search

MycroftAI / enclosure-picroft

Mycroft interface for Raspberry Pi environment
https://mycroft.ai/documentation/picroft
GNU Lesser General Public License v3.0
803 stars 191 forks source link

I get "This board requires newer software" when latest stable pre-built image #164

Open rvmey opened 2 years ago

rvmey commented 2 years ago

I wrote the "Picroft Stable 2020-09-07 image" to my sd card and tried to boot it but it says, "This board requires newer software". I updated my Pi's firmware to the latest firmware, but I still get this message, so I think the latest firmware doesn't work with the latest stable version here: https://github.com/MycroftAI/enclosure-picroft

Expected behavior The latest stable version boots with the latest firmware on a Raspberry Pi 4.

krisgesling commented 2 years ago

Thanks for reporting this Russell.

The stable Picroft image is getting pretty old. We have been very focused on the Mark II and need to carve out some time to get back and update things.

gsaslis commented 1 year ago

Hitting the same issue and I just purchased an RPi 4 because it appears top of the list as "supported" on https://mycroft-ai.gitbook.io/docs/using-mycroft-ai/get-mycroft/picroft.

Could the docs perhaps be updated in the meantime, if the fix is going to take much longer?

tamblinpap commented 1 year ago

Yeah I am getting this same problem

wita-sec commented 1 year ago

Same problem with my brandnew Pi 4 B. I'm adding this note in order to get notification when there is a new Picroft image available that supports latest Pi Firmware.

wita-sec commented 1 year ago

Hi Mycroft Team, this CR is now open for about 10 months. Please can you provide a schedule for the availability of and updated Picroft image? Or don't you intend to develop this update? Please let me know.

prokopec-simon commented 1 year ago

I got into the same issue but quite easily managed to make a clean installation on the current Bullseye Raspberry Pi OS Lite version. Could probably provide the image or the instructions to do so if this is still relevant.

george-andr commented 1 year ago

Yes please, I would really like to know how to do it.

prokopec-simon commented 1 year ago

I'll make a quick guide and post the image file here later today. I haven't tested it properly yet, but there are no issues so far.

TRJ31 commented 1 year ago

I would also like to know how you got it working on an rpi 4b

amokster88 commented 9 months ago

Please can we get an idea when this issue will be solved I too just bought a Raspberry Pi 4B and getting this issue too. 🥲

amokster88 commented 9 months ago

@prokopec-simon Really would love your guide as I spent $100 on my DIY project thinking this would work but now I feel like an idiot and I don't know how to do it for myself. 🙂