search

Mordenkainen / Technomancy

Magic and Science, what can go wrong
15 stars 8 forks source link

Hippie Engine #154

Closed Mattabase closed 9 years ago

Mattabase commented 9 years ago

It does not producer power when give a redstone signal, and crashed when putting a conduit over it.

https://dl.dropboxusercontent.com/u/15990261/ShareX/2015/09/crash-2015-09-07_22.48.33-server.txt

You also can not rotate it.

Mordenkainen commented 9 years ago

I suspect it's because of the Beta version of Ender IO, since it's actually Ender IO crashing there.

The Dynamo definitely implements this interface, so I'm not sure why EIO is screaming about it. Is it possible for your to check one of the other Technomancy Dynamos to see if they behave the same way? Also would it be possible for you to check a different energy transport, like an Energy Duct or some such?

What tool are you trying to rotate it with?

Mattabase commented 9 years ago

Use all the wrenches I had installed. TE to BC

The crash has since been figured out, one of the mods installed was using a really old COFH APi.

I will give it shot again, with better detail as to rotating this time. Thanks for the response. =)

Mattabase commented 9 years ago

https://dl.dropboxusercontent.com/u/15990261/ShareX/2015/09/2015-09-08_13-12-58.mp4

Engine stuff

Mattabase commented 9 years ago

The Essentia Dynamo seems to work.

Mordenkainen commented 9 years ago

Ok, the video helps a lot... the dynamo will only rotate to connect to valid power destinations. So, in your case you only have the single capacitor, there is no other "valid" orientation to rotate to.

Also, the dynamo draws power directly from mana pools on the same y level as the dynamo. No mana spreader is needed. Try moving the dynamo down to the same level as the pool, get rid of the spreader, and see if that works.