USB MIDI support for other MIDI Controlers

[tomassch]

Dear fellows,

I wanted to try out Dekrispator on my STM board, controlling it with my CME MIDI Controller.

I couldn't get any response from the controller. With GDB I could see that it would always give me "unrecognized device".

After some investigation, I found out that my controller has two interface descriptors. The first is some audio interface (maybe to send audio back from a hypothetical usb synth?) and the second is the real midi interface.

So I had to make changes in two places: 1) .../Dekrispator/USB/usbh_conf.h around line 48

define USBH_MAX_NUM_INTERFACES 1

Then obviously it would not decode my second interface. I just changed it to:

define USBH_MAX_NUM_INTERFACES 2

2) Now I had to tell Dekrispator to get data from that second interface: .../Dekrispator/USB/MIDIstream_class/usbh_midi_core.c In function USBH_MIDI_InterfaceInit, whenever there was a Itf_Desc[0][0], I changed to Itf_Desc[interfaceToUse][0]

interfaceToUse is a constant int = 1.

Next step is making this selection automatic (don't want to mess with the support for the Korg Controller).

I am gonna request to pull after I reorganize my code (and maybe make the interface selection automatic).

Very nice project to work with!

PS. Compiling all in Ubuntu 12.10, running make from the Release dir. Debugging with GDB/Emacs.

[MrBlueXav]

Great ! I'm so happy someone gets interest in Dekrispator's code ! It would be marvellous if you could improve that minimalistic USB driver for which I spent a lot of time. But understanding USB arcanes was a hard stuff for me as I'm not a pro programmer... Sincerely, Xavier

[iRet]

Hi, guys. @MrBlueXav I've also tried few you projects, and yes with CME device too, It doesn't work for me. BTW, thank you for a great work! I really appreciate this. I want to build a synth based on discovery board for a while. ARM programming looks a bit complex after AVR(especially) arduino. Currently I've occupied and have no time, but in my plans integrate this board to

Thanks again and respect to you!

[tomassch]

Hi!

@MrBlueXav I will try to make the midi flexible, so that we do not have to change the code when we use different synths. Supporting full USB midi will be difficult because our little board doesn't have an OS and GUIs. For example, when I connect the CME to my linux machine, I am given a list with all the interface available, and then route them to the synth I want (using "jack"). We cannot do this in the discovery board, so maybe we will have to accept any incoming midi message from all midi interfaces. Should not be a problem I think.

I am also taking a look at the audio code. I changed BUFF_LEN_DIV_4 all the way down to 1, and it still plays without glitching (slow usb recognition though, busy CPU). Means that we can achieve a very low latency, more than enough for fast keyboard playing.

I have some string physical modeling code, I will add it and we can play some tunes along with the sequencer :)

@iRet What a cool synth! That would be really awesome to play on stage!

[iRet]

Hi, @tomassch

Can you please explain what did you do to get "unrecognized device" message in gdb? I'm noob with this stuff. Starting st-util then arm-none-eabi-gdb. Connecting to localhost, and type continue.

I'm on a mac, it was really hard to get working environment here. Flashing via st-flash binary file. Project won't compile as is, however another code compiling well even another Xavier's project with Makefile :) Will check further.

So, I've tried to connect Novation X-station and send some midi messages according to mapping from Resources folder. Nothing...

BTW, Dekrispator sound pretty good!

[iRet]

Finally played a bit with paths in .mk files to .d and that's it. Not sure it's a right way, but for me build from console much simpler than config eclipse :)

[tomassch]

awesome progress!

did it work with the novation without changing the interface number in the midistream code?

about the device unrecognized in gdb, I made a break point in the line that calls the "device unrecognized" function. then the code would always stop there when running.

yesterday I implemented noteOn noteOff functionality, and put it to test with some fast bach inventions :)

soon gonna commit the code. On Aug 9, 2014 2:34 AM, "Artyom Nikolaev" notifications@github.com wrote:

Finally played a bit with paths in .mk files to .d and that's it. Not sure it's a right way, but for me build from console much simpler than config eclipse :)

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51633229.

