search

MrMEEE / bumblebee-Old-and-abbandoned

OUTDATED!!!!! - Replaced by "The Bumblebee Project" and "Ironhide"
http://www.martin-juhl.dk/2011/08/ironhide-reporting-for-duty/
469 stars 50 forks source link

error '[VGL] ERROR: Could not open display :1.' #3

Closed ChasingPi closed 13 years ago

ChasingPi commented 13 years ago

Sounds like a great idea you have, but I can't get it to work. I am running a lenovo b560. If I type:

gary@gary-Lenovo-B560:~$ optirun64 firefox [VGL] ERROR: Could not open display :1.

install shell looks like:

gary@gary-Lenovo-B560:~$ sudo '/home/gary/Downloads/MrMEEE-bumblebee-fea15c6/install.sh' [sudo] password for gary: Welcome to the bumblebee installation v.1.1.2 Licensed under BEER-WARE License and GPL

This will enable you to utilize both your Intel and nVidia card

Please note that this script will only work with 64-bit Debian Based machines and has only been tested on Ubuntu Natty 11.04 but should work on others as well from version v1.1 support for 32-bit Ubuntu has been added I will add support for RPM-based distributions later.. or somebody else might... Remember... This is OpenSource :D

THIS SCRIPT MUST BE RUN WITH SUDO

Are you sure you want to proceed?? (Y/N)

y

Installing needed packages Reading package lists... Done Building dependency tree
Reading state information... Done nvidia-current is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.

Backing up Configuration

Installing Optimus Configuration and files cp: cannot stat install-files/xorg.conf.intel': No such file or directory cp: cannot statinstall-files/xorg.conf.nvidia': No such file or directory cp: cannot stat install-files/xdm-optimus': No such file or directory cp: cannot statinstall-files/xdm-optimus.script': No such file or directory cp: cannot stat install-files/virtualgl.conf': No such file or directory cp: cannot statinstall-files/optimusXserver': No such file or directory

64-bit system detected

cp: cannot stat install-files/xdm-optimus-64.bin': No such file or directory dpkg: error processing install-files/VirtualGL_amd64.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: install-files/VirtualGL_amd64.deb chmod: cannot access/etc/init.d/xdm-optimus': No such file or directory chmod: cannot access /usr/bin/xdm-optimus': No such file or directory update-alternatives: warning: forcing reinstallation of alternative /usr/lib/mesa/ld.so.conf because link group gl_conf is broken. ln: creating symbolic link/etc/alternatives/xorg_extra_modules-bumblebee/xorg': File exists WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf.optiorig, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf.optiorig, it will be ignored in a future release. FATAL: Error inserting nvidia_current (/lib/modules/2.6.38-8-generic/updates/dkms/nvidia-current.ko): No such device

Changing Configuration to match your Machine

sed: can't read /etc/X11/xorg.conf.nvidia: No such file or directory

Select your Laptop: 1) Alienware M11X 2) Dell XPS 15 3) Asus N61Jv (X64Jv) 4) Asus EeePC 1215N 5) Acer Aspire 5745PG 6) Dell Vostro 3300 7) Dell XPS 15 (L502x) 8) Dell Vostro 3400 9) Toshiba Satellite M645-SP4132L 10) Asus U43JC

97) Manually Set Output to CRT-0 98) Manually Set Output to DFP-0 99) Manually Enter Output

98

Setting output device to: DFP-0

sed: can't read /etc/X11/xorg.conf.nvidia: No such file or directory

Enabling Optimus Service update-rc.d: /etc/init.d/xdm-optimus: file does not exist

Setting up Enviroment variables

The Image Transport is how the images are transferred from the nVidia card to the Intel card, people has different experiences of performance, but just select the default if you are in doubt.

I recently found out that yuv and jpeg both has some lagging this is only noticable in fast moving games, such as 1st person shooters and for me, its only good enough with xv, even though xv sets down performance a little bit.

1) YUV 2) JPEG 3) PROXY 4) XV (default) 5) RGB

4

64-bit system detected - Configuring

Ok... Installation complete...

