Asus 1215N - "extension GLX missing" error

[konradk]

I've installed bumblebee-36c195f I've tried launch 'optirun /usr/bin/glxgears':

Xlib: extension "GLX" missing on display ":1". [VGL] WARNING: VirtualGL attempted and failed to obtain a Pbuffer-enabled [VGL] 24-bit visual on the 3D X server :1. If the application [VGL] subsequently fails, then make sure that the 3D X server is configured [VGL] for 24-bit color and has accelerated 3D drivers installed. Error: couldn't get an RGB, Double-buffered visual

Bugreport sent.

[ghost]

I have the same exact Issue dardan@ubuntu:~/Bureau/MrMEEE-bumblebee-1fe71b9$ optirun glxgears [VGL] WARNING: VirtualGL attempted and failed to obtain a Pbuffer-enabled [VGL] 24-bit visual on the 3D X server :1. If the application [VGL] subsequently fails, then make sure that the 3D X server is configured [VGL] for 24-bit color and has accelerated 3D drivers installed. Error: couldn't get an RGB, Double-buffered visual

[emjotec]

exactly the same one :/

$ optirun glxgears [VGL] WARNING: VirtualGL attempted and failed to obtain a Pbuffer-enabled [VGL] 24-bit visual on the 3D X server :1. If the application [VGL] subsequently fails, then make sure that the 3D X server is configured [VGL] for 24-bit color and has accelerated 3D drivers installed. Error: couldn't get an RGB, Double-buffered visual

[ghost]

Whats ur pc and ur nvidia card

[emjotec]

Asus 1215N nvidia geforce gt218 hmm... that's asus1215n issue thread ;)

[ghost]

yes but even i havent asus i think its optimus my pc its an acer 5742g nvidia geforce ggt 420m

[MrMEEE]

I think this is fixed in newest version.. please try and report back

[konradk]

Unfortunately - the same error :(

[konradk]

Not the same. Now it is: [VGL] ERROR: Could not open display :1.

I'll send bugreport in minute.

[konradk]

ok, I am KDE user, i typed in konsole "optirun /usr/bin/glxgears" and I had error as above. Now I used alt+f2, and in this launcher i typed "optirun /usr/bin/glxgears". Now it works, but resolution is broken, display is multipled few times, and after exiting there is black screen - I had to restart Xserver. The same problem in other applications. I sent you bugreport.

[MrMEEE]

Ok... can I get you to try with newest version 1.3.14...

[konradk]

Unfortunately :( When I run glxgears, I have this: http://wstaw.org/w/uTb/ (my screen's photo, bad quality). This is the same situation as above...

[MrMEEE]

Just to get it right: Your screen is multiplied from login, or first when you run the optirun command???

[konradk]

From first when I run the optirun command. After launching "optirun glxgears" or any other app by optirun Xorg is unusable - black screen with some "artifacts"/noise.

[komarEX]

same for me (as konradk)

[matthew85]

sounds like the wrong screen is addressed. For me i could reproduce this only when I started with: optirun -d :0 glxgears instead of -d :1 which is the default.

[konradk]

Ok, I typed "optirun -d :0 glxgears" and now I am able to launch glxgears also from console. But it still looks like this: http://wstaw.org/w/uTb/ and forces me to kill Xorg.

[MrMEEE]

Which version of ubuntu are you running??+

[MrMEEE]

have you tried v. 1.3.14...

If you have, please resend a bugreport...

[ghost]

Mrmee same here i sended u a bug report exept my pc its an acer as while as i can see we have the exact same problems

[MrMEEE]

please try newest...

or just run

rm /usr/lib/nvidia-current/xorg/xorg

and

/etc/init.d/bumblebee stop /etc/init.d/bumblebee start

[ghost]

dardan@ubuntu:~/Bureau/MrMEEE-bumblebee-c06ef41/install-files$ rm /usr/lib/nvidia-current/xorg/xorg rm: cannot remove `/usr/lib/nvidia-current/xorg/xorg': No such file or directory tryed the new one the same as before should i make another bug report

[MrMEEE]

yes.. but can you please try to reboot before you do it...

[konradk]

Still the same problem. Bugreport sent. My OS: Kubuntu 11.04.

[ghost]

i did the reboot same thing after rebooting

[MrMEEE]

Could you guys please try to run:

DISPLAY=:1 glxgears

and send me the output...

[MrMEEE]

please also do a cat /usr/local/optimusXserver

[ghost]

DISPLAY=:1 glxgears Error: couldn't get an RGB, Double-buffered visual and dardan@ubuntu:/usr/local$ cat /usr/local/optimusXserve cat: /usr/local/optimusXserve: No such file or directory

[MrMEEE]

you are missing a "r" try "cat /usr/local/optimusXserver"..

[ghost]

DISPLAY=:0 glxgears that prints me like i did glxgears alone

[ghost]

dardan@ubuntu:/usr/local$ ls bin etc games include lib man sbin share src but no optimusXserver it doesent exists

[MrMEEE]

you are missing a "r" try "cat /usr/local/optimusXserver"..

[konradk]

Did you mean /usr/local/bin/optimusXserver ?

konradk@konradk-eeepc:~$ cat /usr/local/bin/optimusXserver

!/bin/bash

LD_LIBRARY_PATH=/usr/lib/nvidia-current /usr/bin/X $@konradk@konradk-eeepc:~$

konradk@konradk-eeepc:~$ DISPLAY=:1 glxgears Error: couldn't open display :1

but I tried also konradk@konradk-eeepc:~$ DISPLAY=:0 glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 284 frames in 5.0 seconds = 56.641 FPS XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0" after 918 requests (918 known processed) with 0 events remaining.

