Enable true bridge mode for AT&T U-Verse and pfSense (this is a fork of an original repository https://github.com/aus/pfatt. Since it is not available anymore, I'll do my best to maintain a copy for people that still need a bypass)
IPv6 WAN (#30): add instruction to request only an IPv6 prefix. Without this setting, the appliance will try to request an IPv6 address for itself and will fail (AT&T does not hand out addresses to routers), leaving the appliance without an IPv6 connection for itself. Toggling this on will allow the appliance to access the IPv6 internet.
DHCPv6 Server & RA (#29) : Correct the instructions for Prefix Delegation Range and Prefix Delegation Size. Previously the instructions stated that the user should set the prefix delegation range to 64, whereas that should be left blank and prefix delegation size should be set to 64.
Added a line after the Services > DHCP Server & RA section reminding users that these instructions will need to be completed for each LAN interface that they want to have IPv6 access.
This commit contains:
64
, whereas that should be left blank and prefix delegation size should be set to64
.