Now you need to make sure that the command "vglclient -gl" is run after your Desktop Enviroment is started

In KDE this is done by this script.. Thanks to Peter Liedler..

In GNOME this is done by placing a shortcut in ~/.config/autostart/ or using the Adminstration->Sessions GUI

After that you should be able to start applications with "optirun32 " or "optirun64 " optirun32 can be used for legacy 32-bit applications and Wine Games.. Everything else should work on optirun64 But... if one doesn't work... try the other

Good luck... MrMEEE / Martin Juhl

http://www.martin-juhl.dk, http://twitter.com/martinjuhl, https://github.com/MrMEEE/bumblebee

/var/log/Xorg.0.log displays the following:

[ 19.671] X.Org X Server 1.10.1 Release Date: 2011-04-15 [ 19.671] X Protocol Version 11, Revision 0 [ 19.671] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu [ 19.671] Current Operating System: Linux gary-Lenovo-B560 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 [ 19.671] Kernel command line: BOOTIMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=13420908-1bfe-46fb-a193-af9d8b457f2b ro quiet splash vt.handoff=7 [ 19.671] Build Date: 19 April 2011 03:40:45PM [ 19.671] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) [ 19.671] Current version of pixman: 0.20.2 [ 19.671] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.671] Markers: (--) probed, (*) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 19.671 Log file: "/var/log/Xorg.0.log", Time: Tue May 10 15:16:00 2011 19.671 Using config file: "/etc/X11/xorg.conf" 19.671 Using system config directory "/usr/share/X11/xorg.conf.d" 19.682 ServerLayout "Layout0" 19.682 |-->Screen "Screen0" (0) 19.682 | |-->Monitor "Monitor0" 19.682 | |-->Device "Device0" 19.682 |-->Screen "Screen1" (1) 19.682 | |-->Monitor "Monitor0" 19.682 | |-->Device "Device1" 19.682 |-->Input Device "Keyboard0" 19.682 |-->Input Device "Mouse0" 19.682 Automatically adding devices 19.682 Automatically enabling devices 19.683 The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 19.683] Entry deleted from font path. 19.683 The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 19.683] Entry deleted from font path. 19.683 The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 19.683] Entry deleted from font path. 19.683 The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 19.683] Entry deleted from font path. 19.683 The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 19.683] Entry deleted from font path. 19.683 FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins 19.683 ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" 19.683 The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. 19.683 Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. 19.683 Disabling Keyboard0 19.683 Disabling Mouse0 19.683 Loader magic: 0x7e0280 19.683 Module ABI versions: [ 19.683] X.Org ANSI C Emulation: 0.4 [ 19.683] X.Org Video Driver: 10.0 [ 19.683] X.Org XInput driver : 12.3 [ 19.683] X.Org Server Extension : 5.0 19.684 PCI:_(0:0:2:0) 8086:0046:17aa:3920 rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 19.684 Open ACPI successful (/var/run/acpid.socket) 19.684 LoadModule: "extmod" 19.699 Loading /usr/lib/xorg/modules/extensions/libextmod.so 19.699 Module extmod: vendor="X.Org Foundation" [ 19.699] compiled for 1.10.1, module version = 1.0.0 [ 19.699] Module class: X.Org Server Extension [ 19.699] ABI class: X.Org Server Extension, version 5.0 19.699 Loading extension MIT-SCREEN-SAVER 19.699 Loading extension XFree86-VidModeExtension 19.699 Loading extension XFree86-DGA 19.699 Loading extension DPMS 19.699 Loading extension XVideo 19.699 Loading extension XVideo-MotionCompensation 19.699 Loading extension X-Resource 19.699 LoadModule: "dbe" 19.699 Loading /usr/lib/xorg/modules/extensions/libdbe.so 19.699 Module dbe: vendor="X.Org Foundation" [ 19.699] compiled for 1.10.1, module version = 1.0.0 [ 19.699] Module class: X.Org Server Extension [ 19.699] ABI class: X.Org Server Extension, version 5.0 19.699 Loading extension DOUBLE-BUFFER 19.699 LoadModule: "glx" 19.700 Loading /usr/lib/xorg/modules/extensions/libglx.so 19.700 Module glx: vendor="X.Org Foundation" [ 19.700] compiled for 1.10.1, module version = 1.0.0 [ 19.700] ABI class: X.Org Server Extension, version 5.0 19.700 AIGLX enabled 19.700 Loading extension GLX 19.700 LoadModule: "record" 19.700 Loading /usr/lib/xorg/modules/extensions/librecord.so 19.700 Module record: vendor="X.Org Foundation" [ 19.700] compiled for 1.10.1, module version = 1.13.0 [ 19.700] Module class: X.Org Server Extension [ 19.700] ABI class: X.Org Server Extension, version 5.0 19.700 Loading extension RECORD 19.700 LoadModule: "dri" 19.701 Loading /usr/lib/xorg/modules/extensions/libdri.so 19.701 Module dri: vendor="X.Org Foundation" [ 19.701] compiled for 1.10.1, module version = 1.0.0 [ 19.701] ABI class: X.Org Server Extension, version 5.0 19.701 Loading extension XFree86-DRI 19.701 LoadModule: "dri2" 19.701 Loading /usr/lib/xorg/modules/extensions/libdri2.so 19.701 Module dri2: vendor="X.Org Foundation" [ 19.701] compiled for 1.10.1, module version = 1.2.0 [ 19.701] ABI class: X.Org Server Extension, version 5.0 19.701 Loading extension DRI2 19.701 LoadModule: "intel" 19.701 Loading /usr/lib/xorg/modules/drivers/intel_drv.so 19.701 Module intel: vendor="X.Org Foundation" [ 19.702] compiled for 1.10.1, module version = 2.14.0 [ 19.702] Module class: X.Org Video Driver [ 19.702] ABI class: X.Org Video Driver, version 10.0 19.702 LoadModule: "nvidia" 19.702 Warning, couldn't open module nvidia 19.702 UnloadModule: "nvidia" 19.702 Unloading nvidia 19.702 Failed to load module "nvidia" (module does not exist, 0) 19.702 intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge 19.702 using VT number 7