[iRet]

Oh, got it. I'm using simple text editors, so no built-in debugger for me. Not sure if it will work this (https://github.com/iRet/Dekrispator/blob/62ecff120d248c21b7c607226f0fd81d7e94268d/USB/MIDIstream_class/usbh_midi_core.c#L95-L153) way still no luck in novation and simple cme device but i'm not sure it last on have any intersections with mapped cc, as for novation I've tried to change CC13 and all default. Novation has a bunch of interfaces:

    | |   |   +-o XStation@1d100000  <class IOUSBDevice, id 0x100013d63, registered, matched, active, busy 0 (1551 ms), retain 23>
    | |   |     +-o IOUSBCompositeDriver  <class IOUSBCompositeDriver, id 0x100013d67, !registered, !matched, active, busy 0, retain 4>
    | |   |     +-o XStation@0  <class IOUSBInterface, id 0x100013d68, registered, matched, active, busy 0 (171 ms), retain 8>
    | |   |     +-o XStation@1  <class IOUSBInterface, id 0x100013d69, registered, matched, active, busy 0 (160 ms), retain 9>
    | |   |     | +-o IOUSBInterfaceUserClientV3  <class IOUSBInterfaceUserClientV3, id 0x100013d78, !registered, !matched, active, busy 0, retain 9>
    | |   |     +-o IOUSBInterface@2  <class IOUSBInterface, id 0x100013d6a, registered, matched, active, busy 0 (679 ms), retain 8>
    | |   |     | +-o NovationUSBAudioDevice  <class NovationUSBAudioDevice, id 0x100013d7d, registered, matched, active, busy 0 (1 ms), retain 7>
    | |   |     |   +-o NovationUSBAudioEngine  <class NovationUSBAudioEngine, id 0x100013d7e, registered, matched, active, busy 0 (1 ms), retain 9>
    | |   |     +-o IOUSBInterface@3  <class IOUSBInterface, id 0x100013d6b, registered, matched, active, busy 0 (166 ms), retain 10>
    | |   |     +-o IOUSBInterface@4  <class IOUSBInterface, id 0x100013d6c, registered, matched, active, busy 0 (161 ms), retain 10>
    | |   |     +-o IOUSBInterface@5  <class IOUSBInterface, id 0x100013d6d, registered, matched, active, busy 0 (171 ms), retain 9>
    | |   |     | +-o IOUSBHIDDriver  <class IOUSBHIDDriver, id 0x100013d98, registered, matched, active, busy 0 (5 ms), retain 11>
    | |   |     |   | +-o CMUSBDevice  <class com_orderedbytes_ControllerMate_driver_USBDevice, id 0x100013d9c, registered, matched, active, busy 0 (0 ms), retain 10>
    | |   |     |   |   +-o CMUSBDevicesUserClient  <class com_orderedbytes_ControllerMate_driver_USBDeviceUserClient, id 0x100013f13, !registered, !matched, active, busy 0, retain 5>

[tomassch]

gdb runs on the command line, so you can still use your text editor. to set a breakpoint in line 1234 of foo.c you type:

break foo.c:1234 continue

search for a gdb tutorial, it will give you magic powers in a short time.

and about this novation ctrlr, it looks like a lot of interfaces! tomorrow morning ima take a look (and commit some organized code, I promise :) ). On Aug 9, 2014 4:01 AM, "Artyom Nikolaev" notifications@github.com wrote:

Oh, got it. I'm using simple text editors, so no built-in debugger for me. Not sure if it will work this ( https://github.com/iRet/Dekrispator/blob/62ecff120d248c21b7c607226f0fd81d7e94268d/USB/MIDIstream_class/usbh_midi_core.c#L95-L153) way still no luck in novation and simple cme device but i'm not sure it last on have any intersections with mapped cc, as for novation I've tried to change CC13 and all default. Novation has a bunch of interfaces:

