Open JORDIFS84 opened 8 years ago
this is probably because the original bambilight does not support windows 10 and it gets no colors. I forked the complete project and replaced the screencapture method with the windows desktop duplication api. works on windows 10, if you like, give it a shot and try out, if you have some color output there. https://github.com/fabsenet/adrilight/releases
I have a similar issue - WS2812 leds, glowing nice rainbow until bambilight ket-out is enabled - then they go mainly-white. There is a slight variation in colour, but overall all glow white, when they should be for example green.
EDIT: Looks like red is all right, black is black, white is ok too. Green i s Blue and blue is greenish .)
At the end I am using ambibox software and it works perfect http://www.ambibox.ru/en/index.php/Main_Page Good luck!
El 18 sept 2017, a las 22:09, darmach notifications@github.com<mailto:notifications@github.com> escribió:
I have a similar issue - WS2812 leds, glowing nice rainbow until bambilight ket-out is enabled - then they go mainly-white. There is a slight variation in colour, but overall all glow white, when they should be for example green.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/MrBoe/Bambilight/issues/6#issuecomment-330341407, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AVlrFPb3jrjHPy5xZ6HABsbFIzG6mHmOks5sjs4DgaJpZM4KOukI.
Hello, First thank you very much for the support and all development that you did :)
I have an issue, is when a switch on the LED-OUT , the led strip get OFF , do you know why ? before that all LEDs are playing a nice rainbow colour, so its means at least the arduino is going well.