19.704 Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.705] drmOpenDevice: node name is /dev/dri/card0 [ 19.705] drmOpenDevice: open result is 9, (OK) [ 19.705] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 19.705] drmOpenDevice: node name is /dev/dri/card0 [ 19.705] drmOpenDevice: open result is 9, (OK) [ 19.705] drmOpenByBusid: drmOpenMinor returns 9 [ 19.705] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 19.705 intel(0): Depth 24, (--) framebuffer bpp 32 19.705 intel(0): RGB weight 888 19.705 intel(0): Default visual is TrueColor 19.705 intel(0): Integrated Graphics Chipset: Intel(R) Arrandale 19.705 intel(0): Chipset: "Arrandale" 19.705 intel(0): Relaxed fencing enabled 19.705 intel(0): Tiling enabled 19.705 intel(0): SwapBuffers wait enabled 19.705 intel(0): video overlay key set to 0x101fe 19.705 intel(0): Output LVDS1 using monitor section Monitor0 19.709 intel(0): found backlight control interface /sys/class/backlight/acpi_video0 19.709 intel(0): Output VGA1 has no monitor section 19.713 intel(0): Output HDMI1 has no monitor section 19.714 intel(0): Output DP1 has no monitor section 19.715 intel(0): EDID for output LVDS1 19.715 intel(0): Manufacturer: AUO Model: 22ec Serial#: 0 19.715 intel(0): Year: 2009 Week: 1 19.715 intel(0): EDID Version: 1.3 19.715 intel(0): Digital Display Input 19.715 intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 19.715 intel(0): Gamma: 2.20 19.715 intel(0): No DPMS capabilities specified 19.715 intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 19.715 intel(0): First detailed timing is preferred mode 19.715 intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570 19.715 intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 19.715 intel(0): Manufacturer's mask: 0 19.715 intel(0): Supported detailed timing: 19.715 intel(0): clock: 69.3 MHz Image Size: 344 x 193 mm 19.715 intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0 19.715 intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0 19.715 intel(0): Unknown vendor-specific block f 19.715 intel(0): AUO 19.715 intel(0): B156XW02 V2 19.715 intel(0): EDID (in hex): 19.715 intel(0): 00ffffffffffff0006afec2200000000 19.715 intel(0): 01130103802213780ac8959e57549226 19.715 intel(0): 0f505400000001010101010101010101 19.715 intel(0): 010101010101121b5642500026302018 19.715 intel(0): 340058c1100000180000000f00000000 19.715 intel(0): 00000000000000000020000000fe0041 19.715 intel(0): 554f0a202020202020202020000000fe 19.715 intel(0): 004231353658573032205632200a00c0 19.715 intel(0): EDID vendor "AUO", prod id 8940 19.715 intel(0): Printing DDC gathered Modelines: 19.715 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 19.715 intel(0): Not using default mode "320x240" (doublescan mode not supported) 19.715 intel(0): Not using default mode "400x300" (doublescan mode not supported) 19.715 intel(0): Not using default mode "400x300" (doublescan mode not supported) 19.715 intel(0): Not using default mode "512x384" (doublescan mode not supported) 19.715 intel(0): Not using default mode "640x480" (doublescan mode not supported) 19.715 intel(0): Not using default mode "640x512" (doublescan mode not supported) 19.715 intel(0): Not using default mode "800x600" (doublescan mode not supported) 19.715 intel(0): Not using default mode "896x672" (doublescan mode not supported) 19.715 intel(0): Not using default mode "928x696" (doublescan mode not supported) 19.715 intel(0): Not using default mode "960x720" (doublescan mode not supported) 19.715 intel(0): Not using default mode "576x432" (doublescan mode not supported) 19.715 intel(0): Not using default mode "680x384" (doublescan mode not supported) 19.715 intel(0): Not using default mode "680x384" (doublescan mode not supported) 19.715 intel(0): Not using default mode "700x525" (doublescan mode not supported) 19.715 intel(0): Not using default mode "720x450" (doublescan mode not supported) 19.715 intel(0): Not using default mode "800x512" (doublescan mode not supported) 19.715 intel(0): Not using default mode "840x525" (doublescan mode not supported) 19.715 intel(0): Not using default mode "840x525" (doublescan mode not supported) 19.715 intel(0): Not using default mode "960x540" (doublescan mode not supported) 19.715 intel(0): Not using default mode "960x600" (doublescan mode not supported) 19.715 intel(0): Not using default mode "1024x768" (doublescan mode not supported) 19.715 intel(0): Printing probed modes for output LVDS1 19.715 intel(0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 19.715 intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) 19.715 intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz) 19.715 intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) 19.715 intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) 19.715 intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) 19.715 intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) 19.715 intel(0): EDID for output VGA1 19.720 intel(0): EDID for output HDMI1 19.721 intel(0): EDID for output DP1 19.721 intel(0): Output LVDS1 connected 19.721 intel(0): Output VGA1 disconnected 19.721 intel(0): Output HDMI1 disconnected 19.721 intel(0): Output DP1 disconnected 19.721 intel(0): Using exact sizes for initial modes 19.721 intel(0): Output LVDS1 using initial mode 1366x768 19.721 intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. 19.721 intel(0): Kernel page flipping support detected, enabling 19.721 intel(0): Display dimensions: (340, 190) mm 19.721 intel(0): DPI set to (102, 102) 19.721 Loading sub module "fb" 19.721 LoadModule: "fb" 19.721 Loading /usr/lib/xorg/modules/libfb.so 19.722 Module fb: vendor="X.Org Foundation" [ 19.722] compiled for 1.10.1, module version = 1.0.0 [ 19.722] ABI class: X.Org ANSI C Emulation, version 0.4 19.722 Depth 24 pixmap format is 32 bpp 19.722 intel(0): VideoRam: 262144 KB 19.722 intel(0): [DRI2] Setup complete 19.722 intel(0): [DRI2] DRI driver: i965 19.722 intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled 19.730 UXA(0): Driver registered support for the following operations: 19.730 solid 19.730 copy 19.730 composite (RENDER acceleration) 19.730 put_image 19.730 get_image 19.730 intel(0): Backing store disabled 19.730 intel(0): Silken mouse enabled 19.730 intel(0): Initializing HW Cursor 19.800 intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. 19.819 intel(0): DPMS enabled 19.819 intel(0): Intel XvMC decoder enabled 19.819 intel(0): Set up textured video 19.819 intel(0): [XvMC] xvmc_vld driver initialized. 19.819 intel(0): direct rendering: DRI2 Enabled 19.819 intel(0): hotplug detection: "enabled" 19.819 RandR disabled 19.819 Initializing built-in extension Generic Event Extension 19.819 Initializing built-in extension SHAPE 19.819 Initializing built-in extension MIT-SHM 19.819 Initializing built-in extension XInputExtension 19.819 Initializing built-in extension XTEST 19.819 Initializing built-in extension BIG-REQUESTS 19.819 Initializing built-in extension SYNC 19.819 Initializing built-in extension XKEYBOARD 19.819 Initializing built-in extension XC-MISC 19.819 Initializing built-in extension SECURITY 19.819 Initializing built-in extension XINERAMA 19.819 Initializing built-in extension XFIXES 19.819 Initializing built-in extension RENDER 19.819 Initializing built-in extension RANDR 19.819 Initializing built-in extension COMPOSITE 19.819 Initializing built-in extension DAMAGE 19.819 Initializing built-in extension GESTURE 19.825 AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so 19.844 AIGLX: enabled GLX_MESA_copy_sub_buffer 19.844 AIGLX: enabled GLX_INTEL_swap_event 19.844 AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control 19.844 AIGLX: enabled GLX_SGI_make_current_read 19.844 AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects 19.845 AIGLX: Loaded and initialized i965 19.845 GLX: Initialized DRI2 GL provider for screen 0 19.845 intel(0): Setting screen physical size to 361 x 203 19.853 XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm 19.864 config/udev: Adding input device Power Button (/dev/input/event2) 19.864 Power Button: Applying InputClass "evdev keyboard catchall" 19.864 LoadModule: "evdev" 19.864 Loading /usr/lib/xorg/modules/input/evdev_drv.so 19.865 Module evdev: vendor="X.Org Foundation" [ 19.865] compiled for 1.10.0.902, module version = 2.6.0 [ 19.865] Module class: X.Org XInput Driver [ 19.865] ABI class: X.Org