Import from PrusaSlicer fails

[ackerthehacker2]

Describe the bug Will not read in Prusaslicer 2.4 .ini profile files. Error message cannot read file of undefined (error reading split)

To Reproduce Steps to reproduce the behavior: New Profile-> Import -> go to screen to drag in a ini file from Prusaslicer (~/Library/Application Support/PrusaSlicer

Expected behavior create profile

Screenshots

Operating System (please complete the following information): Mac OS 12

wont let me attach file:

generated by PrusaSlicer 2.4.2-rc2+x64 on 2022-04-26 at 20:34:45 UTC

avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic bottom_solid_layers = 10 bottom_solid_min_thickness = 0.5 bridge_acceleration = 300 bridge_angle = 0 bridge_flow_ratio = 1.15 bridge_speed = 15 brim_separation = 0.1 brim_type = outer_only brim_width = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.PRINTER_VENDOR_PRUSA3D./ and printer_notes=~/.PRINTER_MODEL_MK3./ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 0 draft_shield = disabled elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 20 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 15% fill_pattern = gyroid first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 20 gcode_comments = 1 gcode_label_objects = 1 gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 800 infill_anchor = 2.5 infill_anchor_max = 12 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 30 inherits = 0.05mm ULTRADETAIL @MK3 interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.05 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 4 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filenamebase}{layerheight}mm{filamenttype[0]}{printermodel}{print_time}.gcode overhangs = 1 perimeter_acceleration = 300 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 30 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.15 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 skirts = 1 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 30 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = 0 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.33 support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 80% support_material_pattern = rectilinear support_material_spacing = 1.5 support_material_speed = 30 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 50 support_material_with_sheath = 0 support_material_xy_spacing = 60% thick_bridges = 0 thin_walls = 0 threads = 16 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_speed = 20 top_solid_layers = 15 top_solid_min_thickness = 0.7 travel_speed = 180 travel_speed_z = 12 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 125 xy_size_compensation = 0