| |   |   +-o XStation@1d100000  <class IOUSBDevice, id 0x100013d63, registered, matched, active, busy 0 (1551 ms), retain 23>
| |   |     +-o IOUSBCompositeDriver  <class IOUSBCompositeDriver, id 0x100013d67, !registered, !matched, active, busy 0, retain 4>
| |   |     +-o XStation@0  <class IOUSBInterface, id 0x100013d68, registered, matched, active, busy 0 (171 ms), retain 8>
| |   |     +-o XStation@1  <class IOUSBInterface, id 0x100013d69, registered, matched, active, busy 0 (160 ms), retain 9>
| |   |     | +-o IOUSBInterfaceUserClientV3  <class IOUSBInterfaceUserClientV3, id 0x100013d78, !registered, !matched, active, busy 0, retain 9>
| |   |     +-o IOUSBInterface@2  <class IOUSBInterface, id 0x100013d6a, registered, matched, active, busy 0 (679 ms), retain 8>
| |   |     | +-o NovationUSBAudioDevice  <class NovationUSBAudioDevice, id 0x100013d7d, registered, matched, active, busy 0 (1 ms), retain 7>
| |   |     |   +-o NovationUSBAudioEngine  <class NovationUSBAudioEngine, id 0x100013d7e, registered, matched, active, busy 0 (1 ms), retain 9>
| |   |     +-o IOUSBInterface@3  <class IOUSBInterface, id 0x100013d6b, registered, matched, active, busy 0 (166 ms), retain 10>
| |   |     +-o IOUSBInterface@4  <class IOUSBInterface, id 0x100013d6c, registered, matched, active, busy 0 (161 ms), retain 10>
| |   |     +-o IOUSBInterface@5  <class IOUSBInterface, id 0x100013d6d, registered, matched, active, busy 0 (171 ms), retain 9>
| |   |     | +-o IOUSBHIDDriver  <class IOUSBHIDDriver, id 0x100013d98, registered, matched, active, busy 0 (5 ms), retain 11>
| |   |     |   | +-o CMUSBDevice  <class com_orderedbytes_ControllerMate_driver_USBDevice, id 0x100013d9c, registered, matched, active, busy 0 (0 ms), retain 10>
| |   |     |   |   +-o CMUSBDevicesUserClient  <class com_orderedbytes_ControllerMate_driver_USBDeviceUserClient, id 0x100013f13, !registered, !matched, active, busy 0, retain 5>

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51644167.

[iRet]

Nice, thanks! I've just added debug led messages. It looks like this method called few times. And first runs works and receive my current values. But then it switched to wrong interface. Looks i'm wrong somewhere, but anyway good results :) will look further. Looking forward for your commit :+1:

[iRet]

That's probably few interfaces that's determine this conditions:

if((pphost->device_prop.Itf_Desc[iface].bInterfaceClass == USB_AUDIO_CLASS) && \
   (pphost->device_prop.Itf_Desc[iface].bInterfaceSubClass == USB_MIDISTREAMING_SubCLASS))

Looking for how-to determine which one is right by additional attributes. DAWs did it somehow :)

[tomassch]

DAWs let you choose the interface you want, in the GUI. Since we dont have GUI capabilities in our board, we have to choose automatically.

I was thinking about sweeping all interfaces with a for loop, and sticking with the first interface that has subclass == 3.

of course, on more elaborate keyboards we might be loosing some midi controls with this. On Aug 9, 2014 1:10 PM, "Artyom Nikolaev" notifications@github.com wrote:

That's probably few interfaces that's determine this conditions:

if((pphost->device_prop.Itf_Desc[iface].bInterfaceClass == USB_AUDIO_CLASS) && \ (pphost->device_prop.Itf_Desc[iface].bInterfaceSubClass == USB_MIDISTREAMING_SubCLASS))

Looking for how-to determine which one is right by additional attributes. DAWs did it somehow :)

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51676560.

[iRet]

Yep, but anyway it knows what is audio and what is midi. I'm describing ableton live behaviour. What about to allow switching by blue button in normal not demo mode? We also need some visual feedback like blinking on input packets.

[tomassch]

ableton uses the midi subclass field to tell midi apart from audio. if its 0x03 then its midi.

we can support this using the buttons

another ideia is sweeping all interfaces, and accepting all midi messages from all interfaces. since we are making a synth (and not daw) that would be the behavoiur expected by the user (IMHO). On Aug 9, 2014 1:53 PM, "Artyom Nikolaev" notifications@github.com wrote:

Yep, but anyway it knows what is audio and what is midi. I'm describing ableton live behaviour. What about to allow switching by blue button in normal not demo mode? We also need some visual feedback like blinking on input packets. On Aug 9, 2014 12:47 PM, "tomassch" notifications@github.com wrote:

DAWs let you choose the interface you want, in the GUI. Since we dont have GUI capabilities in our board, we have to choose automatically.