XInput driver, version 12.3 19.865 Using input driver 'evdev' for 'Power Button' 19.865 Loading /usr/lib/xorg/modules/input/evdev_drv.so 19.865 Power Button: always reports core events 19.865 Power Button: Device: "/dev/input/event2" 19.910 Power Button: Found keys 19.910 Power Button: Configuring as keyboard 19.910 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" 19.910 XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) 19.910 Option "xkb_rules" "evdev" 19.910 Option "xkb_model" "pc105" 19.910 Option "xkb_layout" "us" 19.911 config/udev: Adding input device Video Bus (/dev/input/event6) 19.911 Video Bus: Applying InputClass "evdev keyboard catchall" 19.911 Using input driver 'evdev' for 'Video Bus' 19.911 Loading /usr/lib/xorg/modules/input/evdev_drv.so 19.911 Video Bus: always reports core events 19.911 Video Bus: Device: "/dev/input/event6" 19.950 Video Bus: Found keys 19.950 Video Bus: Configuring as keyboard 19.950 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6" 19.950 XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) 19.950 Option "xkb_rules" "evdev" 19.950 Option "xkb_model" "pc105" 19.950 Option "xkb_layout" "us" 20.003 config/udev: Adding input device Lid Switch (/dev/input/event0) 20.003 No input driver/identifier specified (ignoring) 20.003 config/udev: Adding input device Sleep Button (/dev/input/event1) 20.003 Sleep Button: Applying InputClass "evdev keyboard catchall" 20.003 Using input driver 'evdev' for 'Sleep Button' 20.003 Loading /usr/lib/xorg/modules/input/evdev_drv.so 20.003 Sleep Button: always reports core events 20.004 Sleep Button: Device: "/dev/input/event1" 20.046 Sleep Button: Found keys 20.046 Sleep Button: Configuring as keyboard 20.046 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1" 20.046 XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) 20.046 Option "xkb_rules" "evdev" 20.046 Option "xkb_model" "pc105" 20.046 Option "xkb_layout" "us" 20.048 config/udev: Adding input device Lenovo EasyCamera (/dev/input/event5) 20.048 Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall" 20.049 Using input driver 'evdev' for 'Lenovo EasyCamera' 20.049 Loading /usr/lib/xorg/modules/input/evdev_drv.so 20.049 Lenovo EasyCamera: always reports core events 20.049 Lenovo EasyCamera: Device: "/dev/input/event5" 20.049 Lenovo EasyCamera: Found keys 20.049 Lenovo EasyCamera: Configuring as keyboard 20.049 Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5/event5" 20.049 XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD) 20.049 Option "xkb_rules" "evdev" 20.049 Option "xkb_model" "pc105" 20.049 Option "xkb_layout" "us" 20.050 config/udev: Adding input device HDA Intel Mic (/dev/input/event7) 20.050 No input driver/identifier specified (ignoring) 20.050 config/udev: Adding input device HDA Intel Headphone (/dev/input/event8) 20.050 No input driver/identifier specified (ignoring) 20.054 config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) 20.054 AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" 20.054 Using input driver 'evdev' for 'AT Translated Set 2 keyboard' 20.054 Loading /usr/lib/xorg/modules/input/evdev_drv.so 20.054 AT Translated Set 2 keyboard: always reports core events 20.054 AT Translated Set 2 keyboard: Device: "/dev/input/event3" 20.055 AT Translated Set 2 keyboard: Found keys 20.055 AT Translated Set 2 keyboard: Configuring as keyboard 20.055 Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" 20.055 XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) 20.055 Option "xkb_rules" "evdev" 20.055 Option "xkb_model" "pc105" 20.055 Option "xkb_layout" "us" 20.055 config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9) 20.055 ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" 20.055 ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" 20.055 LoadModule: "synaptics" 20.055 Loading /usr/lib/xorg/modules/input/synaptics_drv.so 20.055 Module synaptics: vendor="X.Org Foundation" [ 20.056] compiled for 1.10.0.902, module version = 1.3.99 [ 20.056] Module class: X.Org XInput Driver [ 20.056] ABI class: X.Org XInput driver, version 12.3 20.056 Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' 20.056 Loading /usr/lib/xorg/modules/input/synaptics_drv.so 