the above achieve

Also you can change from Automatic/manual via the GB options screen, how can you do this without going to the options screen?

Thanks

[Mogli12]

ad 1: here you can control what is shifted automatically if you are in simplified mode ad 2: this enables the speed limiter. You have to use the normal keys to accelerate and brake. But you cannot drive faster than the cruise control speed ad 3: this is for CVTs only (e.g. Fendt Vario). You can choose a fixed gear ratio

[alpha117]

Thanks Stefan

All good

[alpha117]

We do I find/see the changelog for each version?

[Mogli12]

code->commits

[alpha117]

using V2177 hired worker :CVT with courseplay, spot on, good one.

Now see there is 2178, you are very quick. Need to see what happens when GB is manual and Hired worker is CVT, should change when in CP and then go back to manual when out of CP?

[Mogli12]

Hi alpha117, What is the status of this issue? Regards,

[alpha117]

Hi

Yep, seems OK now

Thanks