[MrMEEE]

sry guys... meant /usr/local/bin/optimusXserver...

konraddk: please run /etc/init.d/bumblebee start

and send me /var/log/Xorg.1.log

[konradk]

konradk@konradk-eeepc:~$ /etc/init.d/bumblebee start Bumblebee X Server is already running.

My log: http://wklej.org/id/530227/

Please note lines 156-166 :)

[MrMEEE]

try to replace

Options IgnoreEDID

to

Options IgnoreEDID "true"

in /etc/X11/xorg.conf.nvidia

then try to run /etc/init.d/bumblebee stop /etc/init.d/bumblebee start

and post /var/log/Xorg.1.log

[konradk]

I changed Option "IgnoreEDID" to Option "IgnoreEDID" "true"

konradk@konradk-eeepc:~$ /etc/init.d/bumblebee stop Stopping bumblebee X server: kill: 52: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or kill -l [exitstatus] konradk@konradk-eeepc:~$ /etc/init.d/bumblebee start Bumblebee X Server is already running.

I don't think that this restart was correct, so I did reboot.

My log: http://wklej.org/id/530246/

[MrMEEE]

ok..

please try:

ps axu |grep X

and

DISPLAY=:1 glxgears

[konradk]

konradk@konradk-eeepc:~$ ps axu |grep X root 776 4.8 0.9 31476 19824 tty7 Ss+ 12:27 2:11 /usr/bin/X :0 vt7 -nr -nolisten tcp -auth /var/run/xauth/A:0-hSfjcb root 806 0.0 0.0 3016 1288 ? S 12:27 0:00 /bin/bash /usr/local/bin/optimusXserver -ac -config /etc/X11/xorg.conf.nvidia -sharevts -modulepath /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules -nolisten tcp -noreset :1 vt9 root 812 0.0 1.6 48368 34632 tty9 Ss+ 12:27 0:00 /usr/bin/X -ac -config /etc/X11/xorg.conf.nvidia -sharevts -modulepath /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules -nolisten tcp -noreset :1 vt9 konradk 1627 1.9 1.9 49528 40520 ? SNl 12:28 0:53 /usr/bin/virtuoso-t +foreground +configfile /tmp/virtuoso_hX1619.ini +wait konradk 4441 0.0 0.0 5320 860 pts/0 S+ 13:12 0:00 grep --color=auto X

konradk@konradk-eeepc:~$ DISPLAY=:1 glxgears Error: couldn't get an RGB, Double-buffered visual konradk@konradk-eeepc:~$

[ghost]

dardan@ubuntu:/usr/local/bin$ cat optimusXserver

!/bin/bash

LD_LIBRARY_PATH=/usr/lib/nvidia-current /usr/bin/X $@dardan@ubuntu:/usr/local/bin$

dardan@ubuntu:/usr/local/bin$ DISPLAY=:1 glxgears Error: couldn't get an RGB, Double-buffered visual

cat /var/log/Xorg.1.log CODE HERE http://wklej.org/id/530289/

dardan@ubuntu:/usr/local/bin$ ps axu |grep X root 870 0.0 0.0 3016 1280 ? S 13:21 0:00 /bin/bash /usr/local/bin/optimusXserver -ac -config /etc/X11/xorg.conf.nvidia -sharevts -modulepath /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules -nolisten tcp -noreset :1 vt9 root 875 0.1 1.4 48304 34752 tty9 Ss+ 13:21 0:00 /usr/bin/X -ac -config /etc/X11/xorg.conf.nvidia -sharevts -modulepath /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules -nolisten tcp -noreset :1 vt9 root 1145 6.1 0.8 51764 20164 tty7 Ss+ 13:21 0:46 /usr/bin/X :0 -br -verbose -auth /var/run/gdm/auth-for-gdm-iyxSKc/database -nolisten tcp vt7 dardan 1985 0.0 0.0 4156 852 pts/0 S+ 13:34 0:00 grep --color=auto X

[MrMEEE]

ok... try with newest version.. I really think this is fixed now..

[konradk]

Can you give me address where I can sand you some beer? It works!

Glxgears with optirun and without: http://wstaw.org/w/uVv/

Trine - game that doesn't work on intel, but it work on nvidia: http://wstaw.org/w/uVu/

Seriously, send me on my email address, where I can sand you beer :)

[konradk]

WebGL examples works also by "optirun chromium-browser" :) http://www.ibiblio.org/e-notes/webgl/webgl.htm

[MrMEEE]

I'm really glad to hear that we found the problem...

If you really wan't send be a beer or red bull, it can be done here:

https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=mj%40casalogic%2edk&lc=US&item_name=The%20Bumblebee%20Project%20by%20Martin%20Juhl&currency_code=EUR&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted

[konradk]

Ok, I will send somethink next week :) Big thank you.

[ghost]

GREAT JOB MARTIN IT WORKS AND ARRIVED AT 2055 frames in 5.0 seconds = 410.865 FPS

MY PC IS ACER ASPIRE 5742G WITH NVIDIA OPTIMUS GEFORCE GT 420M AND BY THE WAY DO U HAVE ANY OTHER PROJECTS WHERE I COULD BE A TESTER AS WELL

[ghost]

dardan@ubuntu:~/Desktop/MrMEEE-bumblebee-0f12427/install-files$ optirun firefox

• Starting Bumblebee X server bumblebee Enabling nVidia Card Succeded.

Warning: Fake start-stop-daemon called, doing nothing.

• . ^C[VGL] ERROR: Could not open display :1. Another bumblebee powered application is running, keeping bumblebee alive.