20.056 ETPS/2 Elantech Touchpad: always reports core events 20.056 Option "Device" "/dev/input/event9" 20.130 ETPS/2 Elantech Touchpad: x-axis range 8 - 1144 20.130 ETPS/2 Elantech Touchpad: y-axis range 8 - 760 20.130 ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data. 20.130 ETPS/2 Elantech Touchpad: buttons: left right double triple 20.130 ETPS/2 Elantech Touchpad: invalid pressure range. defaulting to 0 - 256 20.130 ETPS/2 Elantech Touchpad: invalid finger width range. defaulting to 0 - 16 20.190 ETPS/2 Elantech Touchpad: touchpad found 20.190 ETPS/2 Elantech Touchpad: always reports core events 20.190 Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9" 20.190 XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD) 20.190 ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 20.190 ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 20.190 ETPS/2 Elantech Touchpad: AccelFactor is now 0.147 20.190 ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 20.190 ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 20.190 ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 20.190 ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 20.200 ETPS/2 Elantech Touchpad: failed to open grail, no gesture support 20.200 ETPS/2 Elantech Touchpad: touchpad found 20.200 config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) 20.200 No input driver/identifier specified (ignoring) 20.200 config/udev: Adding input device Ideapad extra buttons (/dev/input/event4) 20.200 Ideapad extra buttons: Applying InputClass "evdev keyboard catchall" 20.200 Using input driver 'evdev' for 'Ideapad extra buttons' 20.200 Loading /usr/lib/xorg/modules/input/evdev_drv.so 20.201 Ideapad extra buttons: always reports core events 20.201 Ideapad extra buttons: Device: "/dev/input/event4" 20.210 Ideapad extra buttons: Found keys 20.210 Ideapad extra buttons: Configuring as keyboard 20.210 Option "config_info" "udev:/sys/devices/platform/ideapad/input/input4/event4" 20.210 XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD) 20.210 Option "xkb_rules" "evdev" 20.210 Option "xkb_model" "pc105" 20.210 Option "xkb_layout" "us" 20.858 intel(0): EDID vendor "AUO", prod id 8940 20.858 intel(0): Printing DDC gathered Modelines: 20.858 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 20.866 intel(0): EDID vendor "AUO", prod id 8940 20.866 intel(0): Printing DDC gathered Modelines: 20.866 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 20.904 intel(0): EDID vendor "AUO", prod id 8940 20.905 intel(0): Printing DDC gathered Modelines: 20.905 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 20.913 intel(0): EDID vendor "AUO", prod id 8940 20.913 intel(0): Printing DDC gathered Modelines: 20.913 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 37.731 intel(0): EDID vendor "AUO", prod id 8940 37.731 intel(0): Printing DDC gathered Modelines: 37.731 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 37.738 intel(0): EDID vendor "AUO", prod id 8940 37.738 intel(0): Printing DDC gathered Modelines: 37.738 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 37.746 intel(0): EDID vendor "AUO", prod id 8940 37.746 intel(0): Printing DDC gathered Modelines: 37.746 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 37.752 intel(0): EDID vendor "AUO", prod id 8940 37.752 intel(0): Printing DDC gathered Modelines: 37.752 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 37.872 intel(0): EDID vendor "AUO", prod id 8940 37.872 intel(0): Printing DDC gathered Modelines: 37.872 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 43.371 intel(0): EDID vendor "AUO", prod id 8940 43.371 intel(0): Printing DDC gathered Modelines: 43.371 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 1839.710 AIGLX: Suspending AIGLX clients for VT switch 1849.376 Open ACPI successful (/var/run/acpid.socket) 1849.376 AIGLX: Resuming AIGLX clients after VT switch 1849.440 intel(0): EDID vendor "AUO", prod id 8940 1849.440 intel(0): Printing DDC gathered Modelines: 1849.440 intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz) 1849.740 ETPS/2 Elantech Touchpad: failed to open grail, no gesture support 1849.740 ETPS/2 Elantech Touchpad: touchpad found

