search

MrElectricCat / minimosd-extra

Automatically exported from code.google.com/p/minimosd-extra
0 stars 0 forks source link

OSD 2.4.0.0 R727 - Does not work with Pixhawk - #61

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
Loading 2.4 hex on to the OSD and connecting to the Pixhawk

Hopes it would work well but no telemetry except for flight mode

What version of the product are you using? 2.4.0.0 r727 running on windows 7.

Original issue reported on code.google.com by AdamC.Or...@gmail.com on 20 Feb 2014 at 10:30

GoogleCodeExporter commented 9 years ago 
having the same issue, using 2.4.0.0 r727 running on windows 7, 
MinimOSD-Extra_Copter_Pre-release_2.4_r726.hex

all was working with pixhawk before update

Original comment by iamricha...@gmail.com on 24 Feb 2014 at 1:37

GoogleCodeExporter commented 9 years ago 
i have re-flashed the non extra stock hex file then back to 2.4 extra and all 
is now working.

Original comment by iamricha...@gmail.com on 25 Feb 2014 at 11:33

GoogleCodeExporter commented 9 years ago 
until i cycle the power and then back to square one....

Original comment by iamricha...@gmail.com on 25 Feb 2014 at 11:49

GoogleCodeExporter commented 9 years ago 
Same issue here. Pixhawk working only with 
https://code.google.com/p/arducam-osd/downloads/list

Original comment by pankrys...@gmail.com on 4 Mar 2014 at 5:51

GoogleCodeExporter commented 9 years ago 
Problem solved. You have to connect OSD to Telemetry 1 port (not Telemetry 2). 
Everything works!

Original comment by pankrys...@gmail.com on 4 Mar 2014 at 7:33

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Use the port2 isnt a good idea if you also use a 3dr transmitter because port 2 
is a low amp port. If you want to enable telemetry for osd on port2 you need to 
change the sr2 parameters on mission planner full parameters list. Copy the 
values from sr1 (all the values). For me is working well with this firmware 
MinimOSD-Extra_Copter_Pre-release_2.4_r726

Original comment by umberto....@gmail.com on 19 May 2014 at 4:15

GoogleCodeExporter commented 9 years ago 
Closed as we have a new version.

Ifthe problem is still present please reopen it.

Original comment by gabek...@gmail.com on 28 Nov 2014 at 11:44

GoogleCodeExporter commented 9 years ago 
What is this new version?

Original comment by twstee...@gmail.com on 4 Dec 2014 at 2:41

GoogleCodeExporter commented 9 years ago 
I connected OSD to Pixhawk telemetry port 1, still did not work. Then tried to 
copy all SR1 parameters to SR2, did not help either.
Pls note that it worked before when I connected the OSD to Telemetry Port 2. 
Without touching anything, it suddenly stopped working. 

Can anybody help ?

Original comment by frankie....@gmail.com on 8 May 2015 at 2:35

GoogleCodeExporter commented 9 years ago 
I have the same issue: OSD shows only flight mode, no other data. 
Also, tried Mavlink to S-Port converter on Telemetry 2 port, no success.

Any idea, what is the cause?

Original comment by michael....@googlemail.com on 8 May 2015 at 12:22