I was thinking about sweeping all interfaces with a for loop, and sticking with the first interface that has subclass == 3.

of course, on more elaborate keyboards we might be loosing some midi controls with this. On Aug 9, 2014 1:10 PM, "Artyom Nikolaev" notifications@github.com wrote:

That's probably few interfaces that's determine this conditions:

if((pphost->device_prop.Itf_Desc[iface].bInterfaceClass == USB_AUDIO_CLASS) && \ (pphost->device_prop.Itf_Desc[iface].bInterfaceSubClass == USB_MIDISTREAMING_SubCLASS))

Looking for how-to determine which one is right by additional attributes. DAWs did it somehow :)

— Reply to this email directly or view it on GitHub < https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51676560>.

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51677184.

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51677270.

[iRet]

Gather midi input messages all sounds good.

Behaviour you described in previous message it exactly what I did in my commit. We have a loop and break as soon as found matching device. If found nothing touch blue light and return fail code. In practice when I tweaking parameters I see blue light linking on every event and it really changes synthesis parameters as expected but after few changes about 10 it stops receive anything at all. I'm curious how this code can cause this behaviour. It looks like it called on every message.

[tomassch]

oh, nice!

this looks like the behaviour I was getting with an usb<->midi cable. it would work for some seconds and then stop. I am out of town now, gonna check end of sunday On Aug 9, 2014 2:04 PM, "Artyom Nikolaev" notifications@github.com wrote:

Gather midi input messages all sounds good.

Behaviour you described in previous message it exactly what I did in my commit. We have a loop and break as soon as found matching device. If found nothing touch blue light and return fail code. In practice when I tweaking parameters I see blue light linking on every event and it really changes synthesis parameters as expected but after few changes about 10 it stops receive anything at all. I'm curious how this code can cause this behaviour. It looks like it called on every message.

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51677452.

[iRet]

I think we should move searching code outside of USBH_MIDI_InterfaceInit. Just leave a variable here which was defined after USB init (device was connected). But not sure where to place it for now. Have a nice day!

Just found interesting place at void USBH_USR_Configuration_DescAvailable It also has commented check code.

[iRet]

@tomassch you meant you was getting same with an usb<->midi cable when in code was hardcoded interface number? If yes this is weird, it means problem not in search interface code.

[tomassch]

yeah, but I barely tested that interface. did not investigate seriously On Aug 10, 2014 2:21 AM, "Artyom Nikolaev" notifications@github.com wrote:

@tomassch https://github.com/tomassch you meant you was getting same with an usb<->midi cable when in code was hardcoded interface number? If yes this is weird, it means problem not in search interface code.

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-51692874.

[MrBlueXav]

I've discovered that Mr Thorsten Klose has now a working USB midi host driver : http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fmios32%2FSTM32F4xx%2Fmios32_usb_midi.c It is part of his MIOS32 operating system for STM32F4 ( for personal non-commercial use only). See also his sites : uccaps.de and midibox.org In that file, the function USBH_InterfaceInit(USB_OTG_CORE_HANDLE pdev, void phost) has the loop for searching a midi interface in the connected device...

[Reggi3]

How are you guys getting on with the usb midi host driver? I tried the .hex file today and I can't get any response from 4 different midi devices, emu x-49 keyboard, arturia minilab keyboard and 2 arduino controllers, 1 using moco-lufa midi firmware, the other using 'teeonardu', teensy IDE support for arduino leonardo boards. Had you thought about providing serial input as a method to change settings? That would give another incredibly simple way to access them, don't need to change the messages, as midi is serial at 31250 baud.

[Reggi3]

@MrBlueXav @tomassch Here's what I've found so far, I used usbpcap and wireshark, usbpcap to capture the usb packets of my keyboard, including unplugging and replugging it in, then moving some encoders. I then opened the .pcap file in wireshark and had a look for the midi messages, this gave me the device and the endpoint, my endpoint was 81 (unless I've made a mistake), I changed the code using tomassch's original 'interfacetoUse' fix and changing the endpoint to 81 and I now have a working deskriptor :+1:

I think we need to look at the endpoints too (I know very little about usb) as well as the device that's being used.