I would love to get this up and any help would be appreciated!

MrMEEE commented 13 years ago

Hi..

It seems like you haven't fetched the entire project, but just the script.. try doing:

git clone git@github.com:MrMEEE/bumblebee.git

cd bumblebee

sudo ./install.sh

chuong commented 13 years ago

Hi Martin,

I got an error message when trying to run the above git command:

Initialized empty Git repository in /home/chuong/projects/bumblebee/.git/ The authenticity of host 'github.com (207.97.227.239)' can't be established. RSA key fingerprint is 16:27:ac:a5:76:28:2d:36:63:1b:56:4d:eb:df:a6:48. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'github.com,207.97.227.239' (RSA) to the list of known hosts. Permission denied (publickey). fatal: The remote end hung up unexpectedly

Chuong

MrMEEE commented 13 years ago

Sorry.. wrong link...

It should be:

git clone https://github.com/MrMEEE/bumblebee.git

chuong commented 13 years ago

Thanks.

LadyChloe commented 13 years ago

I have this problem, I have sent the bugreport via e-mail. bumblebee-bugreport-11.5.2011.tar.gz

MrMEEE commented 13 years ago

LadyChloe: this isn't the same problem..

closing this and cloning into:

https://github.com/MrMEEE/bumblebee/issues/9

I have already written an update to this issue..