MoneroOcean
commented
6 years ago Can you please copy paste output from the miner that lead to its crash?
Open lost-bro opened 6 years ago
MoneroOcean
commented
6 years ago Can you please copy paste output from the miner that lead to its crash?
lost-bro
commented
6 years ago Good day MO
Here is a screenshot of just before it crashes. It will load all of the GPUs and then arrive at the point where the program prints out 'Algo Change' and then close the window.
Xmrig-MO-2.7.3-beta (Win10-64Bit-Radeon-Software-Adrenalin-Edition-18.4.1-Apr26 running x12 rx550s) will run the --calibrate-algo flag with success. The calibration test is run for all algos and all tests are completed and the results are written to the .json file. The miner will run and seems to be functioning properly.
The problem is when I need to restart the miner. I restart the miner as always running OverdriveNtool first and then letting the miner start up. The miner opens the window and begins to load the configuration for the first algo. It seems to complete the loading of the first algo and then when it switches algos, that is when it crashes.
It did this every time I restarted the miner. If I let it run after if finishes the initial calibration tests (w/o stopping and restarting the miner), it keeps running and does not crash.
The miner is using the same config.json that it produced during the self-calibration tests.
The rig is stable when mining cn1 with the Xmrig-2.7.1-beta and always starts up w/o crashing when following the same startup protocol.
On a side note: I installed the same Xmrig-MO-2.7.3-beta on my other rig (x6 rx580s) which is still running the Blockchain driver from Aug 2017. This rig runs fine and does not suffer from the crashes during restart. So I am fairly certain that it is NOT the builds fault. It was a bitch to get the x12 rx550s rig up and running........ not looking forward to have to experiment with other drivers........ hope this in NOT a driver related issue..