[tomassch]

very good to hear that it works in yet another controller.

i am all about to make it flexible, auto detecting the controller parameters.

mrBlueXav suggested using some other people's code to improve the usb interface. On Nov 13, 2014 1:06 PM, "Reggie" notifications@github.com wrote:

@MrBlueXav https://github.com/MrBlueXav @tomassch https://github.com/tomassch Here's what I've found so far, I used usbpcap and wireshark, usbpcap to capture the usb packets of my keyboard, including unplugging and replugging it in, then moving some encoders. I then opened the .pcap file in wireshark and had a look for the midi messages, this gave me the device and the endpoint, my endpoint was 81 (unless I've made a mistake), I changed the code using tomassch's original 'interfacetoUse' fix and changing the endpoint to 81 and I now have a working deskriptor [image: :+1:]

I think we need to look at the endpoints too (I know very little about usb) as well as the device that's being used.

— Reply to this email directly or view it on GitHub https://github.com/MrBlueXav/Dekrispator/issues/1#issuecomment-62838902.

[Reggi3]

I know very little about usb at all, I'm surprised I got it working. When I first installed the original firmware, it didn't work at all, then I tried your code tomassch and that didn't work, I didn't get any blue lights at all but with my changes it saw the device and would work for a very short time (10-20 seconds) and stop working, then the usb host would start to loop resetting the keyboard.

My solution was to unplug the stm32F4 from my PC and directly into a usb apple phone charger, so the freezing issue you talk about in previous posts could be power related or it could be related to the usb client port being plugged into a PC?

Also, if you guys are using usb hubs at all then that can cause issues, especially if they're cheap ones, cheap usb cables can also cause issues with voltage drop, which causes problems with power and stability.

[Reggi3]

apparently my endpoint being 81 is fairly irrelevant, I made a mistake changing the 0x80 mask.

It also appears that all midi devices should have an audio interface that shouldn't do anything if it's a simple keyboard/controller. so essentially we should ignore at least the first (0) interface and concentrate on anything after that.

After some great advice I used usbView to check the descriptors of my midi devices, they all have an unused audio interface as the first interface, it's part of the spec I've been told.

[Reggi3]

@tomassch @MrBlueXav I added channel filtering to my fork, it should make it much easier to keep the existing 7bit controls and any refinements we add seperate, that way it will still work as it was originally intended.

[MrBlueXav]

Hello everybody ! Thank you for "Dekrispatoring" ! I've not much time for programming apart from holidays time... However I'm at the moment re-diving in the arcanes of USB MIDI and see if I could rewrite the driver on top of the new Cube HAL library from ST with the new USB Host stack. I'm restarting from the demo project "wave player and recorder" as all the board configuration is done in it. It might be long...

[MrBlueXav]

Well, using Thorsten Klose's MIOS32 driver is too complicated for me I'm afraid... I'm trying now with the existing ST's CDC class driver which seems to be close to the MIDIStreaming class.

[Reggi3]

We have a working usb host implementation that is very stable, I think we might just need to adapt a little bit of the mios32 code for our own use. btw. @MrBlueXav did you look at this? https://github.com/norbim1/preenFM2/blob/master/src/usb/usbd_midi_core.c

It's another stm32f4 synth, it's got usb device support that could be useful.

[MrBlueXav]

It was not that stable for me here at home : my nanoKontrol disconnects episodically ! Work is in progress with my rewriting on HAL Cube new library : midi devices get recognized at connection/disconnection/reconnection and datas are received (and should be sent too). Connection seems very stable. No midi parsing yet, I don't know at the moment what's in the reception buffer...

[Reggi3]

I think the disconnection issue is with the nanokontrol/stm32F4 rather than the software, imho it seems to be a power issue, I have been leaving mine on for days at a time and it's been rock solid.

[MrBlueXav]

Ok ! Thank you for your return. Do you also use nanokontrol v1 ? MIDI receive now works !!! Let's investigate the audio part now...

[Reggi3]

I don't have the nanokontrol but I have 2 different keyboards and other midi controllers that all work fine with dekrispator. they all had issues depending on how the stm32F4 is powered, powered hub had issues, but a usb battery phone charger and an AC usb phone charger ( both 5v with > 500ma output) both worked perfectly, the battery ran for hours and hours before it ran out, and on the AC charger it's been rock solid for days :)

[Reggi3]

We should probably in fact power the boards in a different way, not via usb, I'll look into it and see what I can find out.

[MrBlueXav]

Well I think mission is accomplished ! Rewriting the Dekrispator above the new STM32Cube HAL is done. We have a new USB host MIDI driver with send capabilities (not finalized and I can't test it) that should work with any usb midi compliant controller. Everything is working pretty well here. I've been through several tricky issues :

• increase stack and heap (put now in CCM RAM). Main RAM is not enough on the STM32F407... !
• problem with DMA and USB interrupt priorities, set now equal. That might be also an explanation of my previous instable connection with USB device.

I think the new HAL library is better written, easier to understand and use. It should be also easier to port on another STM µc.

I'll upload Dekrispator_v2 on github soon.

[MrBlueXav]

https://github.com/MrBlueXav/Dekrispator_v2 Merry Christmas !

[Reggi3]

Merci!

[tomassch]

Thanks a lot for porting the project to cube HAL.

I cloned the version 2, changed the paths in the makefile to relative paths, and it was running. Worked with my CME controller first time. If you allow me to push to v2, I can rename my dir to linuxRelease and upload it, so people can build from the command line as well.

One more thing: in MIDI_application.h I had to correct the case of a file in an include:

include "usbh_midi.h" -> "usbh_MIDI.h"

What is using so much RAM? Synth related code?

Happy new year!

[MrBlueXav]

Thank you Tomas ! Happy new year too ! Include case issue now fixed. Good news it works out of the box with your CME controller.

[MrBlueXav]

Let's go now on Dekrispator_v2 repository please ! About RAM usage, I've opened a new issue there...

[MrBlueXav]

@tomassch : OK for your LinuxRelease and thank you ! I've added you as a "collaborator".

[MrBlueXav]

Happy New Year to everybody here ! ;-))

[Reggi3]

Have you guys taken a look at the additions I've made to my fork? I haven't cloned version 2 yet, as I would need to pull my code and re-add it....

[MrBlueXav]

Yes Reggie ! That's a nice work with good doc and many comments in the source files ! I can't test it at the moment however. I don't know much about endless encoders but maybe I could use the ones on my Prophet 08. Keep on the good work on your fork !

Thank you also for talking enthusiastically about Dekrispator on several famous forums !!!

My personal project is more of an autonomous machine making strange and sometimes impredictable sounds that you can tweak in real time....or not...., not really a fully controllable versatile synth. I'd like to explore now polyphony with moving complex chords, evolving between harmonic/non-harmonic ratios. Still a kind of contemporary music box with controls.

[MrBlueXav]

I've also the "Juronstruktor" which is kind of sample player used to produce sequences of mixed up pieces of (french) dirty words... well that's a stupid thing I know but I love it. Should be on github soon.

http://youtu.be/spdb0K8gsQM?list=UUKbBi-lO1MtBKqolWJseSkQ

[Reggi3]

I really like the randomness of dekrispator but I found the randomness to be very extreme, I think I basically put in the ability to tame the randomness if you needed to. I also started to explore the random sequencer, it's just a few functions away from being programmable on the fly.

Something else I was really interested in was making the software customisable, like being able to change the order of the effects units in the signal path, perhaps adding a 3rd oscillator/lfo combo, possibly even extra effects that haven't been done yet?

[MrBlueXav]

Better late than never... I've modified the USB host midi driver so it can automatically detect the midi interface in the connected device. I've used your different proposals, thank you guys ! Concerned files : usbh_midi_core.c/h and usbh_conf.h Could you, in case you have some spare time, test it with your various midi controllers ?

[mravenca]

Hello, does the Dekrispator now support multiple midi devices? I tried to connect synth controller(Akai LPD8) and keyboard(Keystation mini 32) via USB hub and they both do not turn on. When I connect them directly to the USB on discovery board(first synth controller, then keyboard), they work.